• Korean Journal of Acupuncture
• /
• v.19 no.2
• /
• pp.97-117
• /
• 2002

Chiropractic is very similar to Oriental Medicine in philosophy on the cause of diseases and in utilization of spinal articulations for diagnosis and treatment. In this paper the spinal area used to treat liver dysfunction in S.O.T. technique, one of chiropractic techniques, was compared to the acupncture points used to cure the same conditions. Because both Oriental medicine and Chiropractic are dealing with autonomic nervous system in regulating abnormal conditions, also the innervation of spinal nerves to those areas was checked. The spinal area that S.O.T. technique utilizes to correct liver dysfunction is transverse processes of T8, which corresponds to B16. Acupncture points from this level down to T12/L1, which are B16, B17, B18, B19, B20, B21, B45, B46, B47, B48, B49, B50, GV6, GV7, GV8 and GV9, all have been applied to control liver function. Apparent discrepency exists in therapeutic areas for liver malfunction between the two natural healing arts. According to the neurology texts, liver is innervated by sympathetic fibers from the 7th-10th thoracic segments and by parasympathetic fibers from vagus nerve. Sympathetic afferent nerves from the liver reach the 7th-12th thoracic spinal cord segments. It can be said all the 7th-12th thoracic spinal cord segments are related to liver function. Therefore the areas used for liver dysfunction in both natural medicine are appropriately selected. However, B16, the Oriental medical equivalent of the main spinal area which is used for lowered liver function in C.M.R.T. Technique, is not utilized as frequent as in Oriental medicine.

• Steel and Composite Structures
• /
• v.34 no.2
• /
• pp.227-239
• /
• 2020

The aim of this study is to obtain the nonlinear and post-buckling responses of relatively thick functionally graded plates with oblique elliptical cutouts using a new semi-analytical approach. To model the oblique elliptical hole in a FGM plate, six plate-elements are used and the connection between these elements is provided by the well-known Penalty method. Therefore, the semi-analytical technique used in this paper is known as the plate assembly technique. In order to take into account for functionality of the material in a perforated plate, the volume fraction of the material constituents follows a simple power law distribution. Since the FGM perforated plates are relatively thick in this research, the structural model is assumed to be the first order shear deformation theory and Von-Karman's assumptions are used to incorporate geometric nonlinearity. The equilibrium equations for FGM plates containing elliptical holes are obtained by the principle of minimum of total potential energy. The obtained nonlinear equilibrium equations are solved numerically using the quadratic extrapolation technique. Various sets of boundary conditions for FGM plates and different cutout sizes and orientations are assumed here and their effects on nonlinear response of plates under compressive loads are examined.

• Transactions of Materials Processing
• /
• v.16 no.5 s.95
• /
• pp.348-353
• /
• 2007

The propagation of a macro-scale crack and the accompanying transformation zone around it was visualized in an Y-TZP ceramic using a mechano-luminescence (ML) technique. The technique allows realistic fractures that take place catastrophically in actual applications to be realistically stimulated. Unlike conventional quasi-static R-curves, the ML technique on a relatively fast time frame permitted a so-called quasi-dynamic R-curve in the crack speed range from 50 to 140 m/sec. to be measured. Effective toughening then commenced and the applied stress intensity factor increased to 27 $MPa{\sqrt{m}}$. The transformation zone height obtained from the ML observations was in good agreement with that predicted by the Marshall model, and coincided with previously observed results for quasi-static conditions by Raman spectorscopy and x-ray analysis.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1088-1091
• /
• 2009

A boost converter with charge-recycling technique fabricated by $0.25{\mu}m$ CMOS BCD process can provide different supply voltages to drive series RGB LEDs in sequence for reducing the power consumption on the constant current generator. The proposed technique stores and restores extra energy to improve the efficiency, as well as enhances the reference tracking response. Experimental results show that the period of reference-tracking response can be improved. When the load current is 100mA, the periods of reference down-tracking and uptracking are smaller than $10{\mu}s$ and $20{\mu}s$, respectively. Experimental results demonstrate fast and efficient reference tracking performance is achieved.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.11a
• /
• pp.377-378
• /
• 2008

• Korean Journal of Applied Biomechanics
• /
• v.17 no.1
• /
• pp.155-164
• /
• 2007

