• Elastomers and Composites
• /
• v.51 no.3
• /
• pp.206-211
• /
• 2016

Experimental error sources for thermogravimetric analysis (TGA) of poly(ethylene-co-vinyl acetate) (EVA) were investigated and sample preparation method to reduce the experimental error was suggested. Maximum dissociation temperatures of EVA for the first and second dissociation reactions ($T_{m1}$ and $T_{m2}$, respectively) were measured. By decreasing the weight of raw EVA, the $T_{m1}$ increased but the the $T_{m2}$ decreased. When weight of the raw EVA was over 10 mg, the TGA curve showed abnormal behaviors. The abnormal TG behaviors were explained by gathering and instantaneous evaporation of acetic acid formed by deacetylation of the VA unit. When TGA analysis of EVA was performed using untreated (raw) EVA, the experimental errors were about 1%. In order to eliminate the abnormal TG behaviors and to reduce the experimental errors, EVA film made by solvent casting was used. For the treated EVA (EVA film), the abnormal TG behaviors did not appear, the $T_{m1}$ decreased by about $2^{\circ}C$ but the $T_{m2}$ increased by about $6^{\circ}C$, and the experimental errors were reduced by 0.5%.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.13 no.5
• /
• pp.179-187
• /
• 2003

Recently efficient implementation of finite field operation has received a lot of attention. Among the GF($2^m$) arithmetic operations, multiplication process is the most basic and a critical operation that determines speed-up hardware. We propose a hardware architecture using Mastrovito method to reduce processing time. Existing Mastrovito multipliers using the special generating trinomial p($\chi$)=$x^m$+$x^n$+1 require $m^2$-1 XOR gates and $m^2$ AND gates. The proposed multiplier needs $m^2$ AND gates and $m^2$＋($n^2$-3n)/2 XOR gates that depend on the intermediate term xn. Time complexity of existing multipliers is $T_A$+( (m-2)/(m-n) +1+ log$_2$(m) ) $T_X$ and that of proposed method is $T_X$＋(1＋ log$_2$(m-1)＋ n/2 ) )$T_X$. The proposed architecture is efficient for the extension degree m suggested as standards: SEC2, ANSI X9.63. In average, XOR space complexity is increased to 1.18% but time complexity is reduced 9.036%.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.1522-1529
• /
• 2009

When a shaft is excavated in Korea, the mechanized method such as RBM(Raise Boring Machine) or RC(Raise Climber) is used independently of depth. But usually, the mechanized method is useful for the deep depth. On the contrary, when the depth of shaft is short, the cost of excavation increase. So in the case of shaft constructon less than 100m, we need to consider more suitable method of shaft construction such as Stage-cut which is one of blasting methods. Stage-Cut is widely used in the field of shaft construction in Japan as a tool of rock excavation. The main purpose of this study is to provide technical guidance for design and construction of shafts in rock, using Stage-cut method which is suitable for 20m~80m depth shaft. In this study, Blasting tests was performed in field, according to rock classification. Finally, the stage-cut method which is suitable for the geology of Korea was developed.

• The Pure and Applied Mathematics
• /
• v.23 no.2
• /
• pp.163-179
• /
• 2016

Let $M_1f(x,y):=\frac{3}{4}f(x+y)-\frac{1}{4}f(-x-y)+\frac{1}{4}(x-y)+\frac{1}{4}f(y-x)-f(x)-f(y)$, $M_2f(x,y):=2f(\frac{x+y}{2})+f(\frac{x-y}{2})+f(\frac{y-x}{2})-f(x)-f(y)$ Using the direct method, we prove the Hyers-Ulam stability of the additive-quadratic ρ-functional inequalities (0.1) $N(M_1f(x,y)-{\rho}M_2f(x,y),t){\geq}\frac{t}{t+{\varphi}(x,y)}$ and (0.2) $N(M_2f(x,y)-{\rho}M_1f(x,y),t){\geq}\frac{t}{t+{\varphi}(x,y)}$ in fuzzy Banach spaces, where ρ is a fixed real number with ρ ≠ 1.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.9
• /
• pp.76-85
• /
• 2007

An optical rotary encoder is easy to implement for automatic control applications. In particular, the output of the encoder has a digital form pulse, which is also easy to be connected to a popular digital controller. By using the encoder, there are various angular velocity detecting methods, M-, T-, and M/T-method. Each of them has a property of its own. They have common limitation that the angular velocity detection period is strongly subject to the destination velocity magnitude in case of ultimate low range. They have ultimate long detection period or cannot even detect angular velocity at near zero velocity. This paper proposes a dual encoder system with two encoders of normal resolution. The dual encoder system is able to keep detection period moderately at near zero velocity and even detects zero velocity within nominal period. It is useful for detecting velocity in case of changing rotational direction at which there occurs zero velocity. In this paper, various experimental results are shown for the dual encoder system validity.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.6
• /
• pp.1188-1193
• /
• 2004

