• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.5
• /
• pp.426-429
• /
• 2017

For the W-band remote sensing radiometer, direct detection type radiometer receiver is designed. The receiver should be low noise and high gain of 60 dB unlike communication and radar receiver. The W-band radiometer consist of 4-stage low noise, high gain amplifier, band pass filter and square law detector. The developed direct detection receiver show 4 GHz bandwidth, 56 dB gain, and 4,500 mV/mW voltage sensitivity at integrator output port for -20 dBm input power at 94 GHz.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.2
• /
• pp.5-15
• /
• 2017

PHC-W retaining wall method is one of the economical retaining wall methods. PHC-W pile used in PHC-W retaining wall method has special shape with flat surfaces so that the PHW-C retaining wall, with overlapped piles, shows outstanding vertical control and impermeability. In order to evaluate two types of retaining walls, numerical analysis were performed. The selection of cases depended on N values of the ground and ground properties, and two types of PHC-W retaining walls (defined as type A and B) were constructed. For a case that consists of inorganic clay and sand with less than 30 of N value, the maximum excavation depths for type A and B were respectively 10.5 m and 11.0 m. At the other case of which N value is above 30, the depths were 17.0 m and 19.5 m. From the results, it was found that maximum excavation depth, horizontal displacement, and safety factor for flexural strength of the wall were influenced by ground properties.

• Korean Journal of Human Ecology
• /
• v.15 no.5
• /
• pp.811-821
• /
• 2006

The purpose of this report was to study visual effect and functional effect of waist line location of slacks for females in 20'. 1. Differences of visual effect of slacks waist line change to be expressed that mature, sexual and casual slacks waist line were W4 or W5, looks like long leg and mature and formal slacks waist line was W1, slim lower part of the body and flat slacks waist line was W4. 2. Analysis result of functional effect difference with the location variation of slacks waist line were as follows. In all motions(M1, M2, M3, M4) W2 that downed 7cm-6cm-6cm from natural waist line was valued as the most comfortable, W1 and W5 were valued as discomfortable, where waist line was too high or too low.

• Journal of Yeungnam Medical Science
• /
• v.6 no.1
• /
• pp.151-163
• /
• 1989

Nerve conduction studies help delineate the extent and distribution of the neural lesion. The nerve conduction was studied on upper(median, ulnar and radial nerves) and lower(personal, posterior tibial and sural nerves) extremities in 83 healthy subjects 23 to 66 years of age. and normal values were established(Table 1). The mean motor terminal latency (TL) were : median. 3.6(${\pm}0.6$)milliseconds ; ulnar. 2.9(${\pm}0.5$) milliseconds ; radial nerve. 2.3(${\pm}0.4$) milliseconds. Mean motor nerve conduction velocity(MNCV) along distal and proximal segments: median. 61.2(${\pm}9.1$) (W-E) and 57.8(${\pm}13.2$) (E-Ax) meters per second ; ulnar. 63.7(${\pm}9.1$) (W-E) and 50.(${\pm}10.0$) meters per second. Mean sensory nerve conduction velocity(SNCV) : median. 34.7(${\pm}6.7$) (F-W), 63.7(${\pm}7.1$) (W-E) and 62.8(${\pm}12.3$) (E-Ax)meters per second ; ulnar. 38.0(${\pm}6.7$)(F-W), 63.4(${\pm}7.5$) (W-E) and 57.0(${\pm}10.1$) (E-Ax)meters per second ; radial, 45.3(${\pm}6.8$) (F-W) and 64.2(${\pm}11.0$) (W-E) meters per second ; sural nerve, 43.4(${\pm}6.1$) meters per second. The amplitudes of action potential and H-reflex were also standardized. Mean H latency was 28.4(${\pm}3.2$) milliseconds. And. the fundamental principles, several factors altering the rate of nerve conduction and clinical application of nerve stimulation techniques were reviewed.

• 한국정보통신설비학회:학술대회논문집
• /
• 2006.08a
• /
• pp.228-231
• /
• 2006

In this paper, we present interfaces for IPMP services on MPEG Multimedia Middleware (M3W). For supporting normative IPMP framework based on MPEG-2/4 IPMPX, M3W IPMP tool interfaces are defined and far supporting MPEG-21 IPMP, REL and other related protective functions, M3W trust management interfaces are. Through the proposed interfaces, IPMP can be easily implemented under various environments and experimental results show some implementation examples.

