• Nuclear Engineering and Technology
• /
• v.53 no.7
• /
• pp.2126-2132
• /
• 2021

Various research groups and private interprises are pursuing the design of a Molten Salt Reactor (MSR) as one of the Generation-IV concepts. In the current work a fast neutron MSR using chloride fuel is analyzed, specially analyzing the power production and neutron flux level in the Intermediate Heat Exchanger (IHX). The neutronic analysis in this work is based on a chloride-fuel MSR with 600 MW thermal power. The core power density was set to 100 MW m-3 with a core H/D [[EQUATION]] 1.0 amd four Intermediate Heat Exchanger (IHX). This leads to a power of 150 MW per IHX; this power is also comparable to the IHX proposed in the SAMOFAR framework. In this work, a preliminary design of a 150 MW helical-coil IHX for a chloride-fueled MSR is prepared and the fission rate, capture rate, and inelastic scatter rate are evaluated.

• International Journal of Computer Science & Network Security
• /
• v.21 no.4
• /
• pp.289-300
• /
• 2021

Non-abelian group based Cryptography is a field which has become a latest trend in research due to increasing vulnerabilities associated with the abelian group based cryptosystems which are in use at present and the interesting algebraic properties associated that can be thought to provide higher security. When developing cryptographic primitives based on non-abelian groups, the researchers have tried to extend the similar layouts associated with the traditional underlying mathematical problems and assumptions by almost mimicking their operations which is fascinating even to observe. This survey contributes in highlighting the different analogous extensions of traditional assumptions presented by various authors and a set of open problems. Further, suggestions to apply the Hamiltonian Cycle/Path Problem in a similar direction is presented.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.744-745
• /
• 2015

Since the G20 summit in 2011, South Korea who was dependent on foreign energy needs of 97% receives natural gas from Russia from 2015 to 30 years, but South Korea is a situation of scarce experience and skills of pipeline project in permafrost area. In this study, we kept the target for analyzing the data and information flow of the pipeline projects in permafrost area, and the ultimate goal is set to developing the hierarchy structure of design and construction data for an efficient administration of the project. In order to develop that structure, Configuration Management was introduced and through this method, it is expected to be used to build the overall information management system in O&M phase.

