• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.5
• /
• pp.1-6
• /
• 2007

This paper presents a new experimental Servo-Parameter tuning technique for a 6-axes articulated robot manipulator, especially considering robot's dynamics. First of all, investigation for proportional gain of velocity control loop by using a Dynamic Signal Analyzer(DSA) is performed. Using the FUNCTION characteristic of DSA based on the Bode plot, the Bode plot of open loop transfer function can be obtained. In turn, the integral gain of a servo controller can be found out by using the integration time constant extracted from the Bode plot of open loop transfer function. In the meanwhile, the positional gain of the servo controller can be obtained by using the Bode plot of the closed loop transfer function. Using the experimental gain tuning technique proposed in this paper, the testing linear motion of DR6-II robot has been shown to be more accurate rather than the motion with a conventional(empirical) gain tuning technique in Doosan Mecatec Co., Ltd., by improving the dynamic response of the robot as well as synchronizing each joint velocity according to the positional command of an end-effector.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1853-1858
• /
• 2004

This paper presents the development of a full order sliding mode controller for tracking problem of a class of uncertain dynamical system, in particular, the direct drive robot manipulators. By treating the arm as an uncertain system represented by its nominal and bounded parametric uncertainties, a new robust fullorder sliding mode tracking controller is derived such that the actual trajectory tracks the desired trajectory as closely as possible despite the non-linearities and input couplings present in the system. A proportional-integral sliding surface is chosen to ensure the stability of overall dynamics during the entire period i.e. the reaching phase and the sliding phase. Application to a three DOF direct drive robot manipulator is considered.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.6
• /
• pp.122-127
• /
• 1996

The achievement of the optimal condition for the task of an industrial articulated robot used in many fields is an important problem to improve productivity. In this paper, a minimum-time trajectory for an articulated robot along the specified path is studied and simulated with a proper example. A general dynamic model of manipulator is represented as a function of path distance. Using this model, the velocity is produced as fast as possible at each point along the path. This minimum-time trajectory planning module together with the existing collision-free path planning modules is utilized to design the optimal path planning of robot in cases where obstacles present.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.478-482
• /
• 1996

This paper presents a new approach to the design of adaptive control system using DSPs(TMS320C50) for robotic manipulators to achieve trajectorytracking angles. Digital signal processors are used in implementing real time adaptive control algorithms to provide motion for robotic manipulators. In the proposed scheme, adapation laws are derived from the improved second stability analysis based on the indirect adaptive control theory.l The proposed control scheme is simple in structure, fast in computation, an suitable for implementation of real-time control. Moreover, this scheme does not requre an accurate dynamic modeling, nor values of manipulator paramenters and payload Performance of the adaptive controller is illustrated by exeperimental results for a SCARA robot.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.210-216
• /
• 2002

본 연구는 오이 수확기 개발을 위해 메니퓰레이터를 설계 제작하였다. 실험에 사용한 3축 메니퓰레이터는 견고성, 내구성, 모멘트를 줄이기 위해 모터 및 감속기 등이 하중이 실리지 않는 곳에 장착하였다. 주요 연구 결과를 요약하면 다음과 같다. 1) 3차원 공간상의 좌표에 대하여 메니퓰레이터의 10회 반복 위치 오차는 Z축에 관계없이 0.1mm 내외로 정확하게 작동하는 것으로 나타났다. 2) 실내 실험에서 25개의 오이에 대한 실험 결과 22개의 절단하여 92%의 성공률을 보였으나, 원인은 오이가 기형과이며, 수확한 후 시간이 경과하여 오이 과병의 물성이 변한 것으로 판단된다. 3) 실내 실험에서 오이 과병을 절단하지 못한 경우에도 메니퓰레이터는 오이에 0.1m 내외로 엔드이펙터을 접근시켰다. 4) 50개의 오이에 대하여 현장 실험을 한 결과 42개, 84%의 절단율을 보였다. 오차가 16% 발생한 것은 수확적기가 지나서 오이의 과병이 짧고 뭉툭해서 나타난 것으로 판단된다.

