• Transactions of Materials Processing
• /
• v.17 no.4
• /
• pp.257-262
• /
• 2008

The control of wire temperature is very important in the fine wire drawing process. The wire speed should be increased, and the wire temperature should be dropped as much as possible. Up to now, the process design of wire drawing process depends on the experiences of experts. In this study, a wire drawing process design method was proposed to increase the productivity. The proposed method of this study includes the pass schedule and the design of a multi pass wire drawing machine. A pass schedule was performed based on the calculation of the wire temperature. Also, a new multi pass wire drawing machine was manufactured to apply the designed pass schedule. Through the wire drawing experiment, the effectiveness of the proposed process design method was evaluated. The final drawing speed was increased from 1,100m/min to 2,000m/min without deterioration of final drawn wire.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.1
• /
• pp.52-65
• /
• 2016

The electronic toll collection system(ETCS), is globally used in about 40 countries. In Korea, the Korea Expressway Corporation led the nationwide introduction of the ETC system in 2007 under the brand name of the Hi-pass. Since then, Hi-pass, with its rate of average daily use reaching about 70%, has become an essential facility in Korean expressways. To identify users' perception on Hi-pass (satisfaction, preference, etc.), this study conducted a Modified Importance-Performance Analysis (M-IPA). With this, this study attempted to identify the kind of efforts necessary to enhance current Hi-pass users' convenience and satisfaction. According to the result of M-IPA, the items including "non-stop payment" and "toll discount" are identified as key items that require further improvement. For improvement in the "non-stop payment" item, operations of Hi-pass toll booths appropriate for the demand for Hi-pass use and the selection of Hi-pass booths' locations in consideration of entry and exit lanes need to be improved. In addition, with regard to the "toll discount" item, although toll discount is currently provided to Hi-pass users, thus, PR thereof will have to be strengthened. It is expected that this study will be used as basic data to devise methods of enhancing Hi-pass usage through improvement of Hi-pass users' satisfaction.

• The Journal of Korean Medicine
• /
• v.33 no.1
• /
• pp.148-159
• /
• 2012

Objectives: This study investigated the correlation among Postural Assessment Scale for Stroke (PASS), Timed "Up and Go" Test (TUG) and gait (velocity, cadence, step-length, stride-length and single-limb support). Methods: The 70 subjects were assessed on trunk control measured with the use of the PASS, dynamic balance (TUG) and gait function (by GAITRite). The data were analyzed using Pearson product correlation. Results: The PASS total scores were significantly correlated with PASS-M, PASS-C, and PASS-T (r =.80 ~ .88 p<.01). All items of the PASS were significantly correlated with TUG (r = -.63 ~ -.81 p<.01), velocity (r = .44~.58 p<.01), cadence (r =.38 ~.51. p<.01), affected side step length (r = .44 ~.56 p<.01) and affected side stride length (r = .45 ~.59 p<.01). But affected side single-limb support was lowly correlated with PASS-M, PASS-C, PASS-T and PASS-total (r = .25~.36 p<.05). Conclusions: Measures of trunk control were significantly related with values of dynamic balance and gait. Based on these results, trunk control is an essential core component of balance and gait. Trunk control training programs after stroke should be developed and emphasized.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.11a
• /
• pp.71-77
• /
• 2002

The Production of fine wire through wet wire drawing process with appropriate pass schedule would be impossible without understanding of relationship among many process parameters. Therefore, this paper investigates the relationship among process parameters of wet wire drawing process. In this study, it is possible to obtain the important basic data that can be used in the pass schedule of multi-pass wet wire drawing process. In order to verify the effectiveness of the analysis, pass redesign was performed based on the result of analysis to reduce the wire breakage. The wire breakage between the conventional pass schedule and the redesigned pass schedule was compared by the FE analysis and the wet win drawing experiment.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.10a
• /
• pp.91-92
• /
• 2009

