• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.3
• /
• pp.293-299
• /
• 1998

This study was undertaken to measure the concentrations of estradiol-$17{\beta}$, progesterone and testosterone, and to study their relationship with each other and with follicular size in individual buffalo ovarian follicles categorized as small (4 to 5 mm diameter), medium (6 to 9 mm diameter) and large (${\geq}10mm$ diameter). Steroid hormone concentrations varied markedly within follicles of each size category. Estradiol-$17{\beta}$ concentrations (pmol/ml) were positively related to follicular diameter (R = 0.34, n = 308, p < 0.001) and were significantly higher (p < 0.001) in large (1$118.46{\pm}30.25$), compared to those in medium follicles ($50.32{\pm}8.29$) which, in turn were significantly higher (p < 0.001) than those in small follicles ($19.70{\pm}$5.57). Progesterone and testosterone concentrations (pmol/ml) were not related to follicular diameter and were not different among small ($330.99{\pm}27.32$ and $17.68{\pm}2.44$ respectively), medium ($384.84{\pm}26.20$ and $36.47{\pm}4.55$, respectively) and large follicles ($253.25{\pm}32.23$ and $22.57{\pm}4.48$, respectively). Estradiol-$17{\beta}$ and progesterone concentrations were positively related (R = 0.39, n = 47, p < 0.01) in small, unrelated in medium and negatively related in large follicles (R = -0.59, n = 23, p < 0.01). There was no relationship between estradiol-$17{\beta}$ and testosterone concentrations in follicles of all the three size categories. Progesterone and testosterone concentrations were positively related in large follicles (R = 0.57, n = 18, p < 0.02). There was no relationship between the two hormones in small and medium sized follicles. When the follicles with estradiol-$17{\beta}$/progesterone molar ratios of > 1.00 were considered non-atretic, and the rest at different stages of atresia, 197/208(95%) follicles were found to be atretic.

• Geomechanics and Engineering
• /
• v.8 no.1
• /
• pp.113-132
• /
• 2015

In this study, lime (L), silica fume (SF), and lime-silica fume (L-SF) mix have been used for stabilizing and considering their effects on the soft clay soil. The improvement technique adopted in this study includes improving the behaviour, of a square footing over soft clay through grouting the clay with a slurry of lime-silica fume before and after installation of the footing. A grey-colored densified silica fume is used. Three percentages are used for lime (2%, 4% and 6%) and three percentages are used for silica fume (2.5%, 5%, 10%) and the optimum percentage of silica fume is mixed with the percentages of lime. Several tests are made to investigate the soil behaviour after adding the limeand silica fume. For grouting the soft clay underneath and around the footing, a 60 ml needle was used as a liquid tank of the lime-silica fume mix. Slurried silica fume typically contains 40 to 60% silica fume by mass. Four categories were studied to stabilize soft clay before and after footing construction and for each category, the effectiveness of grouting was investigated; the effect of injection hole spacing and depth of grout was investigated too. It was found that when the soft clay underneath or around a footing is injected by a slurry of lime-silica fume, an increase in the bearing capacity in the range of (6.58-88)% is obtained. The footing bearing capacity increases with increase of depth of grouting holes around the footing area due to increase in L-SF grout. The grouting near the footing to a distance of 0.5 B is more effective than grouting at a distance of 1.0 B due to shape of shear failure of soft clay around the footing.

• Environmental Engineering Research
• /
• v.13 no.1
• /
• pp.1-7
• /
• 2008

Recently a new technology called the flexible-fiber deep-bed filter (FDF) claimed to replace the conventional sand filter including coagulation and sedimentation filter (CSF) processes in the water treatment plant. Therefore the life cycle assessment (LCA) approach was applied for evaluating the life cycle impacts of FDF compared with those of CSF. The used LCA softwares were the Simapro 6 and PASS and their life cycle impact assessment (LCIA) methodologies were the Eco-indicator 99 and the Korean Eco-indicator, respectively. The goal of this LCA was to identify environmental loads of CSF and FDF from raw material to disposal stages. The scopes of the systems have been determined based on the experiences of existing CSF and FDF. The function was to remove suspended solids by filtration and the functional unit was $1\;m^3$/day. Both systems showed that most environmental impacts were occurred during the operation stage. To reduce the environmental impacts the coagulants and electricity consumptions need to be cut down. If the CSF was replaced with the FDF, the environmental impacts would be reduced in most of the impact categories. The LCA results of Korean Eco-indicator and Eco- indicator99 were quite different from each other due to the indwelling differences such as category indicators, impact categories, characterization factors, normalization values and weighting factors. This study showed that the life cycle assessment could be a valuable tool for evaluating the environmental impact of the new technology which was introduced in water treatment process.