• Journal of Drive and Control
• /
• v.11 no.3
• /
• pp.22-30
• /
• 2014

In this research, the energy stability level method is used for examining the stable state of Field Robot under effects of swing motion, at particular postures of manipulator, and terrain conditions. The energy stability level is calculated by using the dynamic models of Field Robot, subjected to the concept of equilibrium plane and support boundary. The results, simulated by using computing program for estimating the potential overturning of Field Robot, supply useful predictions of stability analysis for designers and operators.

• 제어로봇시스템학회:학술대회논문집
• /
• 1998.10a
• /
• pp.340-345
• /
• 1998

A virtual reality system is implemented for the operator supervising a robot's operation at a remote site. For this implementation, a two D.O.F force-reflective joystick is designed to reflect the force/torque measured at the end of robotic manipulator and to generate the motion command for the robot by the operator using this joystick. In addition, the visual information that is captured by a CCD camera, is transmitted to the remote operator and is displayed on a CRT monitor. The operator who is holding the force reflective joystick and watching the CRT monitor can resolve unexpected problems that the robot confronts with. That is, the robot performs the tasks autonomously unless it confronts with unexpected events that can be resolved by only the operator. To demonstrate the feasibility of this system, a remote peg-in-hole operation is implemented and the experimental data are shown.

• Annual Conference of KIPS
• /
• 2021.05a
• /
• pp.533-535
• /
• 2021

본 연구에서는 서비스 역할을 수행하는 6축 모듈형 매니퓰레이터 개발을 목표로 하며, 최종 기술 사양에 따른 설계를 진행하는 과정에서 기구의 섬세한 동작을 효율적으로 제어하기 위해 로봇 제어 소프트웨어의 오픈소스 환경인 ROS를 사용한다. 매니퓰레이터의 동작 설계를 ROS 기반에서 제어하기 위해 중요한 기본 환경을 구축하였으며, 특히 로봇 모델링을 위한 시각화를 위해 URDF파일에 해당 매니퓰레이터의 필수 파라미터값들을 지정하여 적용하였고, 전체 동작 시나리오에 맞춰 매니퓰레이터가 특정 자세를 취할 경우의 역기구학적인 해석과 그에 따른 경로를 생성하도록 매니퓰레이터의 라이브러리인 MoveIt을 활용하여 시각적으로 표현하고 시뮬레이션을 수행하였다. 또한, 설계한 ROS 환경 설계 방법을 바탕으로 MCU와의 통신을 통해 모터의 실시간 각도 값을 제어하고, 3D 깊이 카메라의 거리정보와 이미지 정보의 융합을 통해 로봇의 서비스 내용의 개선을 기대할 수 있다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1068-1073
• /
• 2005

Development of a locomotive mechanism for the capsule type endoscopes will largely enhance the ability to diagnose disease of digestive organs. In connection with it, most of the researches have focused on an installable locomotive mechanism in the capsule. In this paper, it is introduced that the movement of a capsule type endoscope in digestive organ can be manipulated by magnetic force produced outside human body. Since the magnetic force is provided by permanent magnets, no additional power supply to the capsule is required. Using a robotic manipulator for locating the external magnet, the capsule motion control system can cover the whole human digestive organs. This study is particularly concentrated on dither motion effect to improve the mobility of capsule type endoscope. It was experimentally found out that the friction coefficient between the capsule and digestive organ can be remarkably reduced by superposing yawing or rolling dither motion on the translatory motion. In this paper, the experimental results obtained while the direction, amplitude and frequency of sinusoidal dither motion were changed are reported.

• The Journal of Korea Robotics Society
• /
• v.15 no.4
• /
• pp.375-384
• /
• 2020

Today's robots consist of many hardware and software subsystems, depending on the functions needed for specific tasks. Integration of subsystems can require a great deal of effort, as both the communication method and protocol of the subsystem can vary. This paper proposes an expandable robotic system in which all subsystems are integrated under Robot Operation System (ROS) framework. To achieve this, the paper presents a software library, ROS_M, developed to implement the TCP/IP-based ROS communication protocol in different control environments such as MCU and RT kernel based embedded system. Then, all the subsystem including hardware can use ROS protocol consistently for communication, which makes adding new software or hardware subsystems to the robotic system easier. A latency measurement experiment reveals that the system built for loop control can be used in a soft real-time environment. Finally, an expandable mobile manipulator robot is introduced as an application of the proposed system. This robot consists of four subsystems that operate in different control environments.