• Journal of Biosystems Engineering
• /
• v.3 no.1
• /
• pp.1-19
• /
• 1978

Power tiller is a major unit of agricultural machinery being used on farms in Korea. About 180.000 units are introduced by 1977 and the demand for power tiller is continuously increasing as the farm mechanization progress. Major farming operations done by power tiller are the tillage, pumping, spraying, threshing, and hauling by exchanging the corresponding implements. In addition to their use on a relatively mild slope ground at present, it is also expected that many of power tillers could be operated on much inclined land to be developed by upland enlargement programmed. Therefore, research should be undertaken to solve many problems related to an effective untilization of power tillers on slope ground. The major objective of this study was to find out the travelling and tractive characteristics of power tillers being operated on general slope ground.In order to find out the critical travelling velocity and stability limit of slope ground for the side sliding and the dynamic side overturn of the tiller and tiller-trailer system, the mathematical model was developed based on a simplified physical model. The results analyzed through the model may be summarized as follows; (1) In case of no collision with an obstacle on ground, the equation of the dynamic side overturn developed was: $$\sum_n^{i=1}W_ia_s(cos\alpha cos\phi-{\frac {C_1V^2sin\phi}{gRcos\beta})-I_{AB}\frac {v^2}{Rr}}=0$$ In case of collision with an obstacle on ground, the equation was: $$\sum_n^{i=1}W_ia_s\{cos\alpha(1-sin\phi_1)-{\frac {C_1V^2sin\phi}{gRcos\beta}\}-\frac {1}{2}I_{TP} \( {\frac {2kV_2} {d_1+d_2}\)-I_{AB}{\frac{V^2}{Rr}} \( \frac {\pi}{2}-\frac {\pi}{180}\phi_2 \} = 0 $$ (2) As the angle of steering direction was increased, the critical travelling veloc\ulcornerities of side sliding and dynamic side overturn were decreased. (3) The critical travelling velocity was influenced by both the side slope angle .and the direct angle. In case of no collision with an obstacle, the critical velocity $V_c$ was 2.76-4.83m/sec at $\alpha=0^\circ$, $\beta=20^\circ$ ; and in case of collision with an obstacle, the critical velocity $V_{cc}$ was 1.39-1.5m/sec at $\alpha=0^\circ$, $\beta=20^\circ$ (4) In case of no collision with an obstacle, the dynamic side overturn was stimu\ulcornerlated by the carrying load but in case of collision with an obstacle, the danger of the dynamic side overturn was decreased by the carrying load. (5) When the system travels downward with the first set of high speed the limit {)f slope angle of side sliding was $\beta=5^\circ-10^\circ$ and when travels upward with the first set of high speed, the limit of angle of side sliding was $\beta=10^\circ-17.4^\circ$ (6) In case of running downward with the first set of high speed and collision with an obstacle, the limit of slope angle of the dynamic side overturn was = $12^\circ-17^\circ$ and in case of running upward with the first set of high speed and collision <>f upper wheels with an obstacle, the limit of slope angle of dynamic side overturn collision of upper wheels against an obstacle was $\beta=22^\circ-33^\circ$ at $\alpha=0^\circ -17.4^\circ$, respectively. (7) In case of running up and downward with the first set of high speed and no collision with an obstacle, the limit of slope angle of dynamic side overturn was $\beta=30^\circ-35^\circ$ (8) When the power tiller without implement attached travels up and down on the general slope ground with first set of high speed, the limit of slope angle of dynamic side overturn was $\beta=32^\circ-39^\circ$ in case of no collision with an obstacle, and $\beta=11^\circ-22^\circ$ in case of collision with an obstacle, respectively.

• Proceedings of the KSPS conference
• /
• 1997.07a
• /
• pp.142-143
• /
• 1997

The purpose of this paper is to assess the psychological status of the phoneme, syllable, and various postulated subsyllabic units in Korean by applying the Sound Similarity Judgment (SSJ) task, to compare the results with those in English, and to discuss the advantage and disadvantage of the SSJ task as a tool for linguistic research. In Experiment 1, 30 subjects listened to pairs of 56 eve words which were systematically varied from 'totally different' (e.g., pan-met) to 'identical' (e.g., pan-pan). Subjects were then asked to rate sound similarity of each pair on a 10-point scale. Not very surprisingly, there was a strong correlation between the number of phonemic segments matched and the similarity score provided by the subjects. This result was in accord with the previous results from English (e.g., Vitz & Winkler, 1973; Derwing & Nearey, 1986) and supported the assumption that the phoneme is the basic phonological unit in Korean and English. However, there were sharply contrasting results between the two languages. When the pairs shared two phonemes (e.g., pan-pat; pan-pen; pan-man), the pairs sharing the fIrst two phonemes were judged significantly more similar than the other two types of pairs. Quite to the contrary, in the comparable English experiments, the pairs sharing the last two phonemes were judged significantly more similar than the other two types of pairs. Experiment 2 was designed to conflrm the results of Experiment 1 by controlling the 'degree' of similarity between phonemes. For example, the pair pan-pam can be judged more similar than the pair pan-nan, although both pairs share the same number of phonemes. This could be interpreted either as confirming the result of Experiment 1 or as the fact that /n/ is more similar to /m/ than /p/ is to /n/ in terms of shared number of distinctive features. The results of Experiment 2 supported the former interpretation. Thus, the results of both experiments clearly showed that, although the 'number' of matched phonemes is the important predictor in judging sound similarity of monosyllabic pairs of both languages, the 'position' of the matched phonemes exerts a different influence in judging sound similarity in the two languages. This contrasting set of results may provide interesting implications for the internal structure of the syllable in the two languages.

