• 디지털융복합연구
• /
• 제12권10호
• /
• pp.385-390
• /
• 2014

이 연구의 목적은 복부 MRI검사에 유용한 m-DIXON기법이 기존 e-THRIVE기법에 비해 임상적으로 유용한 검사인지 알아보기 위해 2013년 9월부터 2014년 2월까지 간 질환을 주소로 복부 MRI검사를 시행한 84명을 대상으로 분석하였다. 연구결과에서 SNR은 m-DIXON기법 $90.42{\pm}16.90$, e-THRIVE $60.42{\pm}11.54$로 나타났으며, CNR은 m-DIXON기법 $52.38{\pm}22.58$, e-THRIVE기법 $46.31{\pm}20.25$로 나타났다. 정성적 평가는 m-DIXON기법에서 영상의 질 $4.06{\pm}0.34$, 인공물 $3.64{\pm}0.22$, 지방소거 $4.16{\pm}0.15$로 나타났으며, e-THRIVE기법에서 영상의 질 $3.14{\pm}0.35$, 인공물 $3.06{\pm}0.38$, 지방소거 $3.14{\pm}0.30$으로 나타났다. 결론적으로 복부 MRI검사에서 m-DIXON기법은 e-THRIVE 기법에 비해 정량적 평가 및 정성적 평가에서 우수한 것으로 나타나, 향후 복부질환의 진단에 유용하게 활용할 것을 제안한다.

• Parasites, Hosts and Diseases
• /
• 제30권2호
• /
• pp.141-146
• /
• 1992

Kato후층도말변법 (M.C.T.S.)과 Stoll 회석충란계산법(D.E.C.T)으로 회충, 괸충, 간흡 충란 양성자 197명에 대하여 충란 정량검사를 실시하고 그 결과를 비교하여 상관함수식을 도출하였다. M.C.T.S.법에 소요된 검경시간은 표본 1매당 평균 12.6분으로 D.E.C.T.법의 14.6분보다 짧았으며, 층계부하가 낮은 감염자에 있어서도 위음성이 적었다. 각 윤충류 충란에 있어서 M.C.T.S.으로 얻은 결과를 대변 1 g당 충란수(E.P.G.)로 바꾸어 주는 전환함수식은 회충의 경우 E.P.G.=47.86×100.87 logM.C.T.S., 편충은 E.P.G.=41.69×100.83 logM.C.T.S., 간흡충은 E.P.G=63.10×100.55 logM.C.T.S.이었다. 장내 윤충류 감염에 대한 정량적 대변검사법으로 Kato후층도말변법이 Stoll희석충란계산 법보다 더 유용하다고 생각되었다.

• Nuclear Engineering and Technology
• /
• 제55권11호
• /
• pp.4213-4227
• /
• 2023

Computer Automated Radioactive Particle Tracking (CARPT) technique has been successfully utilized to measure the velocity profiles and mixing parameters in different multiphase flow systems where a single radioactive tracer is used to track the tagged phase. However, many industrial processes use a wide range of particles with different physical properties where solid particles could vary in size, shape and density. For application in such systems, the capability of current single tracer CARPT can be advanced to track more than one particle simultaneously. Tracking multiple particles will thus enable to track the motion of particles of different size shape and density, determine segregation of particles and probing particle interactions. In this work, a newly developed Multiple Radioactive Particle Tracking technique (M-RPT) used to track two different radioactive tracers is demonstrated. The M-RPT electronics was developed that can differentiate between gamma counts obtained from the different radioactive tracers on the basis of their gamma energy peak. The M-RPT technique was validated by tracking two stationary and moving particles (Sc-46 and Co-60) simultaneously. Finally, M-RPT was successfully implemented to track two phases, solid and liquid, simultaneously in three phase slurry bubble column reactors.

• 한국세라믹학회지
• /
• 제45권5호
• /
• pp.303-308
• /
• 2008

Mullite precursors were synthesized with aluminosilicate gels from mixture of aluminum nitrate and sodium orthosilicate by the geopolymer technique at ambient temperature. Then, the gel was heat-treated in air up to $1200^{\circ}C$ at intervals of $100^{\circ}C$. Raw and heat-treated gels were characterized by TG-DTA, XRD, FTIR, $^{29}Si$ MAS-NMR, TEM. The result to examine the crystallization of behavior though DTA, the synthesized precursors were crystallized in the temperature range from $950^{\circ}C$ to $1050^{\circ}C$. The XRD results showed that the gel compositions were begun to crystallize at various temperature. Also, it was found that the precursors of M-4 begun to crystallize at about $950^{\circ}C$. The M-4 XRD peaks were characterized better than $M-1{\sim}M-3$ at $1000^{\circ}C$. The formation temperature of mullite in this study is much lower than that of previous sol-gel methods, which crystallized at up of $1200^{\circ}C$. TEM investigations revealed that the sample with 10 nm particle size was obtained via heat-treated at $1000^{\circ}C$ for M-4.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2014년도 춘계학술대회
• /
• pp.36-37
• /
• 2014

