• 대한전자공학회논문지SD
• /
• 제42권8호
• /
• pp.15-26
• /
• 2005

본 논문에서는 효율적인 $GF(2^m)$ 멀티 세그먼트 곱셈 연산 구조를 제안하고 제안된 구조의 타원곡선 암호 프로세서 설계 응용을 연구한다. 제안된 멀티 세그먼트 곱셈 연산 구조는 유한체 크기 m에 비하여 아주 작은 워드 조합 곱셈기를 이용하여 부분곱을 계산하고 거의 모든 내부 버스는 워드 크기이며 m 비트 멀티플렉서와 m 비트 레지스터를 하나만 사용한다. 따라서 조합 곱셈기의 워드 크기 w를 줄이고 세그먼트 수 k를 크게 하여 전체 데이터패스 자원 사용량이 최소화할 수 있다. 제안된 곱셈기는 디지트 시리얼 곱셈기로 구현된 ECC 프로세서와 비교할 때 이론적으로 자원 효율성이 우수하다 암호 프로세서의 자원 사용량은 구현에 필요한 기본 하드웨어 요소 수뿐만 아니라 구성 요소들의 배치와 연결 상태에도 의존한다. 제안된 프로세서의 실질적인 자원사용량을 디지트 시리얼 곱셈기 기반 암호 프로세서와 비교하기 위하여 두 종류의 프로세서를 FPGA 상에 구현하였다. 실험 결과로 제안된 멀티 세그먼트 곱셈기 기반 EU 프로세서는 유사한 성능을 가지는 디지트 시리얼 곱셈기 기반 EU 프로세서보다 자원 사용면에서 2배 정도 우수함을 보였다.

• 대한족부족관절학회지
• /
• 제8권2호
• /
• pp.191-194
• /
• 2004

Purpose: Anatomic configuration of the ankle joint is useful information during various ankle procedures. This study was prospectively designed to investigate the sagittal inclination pattern of the ankle joint. Materials and Methods: Lateral standing ankle radiographs from one-hundred people (age: $17{\sim}68$, M:F=45:55) and magnetic resonance (MR) sagittal ankle images from twenty-four people (age: $16{\sim}65$, M:F=14:10) were studied. Post-traumatic, arthritic, or grossly deformed ankles at any reason were excluded. The posterior inclination angle (PIA) of the distal tibia was measured and compared between the lateral and the medial segment. Results: On plain radiographic data, the average PIA of the distal tibia was $6.14^{\circ}{\pm}3.56^{\circ}$ (range $0^{\circ}$ to $14^{\circ}$) in the lateral segment and $13.16^{\circ}{\pm}3.05^{\circ}$ (range $6^{\circ}$ to $22^{\circ}$) in the medial segment. On MR imaging data, the average PIA of the distal tibia was $5.08^{\circ}{\pm}4.26^{\circ}$ (range $1^{\circ}$ to $10^{\circ})$ in the lateral segment and $10.16^{\circ}{\pm}4.87^{\circ}$(range $5^{\circ}$ to $17^{\circ}$) in the medial segment. The PIA between two segments was significantly different. Conclusion: The sagittal configuration of the medial area ankle joint and the lateral area ankle joint has difference in the degree of posterior inclination and shape of curvature.

• Journal of Cerebrovascular and Endovascular Neurosurgery
• /
• 제26권1호
• /
• pp.37-45
• /
• 2024

Objective: To review the characteristics of distal middle cerebral artery (MCA) aneurysm treated by microsurgery, the detailed surgical options, and the clinical result. Methods: We retrospectively reviewed cerebral aneurysm in the M2 and M3 segments of the MCA surgically treated between January 2015 and December 2022. The demographic data, aneurysm-related findings, type of surgical approach, surgical technique, and clinical outcomes of the enrolled patients were analyzed. Results: Sixteen distal MCA aneurysms were treated with microneurosurgery (incidence, 1.0%; female, 12; mean age, 58.1 years; ruptured, three). Twelve aneurysms were in the M2 segment (insular segment), two aneurysms at the M2-M3 junction, and two aneurysms in the M3 segment (opercular segment). Twelve aneurysms were saccular (average size, 4.9 mm; multiplicity, 50%; average aneurysms, 3.0; partially thrombosed, 1; sidewall aneurysm, 2). Three aneurysms were fusiform, of which two were ruptured. Of the ruptured aneurysms, one was a ruptured dissecting aneurysm. The trans-sylvian and trans-sulcal approaches were used in fourteen and two patients, respectively. Neck clipping, wrap clipping, and surgical trapping were performed in twelve, one, and one patient, respectively. Proximal occlusion was performed in one patient. Bypass technique was required in two patients (neck clipping and proximal occlusion). The modified Rankin Score was 6 in the two patients with ruptured aneurysms. The remaining patients did not show further neurological deterioration after microneurosurgery. Conclusions: Distal MCA aneurysms had a high incidence of being diagnosed with multiple other aneurysms and were relatively non-saccular.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제29권1호
• /
• pp.26-34
• /
• 2003

