• Journal of Biosystems Engineering
• /
• 제37권1호
• /
• pp.58-64
• /
• 2012

Purpose: The objective of this study was to investigate the feasibility of anaerobic digestion of Chinese cabbage waste juice (CCWJ) and swine manure(SM). Methods: The anaerobic digestion test was conducted under batch and continuous conditions at mesophilic temperature ($36-38^{\circ}C$). The batch test was divided into Experiment I and II. In the Experiment I, biogas potential and production rate of CCWJ was evaluated. In Experiment II the effect of F/M ratio (2.0, 3.2, 4.9) at mixture ratio of 25:75(CCWJ: SM, % vol. basis) on biogas yield was studied. Results: CCWJ produced biogas and methane yield of 929 and 700 mL/g VS added respectively. The biogas yield from the mixture of CCWJ and SM was almost same at F/M ratio of 2.0 and 3.2 but dropped by 14% when F/M ratio increased from 3.2 to 4.9. In continuous test the mixture of CCWJ and SM (25:75, % vol. basis) produced biogas yield of 352 mL/g VS added which is around 11% higher compared to biogas yield from SM alone. Addition to biogas yield digester performance was also improved with co-digestion of CCWJ with SM. Conclusions: The results showed that the anaerobic digestion of CCWJ with SM could be promising for improving both the biogas yield and digester performance at mesophilic temperature.

• 환경위생공학
• /
• 제20권4호통권58호
• /
• pp.21-30
• /
• 2005

This research was performed to measure the concentration distribution of bioaerosol in apartment houses in the region of Chungnam (Chunan, Asan) for 1 month, December, 2004. The results are as follows. 1. By using SDA method, the average concentration of total microbe and fungus in the air inside and outside apartment house below 4 years are $69,42cfu/m^3\;and\;15.66cfu/m^3$, while apartment house over 4 years, $214.58cfu/m^3\;and\;216.43cfu/m^3$, respectively With gravitational sedimentation method, the average concentration of total microbe and fungus of apartmenthouse below 4 years are $100.63cfu/m^3\;and\;22.83cfu/m^3$, while apartment house over 4 years, $216.43cfu/m^3\;and\;70.000cfu/m^3$, respectively. 2. The I/O ratio of floating germ of apartment house below 4 years and over 4 years are 2.87 and 5.12 for total microbe, and 3.32 and 8.28 for fungus, respectively. The I/O ratio of falling germ of apartment house below 4 years and over 4 years are 1.55 and 2.81 for total microbe, and 2.85 and 4.08 for fungus, respectively. The apartment house below 4 years shows a low I/O ratio in all cases. 3. The difference in concentration of microbe between inside master bedroom and living room of apartment house below 4 years is $13.183cfu/m^3$, total microbe, and $4.787cfu/m^3$, fungus, while, apartment house over 4 years, $43.531cfu/m^3$, total microbe, and $21.932cfu/m^3$, fungus. The measured differences are statistically significant. 4. Air sampler was used to verify the difference in concentration of microbe with the age of apartment house. The difference in concentration of total microbe and fungus for outside apartment house below 4 years and over 4 years are $49.82cfu/m^3$ and $3.78cfu/m^3$, respectively. The difference of inside living room shows $160.23cfu/m^3$ for total microbe and $28.01cfu/m^3$ for fungus, and the difference of inside master bedroom shows $225.43cfu/m^3$ for total microbe and $56.73cfu/m^3$ for fungus. The differences are statistically significant. The difference in concentration of outside apartment house below 4 years and years 4 years are $34.66cfu/m^3$, total microbe, and $15.66cfu/m^3$, fungus, while inside apartment house below 4 years and over 4 years, $196.93cfu/m^3,\;and\;78.67cfu/m^3$, respectively. The measured differences are statistically significant.

