• Hip & pelvis
• /
• 제35권2호
• /
• pp.122-132
• /
• 2023

Purpose: The dome technique is a technique used in performance of revision total hip arthroplasty (THA) involving intraoperative joining of two porous metal acetabular augments to fill a massive anterosuperior medial acetabular bone defect. While excellent outcomes were achieved using this surgical technique in a series of three cases, short-term results have not been reported. We hypothesized that excellent short-term clinical and patient reported outcomes could be achieved with use of the dome technique. Materials and Methods: A multicenter case series was conducted for evaluation of patients who underwent revision THA using the dome technique for management of Paprosky 3B anterosuperior medial acetabular bone loss from 2013-2019 with a minimum clinical follow-up period of two years. Twelve cases in 12 patients were identified. Baseline demographics, intraoperative variables, surgical outcomes, and patient reported outcomes were acquired. Results: The implant survivorship was 91% with component failure requiring re-revision in only one patient at a mean follow-up period of 36.2 months (range, 24-72 months). Three patients (25.0%) experienced complications, including re-revision for component failure, inter-prosthetic dual-mobility dissociation, and periprosthetic joint infection. Of seven patients who completed the HOOS, JR (hip disability and osteoarthritis outcome score, joint replacement) survey, five patients showed improvement. Conclusion: Excellent outcomes can be achieved using the dome technique for management of massive anterosuperior medial acetabular defects in revision THA with survivorship of 91% at a mean follow-up period of three years. Conduct of future studies will be required in order to evaluate mid- to long-term outcomes for this technique.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 D
• /
• pp.1028-1031
• /
• 1997

This Paper Presents a new digital balance relaying technique in two Parallel transmission lines. To obtain relaying signals, selected model is simulated using EMTDC. Test results of the proposed method show efficacy.

• 복식문화연구
• /
• 제21권1호
• /
• pp.93-116
• /
• 2013

This paper explored and compared the textile pattern and motive design of fashion designers' brands and H&M collaboration collections. In particular, this study put it focus on textile pattern design of seven fashion design brands such as Roverto Cavalli and Versace, etc., which were collaborated with H&M. The color, motive type, motive layout, motive expression, and pattern drawing technique were collected from fashion internet sites over the five year period, and then were cross-sectionally examined and compared based on their color, motive type, motive layout, motive expression, and pattern drawing technique of products between fashion designers' brands and H&M collaboration collections. The analyses showed the following results: First, the similar color, motive type, motive layout, motive expression, and pattern were found between fashion designers' brands and H&M collaboration collections, in order to show the perspective texture of products to consumers. Second, H&M collaboration brands demonstrated unique textile design of H&M rather than the trendy design patterns. Finally, the textile design pattern used in H&M collection was more restricted in terms of motive expression technique and chromaticity than that used in fashion designers' brands.

• 대한수의학회지
• /
• 제42권2호
• /
• pp.225-229
• /
• 2002

We report that mycoplasma organisms from lung tissues of slaughter pigs were identified to genes fragments with references use of nested-PCR technique(nPCR). Seven strains of mycoplasma species were isolated from 70 lung tissues. The organisms were detected by in vitro amplification of 16S rRNA and 23S rRNA genes. Nucleotide sequences of the spacer between 16S and 23S in the ribosomal RNA operons of mycoplasma were identified by the analysis of products from the nested PCR. Four common PCR primers, MhF1, MhF2 MhR1 and MhR2, were designed by analysis between these sequences by first amplified with F1, R1 and second with F2, R2, respectively. Specific amplification of the spacer region for reference strains of M. hyopneumoniae, M. hyorhinis, M. flocculare were confirmed by first round of PCR in which the traduced fragments of 690bp, 460bp, 630bp. But amplications of second round was changed to 240bp, 210bp, 230bp, respectively. Three different strains (M. hyopneumoniae:4, M. hyorhinis:2, M. flocculare:1) were detected by the nested-PCR technique. The results suggest that the detection of swine mycoplasma by n-PCR can be analyzed the nucleotide sequences between rRNA operons and homology study.

• Parasites, Hosts and Diseases
• /
• 제51권6호
• /
• pp.743-745
• /
• 2013

We compared the efficacy and applicability of a modified formalin-ether concentration technique (M-FECT) to the conventional FECT (C-FECT) and the agar plate culture (APC) method for the detection of Strongyloides stercoralis larvae. For this purpose, we used 600 human fecal specimens collected in an endemic area of southern Thailand. In the M-FECT, we used 2 layers of wire meshes, instead of gauze, to avoid the loss by absorption/adhesion of larvae to the gauze during filtration, and we reduced the exposure time of S. stercoralis larvae in stool samples to formalin. By such simple modifications, the efficacy of M-FECT has become comparable to APC and was much better than that of C-FECT for the diagnosis of strongyloidiasis.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.479-482
• /
• 2002