• KIEAE Journal
• /
• v.13 no.6
• /
• pp.23-28
• /
• 2013

Green Standard for Energy and Environmental Design(G-SEED) has been used for environmental friendly building certification since 2002. The certification criteria initialed with multi-residential building and now it expands to 10 criteria for new and existing building types. The purpose of this study is to understand current recognition of G-SEED from the survey of multi-complex residences in newtown. From the general question, 75.2% of responders answered the period of living term between 1~3 years, 58.6% lived in $102.48{\sim}132.23m^2$ residential area and 65.2% owned their residences. The 43.2% of respondents recognized that their residences gained G-SEED certification by G-SEED emblem(31.6%). This is the significant meaning to understand public recognition of G-SEED and how to approach the strategy for raising the G-SEED recognition. The responders expected positive influence for economical value from G-SEED and also 75.3% of responders agreed with that G-SEED would be a decision make to buy and rent their residences. Second, residents responded that the consideration issue for green building is energy & prevention of environmental pollution(27.7%) which carries equal concern in G-SEED criteria category. The result of this survey verifies that the current level recognition of G-SEED of the responder's perspectives still is not well-known but it confirmed they have a positive expectation. Therefore, from this result, G-SEED needs to draw road map with detail plans for developing G-SEED with public participation.

• Journal of Environmental Health Sciences
• /
• v.43 no.3
• /
• pp.240-246
• /
• 2017

Objectives: This study was conducted to evaluate the vulnerability of the human health sector to $PM_{10}$ due to climate change in Incheon over the period of 2005-2014. Methods: Vulnerability to $PM_{10}$ consists of the three categories of climate exposure, sensitivity, and adaptive capacity. The indexes for climate exposure and sensitivity indicate positive effects, while adaptive capacity shows a negative effect on vulnerability to $PM_{10}$. The variables in each category were standardized by the rescaling method, and respective relative regional vulnerability was analyzed through the vulnerability index calculation formula of the Intergovernmental Panel on Climate Change. Results: Regions with a high exposure index were the western and northern urban areas with industrial complexes adjacent to a highway, including Bupyong-gu and Seo-gu. Major factors determining the climate exposure index were the $PM_{10}$ concentration, days of $PM_{10}$ >= $100{\mu}g/m^3$, and $PM_{10}$ emissions. The regions showing a high sensitivity index were urban regions with high populations; these commonly had a high mortality rate for related diseases and vulnerable populations. Conclusions: This study is able to support regionally adjusted adaptation policies and the quantitative background of policy priority since it provides information on the regional health vulnerability to $PM_{10}$ due to climate change in Incheon.

• Fashion & Textile Research Journal
• /
• v.20 no.4
• /
• pp.464-473
• /
• 2018

The objective of this study is to develop a sizing system of fitness clothing that can properly accommodate various body sizes of Korean senior women. The sizing system of upper and lower fitness clothing was developed in the present study by selection of key variables, identification of size category candidates, and determination of an optimal sizing system. First, key anthropometric dimensions (stature and bust circumference for upper clothing and stature; waist circumference for lower clothing) were identified by factor analysis on the direct body measurements (n = 272) and 3D whole-body scan data (n = 271) of Korean senior women in Size Korea. Second, sizing system candidates based on the key dimensions of upper and lower clothing were explored using a grid method and an optimization method. Lastly, among the sizing system candidates, optimal sizing systems of upper and lower clothing were selected in terms of accommodation rate. Five size categories (short/small, short/medium, tall/small, tall/medium, and tall/large) were selected as the optimal sizing systems of upper and lower clothing with 89% and 78% of accommodation rate, respectively, for the Korean senior women. The anthropometric characteristics of the representative humans of the optimal size categories would be of use in the design of fitness compressive wear for the better fit and effectiveness of exercise and health of Korean senior women.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.3
• /
• pp.1313-1323
• /
• 2016

