• Applied Chemistry for Engineering
• /
• v.17 no.3
• /
• pp.243-249
• /
• 2006

Porous polymer gel electrolytes (PGEs) based on poly(vinylidenefluoride-co-hexafluoropropylene) (P(VdF-co-HFP)) as a polymer matrix and polyvinylpyrolidone (PVP) as a pore-forming agent were prepared and electrochemical properties were investigated for an electric double layer capacitor (EDLC) in order to increase a permeability of an electrolyte into the PGE. Propylene carbonate (PC) and ethylene carbonate (EC) as plasticizers, and tetraethylammonium tetrafluoroborate ($TEABF_4$) as a supporting salt for the PGE were used. EDLC unit cells were assembled with the PGE and electrode comprising BP-20 and MSP-20 as activated carbon powders, Super P as a conducting agent, and P(VdF-co-HFP)/PVP as a mixed binder. Ion conductivity of PGEs increased with an increased PVP content and was the best at 7 wt% PVP, whereas electrochemical characteristics such as AC-ESR of unit cell were better in 3 wt%. And electrochemical characteristics of the unit cell with PGE were the best at a 33 : 33 weight ratio of PC to EC. Specific capacitance of a mixed plasticizer system of PE and EC was higher than that of pure PC. Ion conductivity of PGEs with a film thickness of $20{\mu}m$ was higher, but electrochemical characteristics of unit cells were higher for a $50{\mu}m$ membrane thickness. Also, the unit cell has shown the highest capacitance of 31.41 F/g and more stable electrochemical performance when PGE and electrode were hot pressed. Consequently, the optimum composition ratio of PGE for EDLCs was 23 : 66 : 11 wt% such as P(VdF-co-HFP) : PVP = 20 : 3 wt% and PC : EC = 44 : 22 wt%. In this case, $3.17{\times}10^{-3}S/cm$ of ion conductivity was achieved at the $50{\mu}m$ thickness of PGE for EDLCs. And the electrochemical characteristics of unit cells were $2.69{\Omega}$ of DC-ESR, 28 F/g of specific capacitance, and 100% of coulombic efficiency.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.5 s.347
• /
• pp.17-23
• /
• 2006

In this paper, Adjacent Channel Power Ratio (ACPR) of wireless Orthogonal Frequency Division Multiplexed (OFDM) system interconnected with Radio over Fiber (RoF) link is analyzed for broadband convergence network applications. Unlike previous results, ACPR of the total link, which is involved with Radio Frequency (RF) amplifier as well as ROF link, at 5.8 GHz in IEEE 802.11a environment is simulated and compared at both system ends.

• 한국가시화정보학회:학술대회논문집
• /
• 2001.12a
• /
• pp.123-137
• /
• 2001

PIV (particle image velocimetry) systems use a camera to take snapshots of particles carried by a fluid at some precise instants. Signal processing methods are then used to compute the flow velocity field. In this paper, the design of the camera objective (optics) is addressed. The optimization is done in order to maximize the signal-to-noise ratio of in-focus particles. Four different kinds of noise are considered: photon shot noise, thermal and read noise, background glow shot noise, and noise made by the other particles. A semi-empirical model for the lens aberrations of a two-doublet objective is first addressed, since further, it is shown that lens aberrations (low f-value $f_{\#}$) should be used instead of the Fraunhofer diffraction (high f-value) for the fitting of the particle image size with the pixel size. Other important conclusions of the paper include the expression of optimum values for the magnification M, for the exposure period $\tau$ and for the pixel size $\xi$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.226-234
• /
• 2017

The physical properties of lightweight foamed concrete mixed with EPS waste and flame resistant EPS waste were investigated. For this purpose, the main variables considered were a cement content of 300 and $400kgf/m^3$ and an EPS replacement ratio of 0, 10, 20, 30, and 40% by the volume ratio of the foam. The water-cement ratio and the dilution concentration were fixed to 0.5 and 10% respectively. The test results showed that the apparent density meets degrees 0.5 and 0.6 of KS F4039, and they showed little difference between the two mixes of Type A and Type B, regardless of the unit cement content. The bending strength obtained through the compressive strength also met the degree of KS F 4039. The thermal conductivity was 1~3% higher for the mixes of EPS than the case of flame resistant EPS, but both mixes met the 0.4 degree of KS F4039. The absorption ratio showed the values above 20% with a 1~3% difference for the two mixes, which mean further studies will be needed to reduce the absorption ratio.