This study is to find out effective defensive type by analysis on differences among three different defence types of the body lock technique in the ground wrestling. The subjects are 5 athletes who are in 60kg weight class. To get the kinematic analysis seven ProReflex MCU-240(Motion Capture Unit), infrared rays cameras, which was produced by Qualisys, were used to get a two-dimensional coordinate. Following are the analysis result from kinematic factors such as time element, speed element and angular element. 1. During position of ground wrestling, the average necessary time until defender's hip joint touches the mat for Phase1 was $0.34{\pm}0.14sec$ at side position was the shortest space of time out of three types, and Phase2 was $0.21{\pm}0.02sec$ at front position was the shortest space of time out of three types. Moreover, side defence position was the shortest for total average necessary time with $0.78{\pm}0.05sec$. 2. The movement change for hip joint was $57.21{\pm}20.17cm$ for front, $43.35{\pm}7.13cm$ for rear, and $18.67{\pm}10.24cm$ for side at Phase1 and $42.08{\pm}17.56cm$ for side, $16.61{\pm}6.34cm$ for front, and $1.48{\pm}1.29cm$ for rear at Phase2. 3. Movement speed of hip joint at defensive type were most effective in success and fail rate at Phase 1 and its frontal average speed was fastest with $1.01{\pm}0.23m/s$ following by $0.52{\pm}0.15m/s$ for side, and $0.62{\pm}0.15m/s$ for rear. The average for total change of speed is $0.79{\pm}0.32m/s$ for front, $0.78{\pm}0.17m/s$ for side, and $0.49{\pm}0.08m/s$ for rear. 4. The joint angle gets smaller in a order by rear, front, and side for the size of hip joint angle and knee angle for different defensive type. 5. As a result of one-way ANOVA on linear velocity for hip joint in frontal defence(phase1) was significance ($\alpha$=.05), but phase 2 was not significance. Synthetically, analyzing on differences among three different defence types which were front, rear, and side of the body lock technique in the ground wrestling, front defensive type was the most effective. In future, there should be more studies regarding on defence at not a laboratory study but a field study to help out wrestler to pertinent techniques to improve the game of wrestling.

• Journal of the Korean Society of Radiology
• /
• v.15 no.2
• /
• pp.93-100
• /
• 2021

The purpose of this study is to find out the factors that affect the patient's exposure dose during the abdominal CT scan using the bolus tracking technique, and reducing the radiation exposure to the patient during the abdominal CT scan using the bolus tracking technique by adjusting the delay time according to the corresponding factor. The experiment was divided into two parts, and the first experiment was conducted with 300 patients There were 188 males and 112 females, and their average age was 58±12.18(19~85). In the second experiment, 150 subjects (100 males and 50 females) who were undergoing their follow-up examination among the first experiment subjects, and the difference in dose before and after was compared by applying the delay time according to the influencing factor. As a result of the first experiment, there was a relationship between the arrival time of the contrast media and the heart rate, and it was found that the arrival time decreased as the heart rate increased for both men and women. As a result of the second experiment, the average dose of CTDIvol and DLP before/after applying the delay time according to the heart rate decreased 4.98 mGy and 5.33 mGy·cm in the male group, and 3.54 mGy and 3.88 mGy·cm in the female group. By applying proper delay time according to the patient's heart rate during abdominal CT scan with the bolus tracking technique, the radiation exposure dose of the patient can be reduced.

• Progress in Superconductivity and Cryogenics
• /
• v.10 no.1
• /
• pp.28-31
• /
• 2008

22.9kV 50MVA HTS power cable has been developed and tested by Korea Electrotechnology Research Institute and LS Cable Company and it was supported by a grant from Center for Applied Superconductivity Technology of the 21st Century Frontier R&D Program. In this paper, DC Ic of 100m HTS cable which is installed at Kochang testing station was measured and analyzed. A measurement technique of DC Ic used by resistance and inductance removal method is established.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.8 s.350
• /
• pp.19-26
• /
• 2006

In this paper, CMOS analog-to-digital converter (ADC) with a 6-bit 100MSPS at 1.8V is described. The architecture of the proposed ADC is based on a folding type ADC using resistive interpolation technique for low power consumption. Further, the number of folding blocks (NFB) is decreased by half of them compared to the conventional ones. A moebius-band averaging technique is adopted at the proposed ADC to improve performance. With the clock speed of 100MSPS, the ADC achieves an effective resolution bandwidth (ERBW) of 50MHz, while consuming only 4.5mW of power. The measured result of figure-of-merit (FoM) is 0.93pJ/convstep. The INL and DNL are within ${\pm}0.5 LSB$, respectively. The active chip occupies an area of $0.28mm^2$ in 0.18um CMOS technology.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.90-93
• /
• 1999

In this paper a local remeshing technique assisted by user-interface capabiities is presented for precise forging simulation. The rigid-plastic finite element formulation is introduced and the basic approach to the new local remeshing technique is presented. A piercing process in cold forging is simulated by the presented technique and the results are compared in detail.