• Journal of Powder Materials
• /
• v.16 no.4
• /
• pp.268-274
• /
• 2009

For the purpose of obtaining basic information on the development of lead-free materials, a high density composites (a) W-Cu, (b) W-Sn (c)W-Cu-Sn and (d) W-Cu-Ni were fabricated by the P/M method. The particle size of used metal powders were under 325 mesh, inner size of compaction mould was $\phi8$ mm, and compaction pressure was 400 MPa. A High density composite samples were sintered at a temperature between $140^{\circ}C$ and $1050^{\circ}C$ for 1 hour under Ar atmosphere. The microstructure, phase transformation and physical properties of the sintered samples were investigated. As the results, the highest relative density of 95.86% (10.87 g/$cm^3$) was obtained particularly in the sintered W-Cu-Sn ternary system sample sintered at 450 for 1hr. And, Rockwell hardness (HRB) of 70.0 was obtained in this system.

• Journal of the Korean Chemical Society
• /
• v.61 no.2
• /
• pp.57-64
• /
• 2017

Monoclinic $VO_2(M)$ nanoparticles codoped with 1.5 at. % W and 2.9 at. % Mg were synthesized by the hydrothermal treatment and post-thermal transformation method of $V_2O_5-H_2C_2O_4-H_2O$ with $Na_2WO_4$ and $Mg(NO_3)_2$. The composite thin film of the W/Mg-codoped $VO_2(M)$ with a commercial acrylic block copolymer was also prepared on PET substrate by wet-coating method. The reversible phase transition characteristics of the codoped $VO_2(M)$ nanoparticles and the composite film were investigated from DSC, resistivity and Vis-NIR transmittance measurements compared with the undoped and Wdoped $VO_2(M)$ samples. Mg-codoping into W-doped $VO_2(M)$ nanoparticles synergistically enhanced the transition characteristics by increasing the sharpness of transition while the transition temperature ($T_c$) lowered by W-doping was maintained. The codoped composite film showed the prominently enhanced NIR switching efficiency compared to only W-doped $VO_2(M)$ film with a lowered $T_c$.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.11
• /
• pp.776-781
• /
• 2007

Optimized capacity of equipments are essential for energy saving and low cost construction and operation. So we must use proper design data for HVAC system design. We investigated for architectural data, equipment capacity, cooling and heating load design criteria of 52 office buildings. Following research results were obtained by carrying out each task. Office building effective area rate is 63%. The average building cooling load of South Korea is $140W/m^2$ and average heating loads in Seoul and Pusan area are $120{\sim}130W/m^2$ and $70{\sim}80W/m^2$. We also analysised HVAC design criteria. Person ratio in effective building area is $0.2person/m^2$, sensitive and latent heat loads of a person are 60W and 65W, light and equipment loads of office buildings are $25W/m^2$ and $20W/m^2$.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1998.11a
• /
• pp.252-256
• /
• 1998

본 논문은 새로운 서비스의 하나인 WLL 시스템의 도입에 따른 기존 고정서비스인 M/W 시스템에 미치는 간섭영향을 분석한 것이다. 이를 위해 M/W국에 미치는 WLL 시스템의 순방향 및 역방향 링크상에서의 간섭전력을 계산하여 그 평가를 행하였다. 그 결과로서 순방향링크에 의한 간섭영향은 기지국의 송신출력에 비례하여 증가하지만 셀반경에는 관계가 없다. 반면, 역방향링크에 의한 간섭영향은 가입자의 송신출력에 비례하고, 셀반경이 작아짐에 따라 간섭영향이 커진다. 비록 본 연구는 M/W 시스템에 미치는 WLL 시스템의 간섭영향 분석에 국한되고 있지만, 향후 이와 반대인 WLL 시스템에 미치는 M/W국의 간섭영향을 분석하기 위한 연구로 확장 가능하다.

• Korean Journal of Optics and Photonics
• /
• v.15 no.5
• /
• pp.455-460
• /
• 2004

We have developed a mode-locked ultra-short pulse C $r^{4+}$:YAG laser, as well as a continuous wave C $r^{4+}$:YAG laser. The laser was pumped by a Nd:YAG laser and its characteristics were investigated. In continuous wave mode, we obtained as much as 600 mW at 1.436 ${\mu}{\textrm}{m}$ with pumping power of 6 W, by using an output coupler with a reflectivity of 98%. The power slope efficiency was 10%, when the gain medium was cooled to 19$^{\circ}C$. The tuning range was varied from 1.39 ${\mu}{\textrm}{m}$ to 1.55 ${\mu}{\textrm}{m}$ and the maximum power was 400 mW at 1.492 ${\mu}{\textrm}{m}$ with a 3-plate birefringent filter. The C $r^{4+}$:YAG laser was mode-locked by a Kerr lens mode locking method. Mode locking at 1.436 ${\mu}{\textrm}{m}$was initiated by slightly rocking a mirror mount. But the pulses were very unstable because of the strong water absorption at this region. So we shifted the lasing wavelength to 1.492 ${\mu}{\textrm}{m}$ by using a 3-plate birefringent filter. Then we obtained stable state mode-locking with the maximum average power of 280 mW for a pumping power of 6 W. The pulse width of 43 fs was measured using an autocorrelator and the repetition rate was 104.5 MHz.