• Particle and aerosol research
• /
• v.6 no.1
• /
• pp.9-20
• /
• 2010

This study examined the concentration level of the major air pollutants in public transportation. The study was conducted between February 2009 and March 2008 at Suwon-Yeosu line in Korea. $PM_{10}$ concentration level was $100{\mu}g/m^3$ on average. The $PM_{2.5}$ to PM10 ratio in transport is 0.37, which was lower than the results published by other researches. The result also demonstrated that outdoor $PM_{10}$ concentration was about 56~60% level compared to that of the cabin. $CO_2$ concentration level in the cabin was 1,359ppm, which does not exceed 2,000ppm, which is the guideline concentration level according to the Ministry of Environment. $CO_2$ concentration level in the cabin was $CO_2=23.4{\times}N+460.2$, and about 23.4ppm in $CO_2$ concentration level increased every time one passenger was added on. The experiment conducted on the train demonstrated that the average $PM_{10}$ concentration level was $100{\mu}g/m^3$ in case of the reference cabin while average $PM_{10}$ concentration level of the modified vehicle was $68{\mu}g/m^3$. Likewise, effect of the particle reduction device for the reduction of $PM_{10}$ concentration level was approximately 21%. Meanwhile there was almost no difference in the concentration level between reference and modified cabin in case of $PM_{2.5}$. Using zeolite as an adsorbent was made to reduce the $CO_2$ concentration level in the cabin. Number of passengers was factored in, to calculate the effect of the adsorption device, which demonstrated that about 36% of $CO_2$ concentration level was reduced in the modified cabin effect of the $CO_2$ reduction device. This research analyzed the current status concerning the quality of air in the public transportation and technologies were developed that reduces major air pollutants.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.2
• /
• pp.48-54
• /
• 1999

We designed the optimal device parameters of the retrograde well and the gettering layer(buried layer) using the high energy ion implantation for the next generation of CMOS struoture and proposed two models and simulated these models with Athena and Atlas, Silvaco Co. We obtained trigger currents which is more than 600 ${\mu}A/{\mu}m$ when the structure has been combined the gettering layer and the retrograde well. And the second model(twin retrograde well) was obtained that holdingcurrents were over 2500${\mu}A/{\mu}m$. As results, the more heavier dose, the more improved the latch-up immunity. The n'-p' spacing was fixed a 2${\mu}m$ in both models.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.10
• /
• pp.1943-1949
• /
• 2017

In recent years, the maker culture has realized the concept of 'making' itself through the latest technology of high technology. It is rapidly spreading as a maker's movement by sharing the production methods and information of individuals through the Internet. Countries that are leading the makers' movement expect the maker's movement to be the driving force for new value creation and economic growth from the point of view of things and the Internet. We are developing various types of open IoT platforms that can register various Internet devices and services manufactured and developed through DIY and realize interoperable services. Typical open IoT platforms require specialized API analysis capabilities and difficult access to general users due to difficult platform registration conditions and procedures. In this paper, we try to construct an open IoT platform that can be operated as a real service by creating a simple Internet application device and service application from a general manufacturer's point of view.

• Korean Journal of Optics and Photonics
• /
• v.10 no.2
• /
• pp.162-168
• /
• 1999

A new design of four-pass dye laser amplifier affording a narrow-bandwidth pulsed output is demonstrated to suppress the amplified spontaneous emission(ASE) carried by the amplifier output and reduce the possibility of parasitic oscillation in the amplifier. By the direct pulsed amplification of a cw 100 mW dye laser under a Q-switched doubled Nd:YAG laser pumping with energy of 5.6 mJ/pulse, high-peak-power pulsed output with 1.5-mJ energy in 130-MHz bandwidth is obtained corresponding to a power gain greater than $2{\times}10^6$ and an energy efficiency of 27%. The ASE ratio in the four-pass amplifier output is dramatically reduced by using a diffraction grating in the amplifier. Compared with the results obtained from the normal operation of the amplifier with no frequency-selective device, the ASE ratio is reduced by a factor in excess of 10 to remain under 1.5% of the amplifier output whereas the total output energy is slightly increased by ~4%.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.590-591
• /
• 2017

In the existing smart home, a separate platform was set up for each manufacturer to provide services through terminals. However, due to the development of Internet technology, various Internet devices and services have been launched, and there is a limit to the existing closed platforms for each manufacturer. Therefore, in this paper, we propose an object internet controller that integrates control of Internet devices in a smart home environment and provides various services through IFTTT. The proposed Internet controller is connected to the server via WiFi, and can control the Internet device and service of objects through the button input event. In addition, we expect to be able to provide a service environment that can create various smart home services by registering DIY products through open platform of oneM2M standard method.