• Journal of Yeungnam Medical Science
• /
• v.12 no.1
• /
• pp.124-134
• /
• 1995

It is the most important to select optimal culture conditions to promote safe embryo growth in the technique of human in vitro fertilization and embryo transfer. It has been shown that the addition of biologic fluids, such as blood serum, of various origins, improved fertilization and early cleavage rates in numerous species. The purpose of this study is to attempt to measure developmental potential of mouse eggs fertilized and cleaved in Ham's F10 culture medium containing a chelating agent, EDTA and fetal cord serum. In this study, we selected 40 female mice and 20 male mice, and investigated optimal serum concentrations for mouse embryo growth. Two cell stage mouse embryos were cultured in Ham's F-10 medium, Ham's F-10 medium with various concentrations of EDTA, or Ham's F-10 medium with EDTA and 10% human cord serum. Developmental ratios to morula in Ham's F-10 medium containing various concentrations of EDTA and/or 10% fetal cord serum were significantly higher than in unsupplemented Ham's F-10 medium (p<0.05). Developmental ratios to blastocyst in Ham's F-10 containing 10% fetal cord serum and $50{\mu}M$ or $100{\mu}M$ EDTA were significanltly higher than in unsupplemented Ham's F-10 medium (p<0.05). Developmental ratios to morula in Ham's F-10 containing 10% fetal cord serum and $100{\mu}M$ EDTA were significanltly higher than in Ham's F-10 with 10% fetal cord serum used commonly in many human IVF centers(p<0.05). Developmental ratio to blastocyst in Ham's F-10 containing 10% fetal cord serum and $100{\mu}M$ EDTA was significanlty higher than in Ham's F-10 with $200{\mu}M$ EDTA(P<0.05). In summary, embryo development to morula and blastocyst was significanlty higher in the presence of human cord serum or EDTA than in the unsupplemented medium. The most significanly development to morula and blastocyst was obtained at Ham's F-10 medium with $100{\mu}M$ concentration of EDTA and 10% fetal cord serum. These results suggest that Ham's F-10 medium containing 10% fetal cord serum and optimal concentrations of EDTA significantly promoted early cleavage of mouse zygotes, and these will be useful as basic data for the selection of culture medium in human in vitro fertilization.

• Journal of Astronomy and Space Sciences
• /
• v.22 no.3
• /
• pp.233-242
• /
• 2005

The absolute dimensions and orbital elements of 66 near contact binaries, collected from literatures, have been analyzed to investigate the physical characteristics of the near contact binaries as well as co-relations among physical parameters. The relationship between the mass ratio and luminosity ratio of the near contact binary systems have been obtained as a $L_2/L_1{\approx}(M_2/M_1)^{1.45}$, which is similar to that of the early type contact binary system. The physical parameters of the new contact binaries show that the difference in mass, radius, luminosity and temperature between the primary and the secondary components for the F type NCBs are smaller than those for the A type NCBs. In H-R diagram, the components of the A types are located closer to the terminal age main sequence than those of the F types.

• Journal of Korean Society of Water and Wastewater
• /
• v.10 no.4
• /
• pp.119-126
• /
• 1996

Influence factors and efficiency characteristics for treatment of wastewater containing phenol were studied with using Pseudomonas sp. B3. It took 130 hours to remove phenol, when only activated sludge of terminal disposal palnt of sewage was innoculated in batch culture, but it was required just 36 hours, when bacteria degrading phenol and activated sludge were simultaneously innoculated. If only phenol an carbon source was used, it necessary 36 hours for biodegradation of phenol, while glucose was added to medium, it took 73 hours. It was revealed as excellent effluent and SVI, when the F/M ratio, COD and phenol concentration were 53mg/l and 1.2mg/l, respectively, and optimum F/M ratio was revealed 0.31. The reactor were seriously shocked as reducing hydraulic retention time at constant phenol concentration more than increasing phenol concentration at constant hydraulic retention time, when volumetric loading rate was increased to $0.8kg\;phenol/m^3{\codt}d$ from $1.6kg\;phenol/m^3{\codt}d$. And also the effluent phenol concentration was 34mg/l after starting 12 hours of shocking and reactor was recovered as steady state after 65 hours of changing in the former test. Although the effluent phenol concentration was maximum value with 12mg/l after starting 20 hours of shocking and reactor was recovered as steady state after 54 hours of changing in the later test.