• Journal of Biosystems Engineering
• /
• 제27권2호
• /
• pp.89-96
• /
• 2002

The trend of consumption of vegetable soybeans is increasing because they are recognized as the clean vegetable. The works requiring the most intensive labor are threshing and seperation ones, and they form about 80% of total labour for vegetable soybeans production. It is necessary to develop the vegetable soybeans-thresher for the sake of cost down of vegetable soybeans production. The purpose of this study is to acquire the basic informations to design of the vegetable soybeans-thresher. We make the experimental system which control the speed of threshing cylinder and the teeth gap and investigate the detachment forces. The result are as follows ; The ratio of un-threshed soybeans-pod to stem after threshing work is decreasing as the threshing cylinder speed increases: 0.0% and 2.8% at 55m/s and 18m/s of threshing cylinder speed respectively. Also the ratio of un-threshed soybeans-pod to stem is shown as 2.0% below in the condition of 64~160mm of teeth gap and over 28m/s of threshing cylinder speed. The damaged pod ratio of detached soybeans after threshing work is decreasing as the threshing cylinder speed increases: 4.8% and 1.3% at 55m/s and 18m/s of threshing cylinder speed respectively. The minimum damaged pod ratio of detached soybeans are shown as 1.0%, 1.5% and 1.9% at 18m/s, 28m/s and 37m/s of threshing cylinder speed respectively. The average detachment forces of pods are shown as 1.5kg$_{f}$ for 3 grains, 1.2kg$_{f}$ for 2 grains and 0.8kg$_{f}$ for 1 grain respectively. The maximum detachment force of pod is shown as 2.7kg$_{f}$ for 3 grains. grains.

• Nuclear Engineering and Technology
• /
• 제50권7호
• /
• pp.1120-1130
• /
• 2018

An analysis of a pyroprocessing safeguards methodology employing the Pu-to-$^{244}Cm$ ratio is presented. The analysis includes characterization of representative used nuclear fuel assemblies with respect to computed nuclide composition. The nuclide composition data computationally generated is appropriately reformatted to correspond with the material conditions after each step in the head-end stage of pyroprocessing. Uncertainty in the Pu-to-$^{244}Cm$ ratio is evaluated using the Geary-Hinkley transformation method. This is because the Pu-to-$^{244}Cm$ ratio is a Cauchy distribution since it is the ratio of two normally distributed random variables. The calculated uncertainty of the Pu-to-$^{244}Cm$ ratio is propagated through the mass flow stream in the pyroprocessing steps. Finally, the probability of Type-I error for the plutonium Material Unaccounted For (MUF) is evaluated by the hypothesis testing method as a function of the sizes of powder particles and granules, which are dominant parameters to determine the sample size. The results show the probability of Type-I error is occasionally greater than 5%. However, increasing granule sample sizes could surmount the weakness of material accounting because of the non-uniformity of nuclide composition.

• The Korean Journal of Physiology and Pharmacology
• /
• 제9권1호
• /
• pp.29-35
• /
• 2005

To prove the buffering contribution of mitochondria to the increase of intracellular $Ca^{2+}$ level ($[Ca^{2+}]_i$) via background nonselective cation channel (background NSCC), we examined whether inhibition of mitochondria by protonophore carbonylcyanide m-chlorophenylhydrazone (CCCP) affects endothelial $Ca^{2+}$ entry and $Ca^{2+}$ buffering in freshly isolated rabbit aortic endothelial cells (RAECs). The ratio of fluorescence by fura-2 AM ($R_{340/380}$) was measured in RAECs. Biological state was checked by application of acetylcholine (ACh) and ACh ($10{\mu}M$) increased $R_{340/380}$ by $1.1{\pm}0.15$ ($mean{\pm}S.E.$, n=6). When the external $Na^+$ was totally replaced by $NMDG^+$, $R_{340/380}$ was increased by $1.19{\pm}0.17$ in a reversible manner (n=27). $NMDG^+$-induced $[Ca^{2+}]_i$ increase was followed by oscillatory decay after $[Ca^{2+}]_i$ reached the peak level. The increase of $[Ca^{2+}]_i$ by $NMDG^+$ was completely suppressed by replacement with $Cs^+$. When $1{\mu}M$ CCCP was applied to bath solution, the ratio of $[Ca^{2+}]_i$ was increased by $0.4{\pm}0.06$ (n=31). When $1{\mu}M$ CCCP was used for pretreatment before application of $NMDG^+$, oscillatory decay of $[Ca^{2+}]_i$ by $NMDG^+$ was significantly inhibited compared to the control (p＜0.05). In addition, $NMDG^+-induced$ increase of $[Ca^{2+}]_i$ was highly enhanced by pretreatment with $2{\mu}M$ CCCP by $320{\pm}93.7$%, compared to the control ($mean{\pm}S.E.$, n=12). From these results, it is concluded that mitochondria might have buffering contribution to the $[Ca^{2+}]_i$ increase through regulation of the background NSCC in RAECs.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.329-332
• /
• 1988

In this paper, A analysis method about air gap field of L.I.M. considering Transverse Edge Effect is suggested. Especially, the case of displacement of primary and secondary it can be analysed and criteria for design of L. I. M. is proposed by proving the influance of ratio of width for primary and secondary to the characteristic