Riblets with longitudinal grooves along the streamwise direction have been used as an effective flow control technique for drag reduction. A flexible micro-riblet with v-grooves of peak-to-peak spacing of $300{\mu}m$ was made using a MEMS fabrication process of PDMS replica. The flexible micro-riblet was attached on the whole surface of a NACA0012 airfoil with which grooves are aligned with the streamwise direction. The riblet surface reduces drag coefficient about $7.9{\%}\;at\;U_o=3.3m/s$, however, it increases drag about $8{\%}\;at\;U_o=7.0m/s$, compared with the smooth airfoil without riblets. The near wake has been investigated experimentally far the cases of drag reduction ($U_o\;=\;3.3 m/s$) and drag increase ($U_o\;=\;7 m/s$). Five hundred instantaneous velocity fields were measured for each experimental condition using the cross-correlation PIV velocity field measurement technique. The instantaneous velocity fields were ensemble averaged to get spatial distribution of turbulent statistics such as turbulent kinetic energy. The experimental results were compared with those of a smooth airfoil under the same flow condition. The micro-riblet surface influences the near wake flow structure largely, especially in the region near the body surface

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.200-203
• /
• 2001

Micromolding methods such as micro-injection molding and micro-compression molding are most suitable for mass production of plastic micro-optics with low cost. In this study, plastic micro-optical components, such as refractive microlenses and diffractive optical elements(DOEs) with various grating patterns, were fabricated using micro-compression molding process. The mold inserts were made by ultrapricision mechanical machining and silicon etching. A micro compression molding system was designed and developed. Polymer powders were used as molded materials. Various defects found during molding were analyzed and the process was optimized experimentally by controlling the governing process parameters such as histories of mold temperature and compression pressure. Mim lenses of hemispherical shape with $250{\mu}m$ diameter were fabricated. The blazed and 4 stepped DOEs with $24{\mu}m$ pitch and $5{\mu}m$ depth were also fabricated. Optical and geometrical properties of plastic molded parts were tested by interferometric technique.

• 전기학회논문지
• /
• 제60권2호
• /
• pp.320-324
• /
• 2011

A digital technique is adopted to calibrate the current mismatch of the charge pump (CP) in phase-locked loops. A 2 GHz charge pump PLL (CPPLL) is used to justify the proposed calibration technique. The proposed digital calibration technique is implemented simply using a counter. The proposed calibration technique reduces the calibration time by up to a maximum of 50% compared other with techniques. Also by using a dual-mode CP, good current matching characteristics can be achieved to compensate $0.5{\mu}A$ current mismatch in CP. It was designed in a standard $0.13{\mu}m$ CMOS technology. The maximum calibration time is $33.6{\mu}s$ and the average power is 18.38mW with 1.5V power supply and effective area is $0.1804mm^2$.

• 한국미생물·생명공학회지
• /
• 제17권5호
• /
• pp.499-503
• /
• 1989

Cryptosporidium이 인체 내에서 복잡한 life cycle를 거치면서 각 stage마다 만들어지는 단백질 항원의 관계성에 관한 보고가 없어 Cryptosporldiosis에 대한 치료제 개발에 어려움이 있었다. 본 연구는 단일군 항체와 Immunogold labeling 기술을 이용하여 주요 extracellular stages인 sporozoites와 merozoites의 antigenic relatedness를 살펴보았다. BALB/C 쥐로부터 merozoites에 대한 단일군 항체(Jo3)를 분리하였으며 IgG3형이었다. 정제된 sporozoites를 SDS-PAGE로 분리한 후 Western blot을 이용하여 Jo3를 반응시킨 결과 3,500Daltons 크기의 sporozoites 항원을 인식하였다. Jo3를 Cryptosporidium에 감염된 tissue section에 반응시킨 후 Immunoelectron microscopy를 이용하여 3.5-kDa 항원의 위치와 sporozoites와 merozoites가 똑같은 단백질 항원을 만드는가를 추적해 본 결과 3.5-kDa 단백질 항원이 두 stages에서 공동으로 합성되는 것으로 나타났으며 이 항원은 표면과 세포질 내에 위치하고 있었다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권6호
• /
• pp.760-770
• /
• 2016

A 12-bit 750 kS/s Dual-Sampling Successive Approximation Register Analog-to-Digital Converter (SAR ADC) technique with reduced Capacitive DAC (CDAC) is presented in this paper. By adopting the Adaptive Power Control (APC) technique for the two-stage latched type comparator and using bootstrap switch, power consumption can be reduced and overall system efficiency can be optimized. Bootstrapped switches also are used to enhance the sampling linearity at a high input frequency. The proposed SAR ADC reduces the average switching energy compared with conventional SAR ADC by adopting reduced the Most Significant Bit (MSB) cycling step with Dual-Sampling of the analog signal. This technique holds the signal at both comparator input asymmetrically in sample mode. Therefore, the MSB can be calculated without consuming any switching energy. The prototype SAR ADC was implemented in $0.18-{\mu}m$ CMOS technology and occupies $0.728mm^2$. The measurement results show the proposed ADC achieves an Effective Number-of-Bits (ENOB) of 10.73 at a sampling frequency of 750 kS/s and clock frequency of 25 MHz. It consumes only 0.13 mW from a 5.0-V supply and achieves the INL and DNL of +2.78/-2.45 LSB and +0.36/-0.73 LSB respectively, SINAD of 66.35 dB, and a Figures-of-Merit (FoM) of a 102 fJ/conversion-step.