• YAKHAK HOEJI
• /
• v.32 no.2
• /
• pp.101-111
• /
• 1988

$[^3H]$ Quinuclidinyl benzilate(QNB) binding assays were performed in the dog ventricular sarcolemma fraction enriched approx. 32-fold in sarcolemma compared to the starting homogenate to elucidate the effect of antihistaminics on cardiac muscarinic receptor. Chlorpheniramine(CHP) inhibited specific binding of $[^3H]$QNB and delayed the equilibrium binding. The rate constants at $37^{\circ}C$ for formation and dissociation of the QNB receptor complex were $0.38{\times}10^9\;M^{-1}$ and $1.6{\times}10^{-2}\;min^{-1}$, respectively. The mean value for the dissociation constant from the pairs of the rate constants was 43. 2 pM and this value was similar to the value(44.8pM) determined from Scatchard analysis. CHP decreased association rate constant, indicating increase in $K_D$ value. Decrease in affinity without affecting the binding site concentration$(B_{max})$ for $[^3H]$QNB binding by CHP was also demonstrated by Scatchard analysis. $K_i$ values for $H_i$-blockers that inhibited specific $[^3H]$QNB binding were $0.02{\sim}4.8{\mu}M$. Cimetidine with $K_i$ value of $230{\mu}M$, however, was ineffective in displacing $[^3H]$QNB binding at concentration of $50{\mu}M$. The Hill coefficient for $H_1$-blockers were about one. The results indicate that $H_1$-antihistaminics inhibit $[^3H]$ QNB binding by interaction with myocardiac muscarinic cholinergic receptor and anticholinergic side effects of these drugs are mainly due to this receptor blocking mechanism.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.1
• /
• pp.18-24
• /
• 2002

n this paper, we have fabricated pseudomorphic high electron mobility transistors (PHEMT) with a 0.2 ${\mu}{\textrm}{m}$ wide-head T-shaped gate using electron beam lithography by a dose split method. To make the T-shape gate with gate length of 0.2 ${\mu}{\textrm}{m}$ and gate head size of 1.3 ${\mu}{\textrm}{m}$ we have used triple layer resist structure of PMMA/P(MMA-MAA)/PMMA. The DC characteristics of PHEMT, which has 0.2 ${\mu}{\textrm}{m}$ of gate length, 80 ${\mu}{\textrm}{m}$ of unit gate width and 4 gate fingers, are drain current density of 323 ㎃/mm and maximum transconductance 232 mS/mm at $V_{gs}$ = -1.2V and $V_{ds}$ = 3V. The RF characteristics of the same device are 2.91㏈ of S21 gain and 11.42㏈ of MAG at 40GHz. The current gain cut-off frequency is 63GHz and maximum oscillation frequency is 150GHz, respectively.ively.

• Journal of Korean Foot and Ankle Society
• /
• v.8 no.1
• /
• pp.81-85
• /
• 2004

Purpose: The purpose of this study is to evaluate the surgical results of modified $Brostr{\ddot{o}}m$ procedure for chronic lateral ankle instability and to assess whether or not associated injuries may affect postoperative satisfaction. Materials and Methods: Twenty- four patients with chronic lateral ankle instability were evaluated retrospectively from August 1998 to March 2002. Average age was 29.3 years. All patients were performed pre & postoperative ankle anteroposterior and lateral view, stress anterior drawer and varus test using Telos device, MRI and intraoperative arthroscopic evaluations before ligament reconstruction. Results: Of the 24 cases, 23 cases was improved more than average 12 points on AOFAS scales. On modified scales of Hamilton, 3 excellent, 20 good, 1 fair results. On stress view, average 2.2 mm difference was improved on anterior drawer test and average 1.7 degree on varus test. Associated injuries were 8 osteochondral defects, 4 anterior impingements, 2 loose bodies, 2 os subfibulare, 2 os submalleolare and 2 partial ruptures of peroneus brevis. 8 cases with no associated injuries rated excellent or good. Conclusion: The modified $Brostr{\ddot{o}}m$ procedure is believed to be an effective and successful method for chronic lateral ankle instability that didn't respond to conservative treatment. Because associated injuries in chronic lateral ankle instability may affect postoperative satisfaction, appropriate detection and treatment may need for postoperative satisfaction.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.4
• /
• pp.45-50
• /
• 2004

In this paper, we present the low voltage and high efficiency Q-band MIMIC oscillator using device-level power combined structure. The oscillator was successfully integrated by using 0.1 ${\mu}{\textrm}{m}$ GaAs PHEMTS and the CPW transmission line. We show that the highest efficiency is 19 % with an output power of 2.6 ㏈m at a frequency of 34.56 ㎓. The operating voltage of the oscillator is 2.2 V which is lower voltage than that of previously reported oscillators at Q-band. And the maximum output power of 6.7 ㏈m was obtained at a frequency of 34.56 ㎓.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.688-691
• /
• 2004

In this study, we synthesized a new red emitting material of a Red225 doped into $Alq_3$ (tris(8-quinolinolato)aluminum (III)) and fabricated white organic light-emitting diodes (OLEDs) with a simple device structure. With a blue emitting material of DPVBi (4,4'-bis(2,2'-diphenylvinyl)1,1'-biphenyl) that can transfer effectively both a hole and an electron, OLEDs with a narrow emission layer could be possible without a hole-blocking layer. Consequently, the driving voltage and stability of devices have been improved. The devices show the Commission Internationale d'Eclairage (CIE) chromaticity coordinates of (0.36, 0.35) at luminance of 2000 cd/$m^2$. The luminous efficiency is about 3.5 cd/A, luminance is about 12000 cd/$m^2$ and current density is about 350 mA/$cm^2$ at 12 V, respectively.