To study the full health effects of parental radiation exposure on the children of the atomic bomb survivors, the Radiation Effects Research Foundation developed a cohort of 76,814 children born to atomic bomb survivors (F1 generation) to assess cancer incidence and mortality from common adult diseases. In analyzing radiation-associated health information, it is important to be able to adjust for sociodemographic and lifestyle variations that may affect health. In order to gain this and other background information on the F1 cohort and to determine willingness to participate in a related clinical study, the F1 Mail Survey Questionnaire was designed with questions corresponding to relevant health, sociodemographic, and lifestyle indicators. Between the years 2000 and 2006, the survey was sent to a subset of the F1 Mortality Cohort. A total of 16,183 surveys were completed and returned: 10,980 surveys from Hiroshima residents and 5,203 from Nagasaki residents. The response rate was 65.6%, varying somewhat across parental exposure category, city, gender, and year of birth. Differences in health and lifestyle were noted in several variables on comparison across city and gender. No major differences in health, lifestyle, sociodemographics, or disease were seen across parental exposure categories, though statistically significant tests for heterogeneity and linear trend revealed some possible changes with dose. The data described herein provide a foundation for studies in the future.

• Journal of Korean Society of Disaster and Security
• /
• v.6 no.2
• /
• pp.1-8
• /
• 2013

This study is concerned with the estimation of fluctuate wind velocity statistic properties in the major cities reflecting the recent meteorological with largest data samples (yearly 2003-2012). The basic wind speeds were standardized homogeneously to the surface roughness category C, and to 10m above the ground surface. The estimation of the extreme of non-Gaussian load effects for design applications has often been treated tacitly by invoking a conventional wind design (gust load peak factor) on the basis of Gaussian processes. This assumption breaks down when the loading processes exhibits non-Gaussianity, in which a conventional wind design yields relatively non conservative estimates because of failure to include long tail regions inherent to non-Gaussian processes. This study seeks to ascertain the probability distribution function from recently wind data with effected typhoon & maximum instantaneous wind speed.

• Journal of the Korean Society of Physical Medicine
• /
• v.6 no.1
• /
• pp.1-8
• /
• 2011

Purpose : The purpose of this study was to find out the effect of closed kinetic chain exercise with functional electrical stimulation(FES) of the gluteus medius on gait in stroke. Methods : 30 hemiplegic patients voluntarily participated in this study. Subjects were divided into experimental group(n=15) and control group(n=15). Experimental group was given closed kinetic chain exercise with FES of the gluteus medius and control group was given only closed kinetic chain exercise for 4 weeks. All subjects were measured 10m-walking speed, cadence, functional walking category(FAC) and modified motor assessment scale(MMAS) before and after intervention. Results : In experimental group, gait velocity, cadence, FAC and MMAS showed significant difference between pre and post test(p<.05). In control group, gait velocity, cadence and FAC showed significant difference between pre and post test(p<.05). Before intervention, gait velocity, cadence, FAC and MMAS were not significant difference between experimental group and control group(p>.05), but after intervention, gait velocity, FAC and MMAS were significant difference(p<.05). Conclusion : This study show that closed kinetic chain exercise with functional electrical stimulation(FES) of the gluteus medius is beneficial intervention for increase the wlking ability in stroke.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.6
• /
• pp.885-892
• /
• 2011

In this study, LCA(Life Cycle Assessment) on 'Saemangum CSO Project' was carried out to evaluate environmental impact which occurred during the construction and operation periods and the potential environmental impact reduction was analyzed by comparing production and reduction level of pollution loads. LCA was conducted out according to the procedure of ISO14040 which suggested Goal and Scope Definition, Life Cycle Inventory Analysis, Life Cycle Impact Assessment and Interpretation. In the Goal and Scope Definition, the functional unit was 1 m3 of CSO, the system boundary was construction and operation phases, and the operation period was 20 years. For the data collection and inventory analysis, input energies and materials from civil, architecture, mechanical and electric fields are collected from design sheet but the landscape architecture field is excepted. LCIA(Life Cycle Impact Assessment) was performed following the procedure of Eco-Labelling Type III under 6 categories which were resource depletion, eutrophication, global warming, ozone-layer destruction, and photochemical oxide formation. In the result of LCA, 83.4% of environmental impact occurred in the construction phase and 16.6% in the operation phase. Especially 78% of environmental impact occurred in civil works. The Global warming category showed the highest contribution level in the environmental impact categories. For the analysis on potential environmental impact reduction, the reduction and increased of environmental impact which occurred on construction and operation phases were compared. In the case of considering only the operation phase, the result of the comparison showed that 78% of environmental impact is reduced. On the other hand, when considering both the construction and operation phases, 50% of environmental impact is increase. Therefore, this study showed that eco-friendly material and construction method should be used for reduction of environmental impact during life cycle, and it is strongly necessary to develop technology and skills to reduce environmental impact such as renewable energies.