• Korean Journal of Pharmacognosy
• /
• v.40 no.4
• /
• pp.298-302
• /
• 2009

Samultang is one of traditional medicine composed of Paeonia lactiflora, Angelica gigas, Rehmannia glutinosa and Cnidium officinale. To develop simultaneous determination of paeoniflorin, decursin and 5-HMF in Samultang, a high performance liquid chromatography with diode array detector was used. To separate three marker components, Dionex $C_{18}$ column (5 ${\mu}m$, 120 ${\AA}$, 4.6 mm${\times}$150 mm) was used with a gradient elution system of water and methanol. UV wavelength of detector set at 230 nm and 280 nm. This method was validated by linearity, precision test and recovery test. Calibration curves of three standard components were showed good linear regression ($R^2$>0.9973). LOD and LOQ ranged from 0.08 ${\mu}g$/ml to 0.38 ${\mu}g$/ml and 0.25 ${\mu}g$/ml to 1.16 ${\mu}g$/ml, respectively. The relative standard deviations (RSDs) of data of the inter-day and intra-day experiments were less than 0.54% and 0.89%, respectively. The measured results of recovery test were varied from 93.36 to 107.79 with RSD values 0.01~1.45%. The established method was applied for separation of bio-conversion Samultang sample and compared with control sample.

• Journal of Embryo Transfer
• /
• v.11 no.3
• /
• pp.309-316
• /
• 1996

The aim of this study is to elucidate sperm chemotaxis and to set up the optirnal condition for selection of motile and capacitated sperm from hovine frozen-semen. Thus, the effects of semen-washing after thawing, concentrations of progesterone (P4) and bovine serum albumin (BSA), and sperm-washing frequency on sperm selection were examined. For evaluating their effects, number, viability and acrosome reaction of sperm swim-up seperated from semen, which were incubated for 30 minutes at 36$^{\circ}C$ in the M2 solution containing P4 and BSA, were investigated. For frozen-semen just after thawing, sperm recovery and viability were not significantly different between P4-treated and -untreated semen. However, washing frozen-semen decreased the number of sperm and increased the viability of sperm that were recovered from semen treated with P4. Progesterone affected the recovery rate, the viability and the acrosome-reaction rate of sperm recovered from washed frozen-semen. Especially, number of motile and capacitated sperm were highest in semen treated with 50$\mu$g /ml among 0, 20, 50 and 100$\mu$g /ml of P4 concentrations. BSA affected the recovery rate and the viability of sperm recovered from washed frozen-semen that were treated with 50$\mu$g /ml of P4. Especially, the percentage of viable sperm were highest in semen treated with 4mg /ml among 0, 2, 4, and 6mg /ml of BSA concentrations. Repeatedly sperm-washing did not affect the recovery rate and the viability of sperm recovered from washed frozen-semen that were treated with 50$\mu$g /ml of P4 and 4mg /ml of BSA In conclusion, using progesterone and BSA could efficiently make the selection of motile and capacitated sperm from washed frozen-semen.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.11
• /
• pp.1606-1610
• /
• 2002

The dynamics of fermentation were studied with Italian ryegrass ensiled in the laboratory silos. The silos were kept in the room set at 25$^{\circ}C$, and then were opened on 0.5, 1, 2, 3, 5, 7 and 14 days after ensiling, respectively. The samples were taken from three silos at each sampling time for chemical analyses. Mono-and disaccharides composition was determined for glucose, fructose and sucrose by high performance liquid chromatography. The Italian ryegrass silage succeeded to achieve lactate type fermentation; high values of lactic acid (85.83 g/kg) and lactic acid/acetic acid at the end of ensiling (14 day), low values of pH (3.74), acetic acid (5.38 g/kg), ethanol (19.20 g/kg) and $NH_3-N/Total\;N$ (75.84 g/kg), no or only small amounts of butyric acid, valeric acid and propionic acid. The fermentation dynamics showed a fast and large pH decrease caused by a fast and large production of lactic acid during the first 5 days. Mono-and disaccharides composition largely decreased within initial 0.5 day (12 h) of ensiling. Sucrose disappeared rapidly within initial 0.5 day of ensiling, and fructose and glucose contents showed an initial rise during ensiling, and then decreased gradually. These indicated that the enzymes of plant tissue were active within 2 days of ensiling, which caused the initial rise in fructose and glucose from the hydrolysis of sucrose and fructans. After 5 days of ensilage, glucose was consumed completely, suggesting that glucose was the first fermentation substrate. After 2 days of ensiling, sum amounts of lactic acid and remaining mono-and disaccharides proved to be larger than the quantity of mono-and disaccharides in the initial grass. From the facts mentioned above, it was suggested that considerable amounts of lactic acid were produced from some other substrate such as fructans than initial mono-and disaccharides.