So far, there have been grossly 3 types of studies on GF(2m) multiplier architecture, such as serial multiplication, array multiplication, and hybrid multiplication. Serial multiplication method was first suggested by Mastrovito (1), to be known as the basic CF(2m) multiplication architecture, and this method was adopted in the array multiplier (2), consuming m times as much resource in parallel to extract m times of speed. In 1999, Paar studied further to get the benefit of both architecture, presenting the hybrid multiplication architecture (3). However, the hybrid architecture has defect that only complex ordo. of finite field should be used. In this paper, we propose a novel approach on developing serial multiplier architecture based on Mastrovito's, by modifying the numerical formula of the polynomial-basis serial multiplication. The proposed multiplier architecture was described and implemented in HDL so that the novel architecture was simulated and verified in the level of hardware as well as software. The implemented GF(2m) multiplier shows t times as fast as the traditional one, if we modularized the numerical expression by t number of parts.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.10a
• /
• pp.133-133
• /
• 2018

The aim of this study was to evaluate the effect of charcoal on germination and early growth of barley sprouts. Five treatments were employed based on different amount and treatment method along with control. Barley seeds were soaked in water for 8 hours. Two types of topping treatment were applied such as, charcoal: 100 g (designated as T1) and charcoal: 200 g (T2). Three kinds of mixing treatment were as follows: barley seeds were mixed with 100g of charcoal (designated as M1), with 200g of charcoal (M2), and with 300g of charcoal(M3). The control did not have any charcoal. In our finding, germination rates were observed 53.3% (control), 26.3%(T1), 36.3%(T2), 67.3%(M1), 81.7%(M2), and 79.7%(M3) at three days after inoculation (DAI). Length of radicle was found at 0.90 cm (control), 0.88 cm (T1), 0.99 cm (T2), 1.03cm (M1), 1.66 cm (M2), and 0.70 cm (M3) in 3 DAI. In addition, sprout length was found 4.5 cm (control), 10.4 cm (T1), 11.9 cm (T2), 5.7 cm (M1), 6.3 cm (M2), and 2.1 cm (M3) in 14 DAI. Fresh weight of sprouts were 0.78g (control), 1.03g (T1), 1.07g (T2), 0.96g (M1), 1.07g (M2), and 0.95g (M3). Among the treatment, topping of seeds on 200g of charcoal (T2) showed longest sprout length and fresh weight. Mixing treatments showed higher germination rates and sprout fresh weight. The results may be attributed to difference in micro-climate conditions (mostly temperature and humidity) in the growth boxes in different treatments.

• The Korean Journal of Nuclear Medicine
• /
• v.3 no.1
• /
• pp.19-32
• /
• 1969

Radioisotope renography was carried out in 564 cases consisting of 150 normal controls, 140 hypertensives, 102 hypertensive nephropathys, 62 chronic renal diseases, non-functioning kidneys. It was aimed to study which parameter of the renogram is most applicable to any definite disease of the kidney. The analytical methods adopted were; Tobe, Spencer, Krueger, Matchida and Takeuchi. In the non-functioning kidney groups, the hemograms and serum nitrogen series were also studied to evaluate the relationships between the renograms and renal anemia. The parameters were; time of maximum amplitude (Tmax), half-time of maximum amplitude ($T\frac{1}{2}$), Kac value calculated from these two parameters in Tobe's method, slopes of Band C phase, B/A and B/C values in Spencer's method, total concentration (T.C.), minute concentration (M.C.) and minute excretion (M.E.) in Krueger's method, Matchida's K value and Takeuchi's renal function Index (R.F.I.). Following were the results: 1. In general, marked differences in the patterns of the renogram were observed between the normal controls and nephropathys. In Tobe's method, each parameter showed statistically significant delay or decrease in patients with hypertensive nephropathys and chronic renal diseases. In Spencer's method, slopes of B and C phase and B/C, also showed the statistically significant decrease in patients with hypertension, hypertensive nephropathys and chronic renal diseases. In Krueger's method, M.C. and ME showed the statistically significant differences between the control and patients with hypertension, hypertensive nephropathys and chronic renal diseases, In Matchida's method, K value showed the statistically significant differences between the control and patients with hypertensive nephropathys and chronic renal diseases. 2. It appeared, therefore, that Tobe's $T\frac{1}{2}$, Kac value, Spencer's slopes of Band C phase, B/A, B/C values, Krueger's T.C., M.C., and M.E. values, Matchida's K value are useful for the differentiation of various renal diseases, however, qualitative analysis of the renogram with one or two parameters is not accurate. 3. In bilateral non-functioning kidney groups, a positive correlation between anemia and nitrogen retention was observed, although the quantitative assessment of the degree of non-functioning was impossible.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.9 no.2
• /
• pp.70-76
• /
• 1984

In this paper, a functional m-redundant system, which is m-fault tolerant, is defined based on the graph-theory. This system is designed to be t(t$\geq$m) fault-diagnosable by comparing its unit's outcomes without additive test functions, so, the system down for diagnosis is not needed. The diagnostic model for this system is presented. It is to avail the redundancy of the system effectively. It is shown that this model can be converted into Preparata's model. Thus, the diagnostic characteristics of a functional m-redundant system is analyzed by the method originated by Preparata et al.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.1
• /
• pp.24-33
• /
• 2004

Recently, ship acoustics takes more important role in acoustic stealth and classification of underwater targets. In this paper, a theoretical concept is proposed for M＆S-based test and evaluation of ship acoustics. The concept is based on two different approaches: on Top-Down method which emphasizes the survivability of the ship and on Bottom-Up method which considers acoustic characteristics of the ship-equipments. In order to improve the effectiveness of M＆S-based T＆E for ship acoustics, it is recommended in this paper to compromise the two approaches as adequate.