Intraoral Vertical Ramus Osteotomy,along with Sagittal Split Ramus Osteotomy,is an popular surgical technique performed on mandibular prognathism. However Intraoral Vertical Ramus Osteotomy has been suspected for an initial mobilization at the healing phase of segment because it does not employ the rigid fixation between segments. To execute a study on the healing phase of segment after Intraoral Vertical Ramus Osteotomy on the horizontal plane, 102 patients (204 parts) who were diagnosed mandibular prognathism and took Intraoral Vertical Ramus Osteotomy at the Yonsei University dental hospital were observed during the period of before operation, immediately postoperation, 1 month, 3 months, 6 months, and 12 months. The change in the width of segment and horizontal angle of proximal segment and condylar head on the Submentovertex Cephalogram taken from those patients represented following results. 1. The width of proximal and distal segment decreased with the lapse of time. It decreased into 84.5% between immediate postoperative and 6M and even continued to decrease till 12M. 2. The horizontal angle of the proximal segment did medial rotation according as the lapse of time and rigorously continued till 3M. The rotation angle of condylar head indicated its tendency of recurrence to the original position but the entire recurrence was not allowed. The bigger an initial angle was, the higher was the tendency of recurrence after the operation while the rotation angle remained still bigger. 3. After grouping into group 1, group 2,and group 3 based on the extent of the variation of rotation angle of condylar head at immediate postoperative, the variation of rotation angle was measures in each group. The result presented that the initial rotation angle of condylar head had correlation with that of proximal segment but had no relation with the extent of setback of the mandible. However a quantitative analysis alone is not a sufficient method for analyzing the healing phase of segment on the horizontal plane.Therefore a multilateral analysis using 3 dimensional data such as CT is recommendable for the future study.

• Journal of Plant Biology
• /
• 제33권4호
• /
• pp.315-320
• /
• 1990

We investigated the interaction of auxin and Ca2+ on coleoptile segment elongation in seedlings of Zea mays L. Seedlings imbibed and raised either in the presence of 10 mM CaCl2 (HC), or in the absence of Ca2+ (LC) were used. Exposure to 10-5M auxin of coleoptiles from either HC or LC seedlings resulted in strong promotion of elongation. However, longer latent period (90 min) of the auxin effect was observed in HC than in LC seedlings (20 min). The length of latent period observed in HC coleoptiles was proportional to the concentration of CaCl2. The latent period of auxin effect observed in HC seedlings was abolished by pretreatment of the coleoptiles with TMB-8 which inhibits IP3-induced Ca2+ release from the tonoplasts. In segments of LC seedlings, the promotive effect of IAA (10-5M) was abolished by treatment with 5 mM calcium but was reversible upon treatment of the segments with 5 mM EGTA. These results suggest that the effect of auxin on coleoptile elongation is closely related to intracellular Ca2+ level.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.186-189
• /
• 2003

Precast Segmental method was developed in germany 1950s. This method has been adoptted in long span girder mainly owing to easy construction effect. But, so far, The limit exists that this method is constructed in a portion of span and hard conveyance and foundation. This study was performed to analysis behavior difference of two rectanglar section girder, spliced girder that was jointed 5-sliced 0.8m segment and monolithic girder that was produced in one body 4m span

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.217-218
• /
• 2010

• 한국분말재료학회지
• /
• 제15권5호
• /
• pp.378-385
• /
• 2008

This article presents the successful consolidation of the mixed Co and Diamond powders for a drilling segment by the combined application of magnetic pulsed compaction (MPC) and subsequent sintering, and their properties were analyzed. Homogeneous hardness (Hv 220) and density (97%) of sintered bulks fabricated by MPC were obtained by the new technique, where higher pressure has been employed for short period of time than that of general process. A fine microstructure and homogeneous hardness in the consolidated bulk were observed without cracks. Relatively higher drilling speed of 9.61 cm/min and life time of 6.55 m were found to the MPCed specimens, whereas the value of the specimens fabricated by general process was 11.71 cm/min and 7.96 m, respectively. A substantial improvement of mechanical properties of segment was achieved through this study.

• Journal of Information Processing Systems
• /
• 제10권4호
• /
• pp.543-554
• /
• 2014

It is difficult for mobile learners to maintain a high level of concentration when learning content for more than an hour while they are on the move. Despite the attention span issue, many m-learning systems still provide their mobile learners with the same content once used in e-learning systems. This has called for an investigation to identify the suitable characteristics of the m-learning environment. With this in mind, we have conducted a survey in hopes of determining the requirements for developing more suitable m-learning content. Based on the results of the survey, we have developed a content model comprised of two types: a segment type and a supplement type. In addition, we have implemented a prototype system of the content model for Apple iPhones and Android smartphones in order to investigate a feasibility study of the model application.

• 대한바이러스학회지
• /
• 제30권3호
• /
• pp.203-210
• /
• 2000

Hantaviruses are etiologic agents of hemorrhagic fever with renal syndrome (HFRS) and hantavirus pulmonary syndrome (HPS) in the world. Various hantaviruses were isolated from HFRS patients and several different rodent species in the world. Four hantavirus isolates from Indonesia and three isolates from Thailand among 89 Bandicotas captured in Yogyakarta, east region of Sumatra island, Indonesia and at Chiang Mai in Thailand during 1996 were made through several passages in Vero E6 cells. Viral genome M segment from two Indonesian isolates and three Thailand isolates were amplified using hantavirus generic primers of the M segment and cloned into pCRII vector. The genetic differences were analyzed by comparison of partial sequence of the M segment and antigenic differences were made by IFA. Nucleotide sequence homology of two isolates BC 8, BC 34 from Indonesia and two isolates thai 1322, thai 1330 to Seoul virus was 99% and 96%, respectively, but Thai 1164 was 80%Thai 1164 strain has shown 95% homology to Thai 749 virus. In conclusion it is indicated that two different serotype hantaviruses, Seoul and Thailand, are cocirculating among Bandicota in Thailand, in contrast Seoul serotype virus is circulating in Indonesia.