• The Journal of Advanced Prosthodontics
• /
• v.4 no.3
• /
• pp.121-126
• /
• 2012

PURPOSE. The aim of the study was to evaluate the effect of 3 silicone primers and 3 surface characterization of acrylic resin surface on bond strength between silicone elastomer and acrylic resin. MATERIALS AND METHODS. 96 Cosmesil silicones bonded to heat-curing acrylic resin were fabricated with the dimension of $75{\times}10{\times}3$ mm. The 3 primers used in this study were G611 platinum primer, A-330 Gold platinum primer, and cyanoacrylates resin. Specimens without primer were used as control. The 3 types of surface characterization done were retentive holes with 1.5 mm in diameter and 0.5 mm deep, retentive beads of 0.6 mm diameter and the third type which was plain without any characterization. The specimens were then checked for bond strength by subjecting them to $180^{\circ}$ peel test on a universal testing machine. The obtained results were then subjected to statistical analysis using 2-way ANOVA and Scheff$\acute{e}$ multiple post hoc procedures. The statistical significance was set at 5% level of significance. RESULTS. The maximum bond strength was seen for samples in which A-330G primer was used followed by G611 primer. The control group showed the minimum bond strength. Surface characterization of retentive holes increased the bond strength considerably as compared to retentive beads and samples without any surface characterization. CONCLUSION. Within the limitations of the study, A-330G primer was more compatible with Cosmesil M511 silicone and has better bonding of Cosmesil to acrylic resin. Retentive holes made on acrylic surface increased the bond strength considerably than those without any surface characterization.

• YAKHAK HOEJI
• /
• v.42 no.5
• /
• pp.473-479
• /
• 1998

Lovastatin (LOVA), a fungal metabolite isolated from cultures of Aspergillus terreus, is a competitive HMG-CoA reductase inhibitor used for the treatment of primary hyper cholesterolemia, and has also been shown to suppress growth in a variety of non-glioma tumor cell lines. A sensitive reversed-phase high-perfonnance liquid chromatographic method with ultraviolet (UV) absorbance detection has been developed to quantitate LOVA in human plasma and urine samples using liquid-liquid extraction procedure. Baseline separation of LOVA and internal standard, simvastatin was achieved on a Novapak $C_{18}$ analytical column with a mobile phase containing 0.025M $NaH_2PO_4$: CAN (35:65, v/v%), adjusted pH to 4.5. The flow rate was set at 1.5ml/min, and the column effluent was monitored by a UV detection at 238nm. The limit of quantification was determined to be 0.5${\mu}$g/ml while extraction efficiency of LOVA ranged from 73.4-82.9% at LOVA concentrations of 0.5 to 10${\mu}$g/ml. Good linearity with correlation coefficients greater than 0.999 was obtained in the range of LOVA concentrations from 0.5 to 10${\mu}$g/ml. The accuracy and the precision were proven excellent with relative standard deviation (RSD, %) and relative error (RE, %) of less than 4.2 and 4.0, respectively. Intraday precision, evaluated at five LOVA concentrations (0.5, 1, 2, 5, 10${\mu}$g/ml) and expressed as RSD ranged from 0-1.82% while the interday precision at the same concentrations ranged from 0.7-10.5%. The analytical method described was then successfully employed for the determination of LOVA concentrations in plasma samples obtained during a phase II clinical trial using high doses of LOVA (30-40mg/kg/day). This method could be further utilized for the ongoing pharmacolkinetic studies and therapeutic drug monitoring of the high-dose LOVA therapy in adenocarcinoma patients.