• 한국환경과학회지
• /
• 제21권12호
• /
• pp.1455-1462
• /
• 2012

The vertical distributions of nitrifying bacteria in aerobic fixed biofilm were investigated to evaluate the relationship between nitrification performance and microbial community at different HRT. Fluorescent in situ hybridization (FISH) and portable ion selective microelectrode system were adopted to analyze microbial communities and ions profiles according to the biofilm depth. Cilia media packed MLE (Modified Ludzack-Ettinger) like reactor composed of anoxic, aerobic I/II was operated with synthetic wastewater having COD 200 mg/L and $NH_4{^+}$-N mg/L at HRT of 6 hrs and 4 hrs. Total biofilm thickness of aerobic I, II reactor at 4 hrs condition was over two times than that of 6 hrs condition due to the sufficient substrate supply at 4 hrs condition (6 hrs; aerobic I 380 ${\mu}m$ and II 400 ${\mu}m$, 4 hrs; aerobic I 830 ${\mu}m$ and II 1040 ${\mu}m$). As deepen the biofilm detection point, the ratio of ammonia oxidizing bacteria (AOB) was decreased while the ratio of nitrite oxidizing bacteria (NOB) was maintained similar distribution at both HRT condition. The ratio of AOB was higher at 4 hrs than 6 hrs condition and $NH_4{^+}$-N removal efficiency was also higher at 4 hrs with 89.2% than 65.4% of 6 hrs. However, the ratio of NOB was decreased when HRT was reduced from 6 hrs to 4 hrs and $NO_2{^-}$-N accumulation was observed at 4 hrs condition. Therefore, it is considered that insufficient HRT condition could supply sufficient substrate and enrichment of AOB in all depth of fixed biofilm but cause decrease of NOB and nitrite accumulation.

• 대한토목학회논문집
• /
• 제12권4_1호
• /
• pp.43-52
• /
• 1992

가로흐름에 같은 수심으로 그리고 직각으로 방류되는 ?흐름의 귀환현상이 차원해석과 수리실험을 통하여 해석된다. 운동량?의 경우 무차원귀환거리 $L/I_m$와 두께 $H/I_m$는 운동량특성길이와 방류구폭의 비 $I_m/W$, 부력?의 경우 무차원귀환거리 $L/I_b$는 부력특성길이와 운동량길특성의 비 $I_b/I_m$, 무차원온도분포 ${\Gamma}_m$은 무차원흐름방향거리 $x/I_b$의 영향을 받으며 이들은 모두 멱법칙으로 예측될 수 있다. 귀환의 발생여부는 속도비 R에 좌우되며 본 연구에서는 R>4.0때 귀환이 발생하지 않는 것으로 나타났다.

• 소성∙가공
• /
• 제16권1호
• /
• pp.48-53
• /
• 2007

LCD-BLU(Liquid Crystal Display - Back Light Unit) consists of several optical sheets: LGP(Light Guiding Plate), light source and mold frame. The LGP of LCD-BLU is usually manufactured by etching process and forming numerous dots with $50{\mu}m$ in diameter on the surface. But the surface roughness of LGP with etched dots is very high, so there is much loss of light. In order to overcome the limit of current etched dot patterned LGP, optical pattern design with microlens of $50{\mu}m$ diameter was applied in the present study. The microlens pattern fabricated by modified LiGA with thermal reflow process was applied to the optical design of LGP and optical simulation was carried out to know tendency of microlens patterned LGP simultaneously. The attention was paid to the effects of different aspect ratio(i.e. $0.2\sim0.5$) of optical pattern conditions to the brightness distribution of BLU with microlens patterned LGP. Finally, high aspect ratio microlens patterned LGP showed superior results to the one made by low aspect ratio in average luminance.

• Journal of Biosystems Engineering
• /
• 제20권1호
• /
• pp.3-12
• /
• 1995

This study was conducted to investigate the cutting mechanism of the reciprocating knife of combine harvester. The cutting operation of reciprocating knife was demonstrated through the cutting pattern diagram which was drawn by computer graphics. Various kinds and dimensions of standard-type reciprocating knives were analyzed by the developed program. The results are summarized as follows : (1) For the 50mm standard reciprocating knife, the bunching area and the maximum stalk-deflection were decreased rapidly according to the increase of cutting velocity ratio by 1.0 and decreased very slowly over this ratio. But, the secondary cut was occurred at ratio of 1.0 and increased rapidly over this ratio. (2) The 76mm standard knife showed better cutting mechanism than the 50mm, in two respects : the larger cutting area per one stroke and the lower revolutional speed of crank shaft for the same cutting velocity. (3) In respect to the bunching area and the secondary cutting length, the adequate height of 50mm standard reciprocating knife was 45~50mm. (4) In order to maintain the proper cutting mechanism, the adequate cutting velocity at forward speed of 0.5㎧ to 1.2m/s was from 0.4m/s to 1.2m/s for the standard knife.