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1632-1636
• /
• 2007

Generally, fine high carbon steel wire is produced using a multi-pass drawing process with speeds over 1000 m/min. The productivity of the wire drawing mainly depends on achieving the highest drawing speed without breaking the wire. In the multi-pass drawing, as the final drawing speed increases, the temperature rises several hundred Celsius. High temperature of wire increases the brittleness and leads to breaks. The objective of this study is to design pass schedule and wire drawing machine for superhigh speed. In the drawing experiment, it was possible to increase the productivity through the increase in final speed from 1100 m/min to 2000 m/min.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.10a
• /
• pp.216-219
• /
• 2001

The production of fine wire through multi-pass wet wire drawing process would be impossible with no backtension at inlet of dies. Backtension is affected by many process parameters, such as dies reduction, coiling number of wire at capstan, machine constant, slip between wire and capstan, characteristic of lubricant and so on. Up to date, dies design and dies pass schedule of multi-pass wet wire drawing process have performed by trial and error of expert in the Industrial field without consideration of quantitative relation among process variables. Thus study investigates the multi-pass wet wire drawing process considering the relation among process variables, such as dies reduction, coiling number of wire at capstan, machine constant, slip between wire and capstan, etc. And analysis program which can analyze many important process values(drawing force, backtension force, slip rate, slip velocity rate, etc) for die design and dies pass schedule of multi-pass wet wire drawing process was developed.

• Transactions of Materials Processing
• /
• v.21 no.4
• /
• pp.265-270
• /
• 2012

In this study, a process design method for the multi-pass shape drawing is proposed with consideration of the drawing stress. First, the shape drawing load was calculated to evaluate the shape drawing stress, and the intermediate die shape was determined by using an electric field analysis and the average reduction ratio. In order to evaluate whether material yielding occurs at the die exit, the drawing stress was determined by using the calculated shape drawing load. Finally, FE-analysis and shape drawing experiments were conducted to validate the design of the multi-pass shape drawing process. From the results of the FE-analysis and shape drawing experiments, it was possible to produce a sound shape drawn product with the designed process. The dimensional tolerances of the product were within the allowable tolerances.

• Korean Journal of Remote Sensing
• /
• v.17 no.3
• /
• pp.231-242
• /
• 2001

In 2-pass differential SAR interferometry(DInSAR), the topographic phase signature can be removed by using a digital elevation model(DEM) to isolate the contribution of deformation from interferometric phase. This method has an advantage of no unwrapping process, but applicability is limited by precision of the DEM used. The residual phase in 2-pass differential interferogram accounts for error of DEM used in the processing provided that no actual deformation exits. The objective of this paper is a preliminary study to improve DEM precision using low precision DEM and 2-pass DInSAR technique, and we applied the 2-pass DInSAR technique to Asan area. ERS-1/2 tandem complex images and DTED level 0 DEM were used for DInSAR, and the precision of resulting DEM was estimated by a 1:25,000 digital map. The input DEM can be improved by simply adding the DInSAR output to the original low precision DEM. The absolute altitude error of the improved DEM is 9.7m, which is about the half to that of the original DTED level 0 data. And absolute altitude error of the improved DEM is better than that from InSAR technique, 15.8m. This approach has an advantage over the InSAR technique in efficiently reducing layover effects over steep slope region. This study demonstrates that 2-pass DInSAR can also be used to improve DEM precision.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.427-430
• /
• 2005

Improving the productivity of steel cord is required due to the increase in demand for it, even though steel cord being used as a reinforcement of a tire has been produced at multi-pass wet wire drawing process over 1000m/min. To improve the productivity, if just increase drawing speed, it causes temperature rise, fracture arisen by embrittlement during drawing process. To increase drawing speed affecting productivity, the variation of wire temperature during multi-pass wet wire drawing process is investigated in this study. In result, the multi-pass wet wire drawing process is redesigned. The redesigned wet drawing process with 27 passes efficiently controls wire temperature during drawing process. It, therefore, enables drawing process to be possible at ultra high speed with 2000m/min. It becomes possible to improve the productivity of steel cord in this paper because the increase in drawing speed could be achieved.