• Journal of Information Display
• /
• v.4 no.2
• /
• pp.19-24
• /
• 2003

In order to improve the device performances of organic electroluminescent devices (OELDs), the efficiency of carrier injections into the organic layers from electrodes and the balance of injected carrier densities in the emission region are critical factors. Especially, energy barriers, which exist at the interfaces between electrodes and organic layers, interrupt carrier injections, which lead to unbalanced carrier densities. In this study, ${\alpha}-septithiophene$ (${\alpha}$-7T), as a buffer layer, and composite cathode composed of Al and CsF were formed to improve hole and electron injections, respectively. The orientations of ${\alpha}$-7T molecules were adjusted using the simple rubbing method and the mass ratio of CsF was varied from 1 to 10 wt%. Upon investigation of we believe that the 3 wt% mass ratio of CsF and the horizontal orientation of ${\alpha}$-7T molecules are the optimized conditions for achieving better the performance of OELDs. Device with the horizontally oriented 20 nm thick ${\alpha}$-7T layer and composite cathode shows a turn-on voltage of 7V and luminance of 172 cd/$m^2$ at 4 mA/$cm^2$.

• Journal of Wetlands Research
• /
• v.17 no.3
• /
• pp.311-319
• /
• 2015

The Korean government has made progress in its project for sewage distribution in rural areas to ensure the balanced development of the country and its water conservation system. The project for sewage distribution in rural areas was analyzed with the yearly operational results of municipal wastewater treatment plant (MWTP). The sewage characteristics of the MWTP in a rural area changed according to seasonal variations, and the lowest pollution concentrations were obtained in the summer. The treatment efficiency of nutrients in the biological treatment process changed slightly more than the treatment efficiency of organic compounds, and the lowest treatment efficiency was obtained in winter. In addition, the relationship between treatment efficiency and retention time and F/M ratio showed similar results despite seasonal variations. It was considered that sewage characteristics and treatment efficiency changed according to seasonal variations when the treatment process was selected in MWTPs in rural areas. Especially, Maintenance of MWPT is need for the stable treatment efficiency of nutrients in the winter.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.14
• /
• pp.5899-5902
• /
• 2015

Background: To compare the current histologic distribution of lung cancer in Lebanon to the worldwide trends, according to the 2004 WHO Classification. Materials and Methods: 1,760 patients with a pulmonary pathology examination at Hotel-Dieu de France University Hospital between July 2009 and July 2014 were included. Results: Some 676 out of the total investigated patients (38.4%) had a lung tumor. In 665 (98.4%) the tumors were malignant, with a mean age at diagnosis of 63.8 years and a male/female (M/F) sex ratio of 1.7:1. Among the malignant tumors, 86.2% were epithelial tumors with a mean age at diagnosis of 64.8 years and an M/F sex ratio of 1.9. Other malignant tumors consisted of metastatic tumors (10.2%), lymphoproliferative tumors (2.1%) and mesenchymal tumors (1.5%). Most common carcinoma subtypes were adenocarcinoma (48.0%), squamous cell carcinoma (23.0%) and small cell carcinoma (13.3%). Carcinoid tumors were the only carcinoma subtype with an M/F sex ratio below 1 (0.7). Salivary gland tumors were the carcinoma with lowest mean age at diagnosis (45.5 years). Conclusions: The histologic distribution of lung tumors in Lebanon is similar to that in developed countries. We believe this resemblance is due to common smoking habits, known to be responsible for the increase of lung adenocarcinoma at the expense of other subtypes.