It is necessary to develop highly sophisticated Modeling & Simulation (M&S) system for the scientific investigation of marine accident causes and for the systematic reproduction of accidental damage procedure. To ensure an accurate and reasonable prediction of marine accidental causes, such as collision, grounding and flooding, full-scale ship M&S simulations would be the best approach using hydrocode, such as LS-DYNA code, with its Fluid-Structure Interaction (FSI) analysis technique. The objectivity of this paper is to present three full-scale ship collision, grounding and flooding simulation results of marine accidents, and to show the possibility of the scientific investigation of marine accident causes using highly sophisticated M&S system.

• 한국군사과학기술학회지
• /
• 제13권5호
• /
• pp.818-823
• /
• 2010

Exploiting models and simulations are encouraged among the defense acquisition society, as now enforced by the Defense Aquisition Program Administration's regulations. They are useful and, sometimes, inevitable especially in an earlier phase of system development. Computer-simulation-based experimentation technique for the system operational performance analysis for a torpedo defense system is introduced in this paper. Problem definition for the torpedo defense system analysis and engineering efforts for models and simulations development are presented here, including defining measures of performance and effectiveness for the torpedo defense system, conceptual modeling for torpedo engagement and defense simulation, design of experimentation, design of simulator and experimentor, and hardware and software implementation of an analysis support tool - a system operations demonstration and experimentation simulator.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권4호
• /
• pp.443-450
• /
• 2016

The linearization technique for low noise amplifier (LNA) has been implemented in standard $0.18-{\mu}m$ BiCMOS process. The MOS-BJT derivative superposition (MBDS) technique exploits a parallel LC tank in the emitter of bipolar transistor to reduce the second-order non-linear coefficient ($g_{m2}$) which limits the enhancement of linearity performance. Two feedback capacitances are used in parallel with the base-collector and gate-drain capacitances to adjust the phase of third-order non-linear coefficients of bipolar and MOS transistors to improve the linearity characteristics. The MBDS technique is also employed cascode configuration to further reduce the second-order nonlinear coefficient. The proposed LNA exhibits gain of 9.3 dB and noise figure (NF) of 2.3 dB at 2 GHz. The excellent IIP3 of 20 dBm and low-power power consumption of 5.14 mW at the power supply of 1 V are achieved. The input return loss ($S_{11}$) and output return loss ($S_{22}$) are kept below - 10 dB and -15 dB, respectively. The reverse isolation ($S_{12}$) is better than -50 dB.

• Restorative Dentistry and Endodontics
• /
• 제28권2호
• /
• pp.134-145
• /
• 2003

Mechanical properties and microleakage of two composites [conventional hybrid type DenFil (VERICOM Co., Anyang, Korea) / micro matrix hybrid type Esthet X (Dentsply Caulk, Milford, DE, U.S.A.)] were evaluated to assess whether variable light intensity curing is better than conventional curing technique. Curing was done for 40 seconds in two ways of 2 step soft-start technique and 5 step ramping technique. Three kinds of light intensities of 50, 100, $200{\;}mW/\textrm{cm}^2$ were initially used for 10, 20, 30 seconds each and the maximum intensity of $600 {\;}mW/\textrm{cm}^2$ was used for the rest of curing time in a soft-start curing tech nique. In a ramping technique, curing was done with the same initial intensities and the light intensity was increased 5 times with the same rate to the maximum intensity of $600{\;}mW/\textrm{cm}^2$. After determining conditions that showed no different mechanical properties with conventional technique, Esthet X composite was filled in a class V cavity, which dimension was $4{\times}3{\times}1.5{\;}mm$ and cured under those conditions. Microleakage was evaluated in two ways of dye penetration and maximum gap estimation through SEM observation. ANOVA and Spearman's rho test were used to confirm any statistical significance among groups. The results were as follows : 1 Several curing conditions of variable light intensities resulted in the similar mechanical properties with a conventional continuous curing technique, except conditions that start curing with an initial light intensity of $50{\;}mW/\textrm{cm}^2$. 2. Conventional and ramping techniques were better than soft-start technique in mechanical properties of microhardness and compressive strength. 3. Soft-start group that started curing with an initial light intensity of $100{\;}mW/\textrm{cm}^2$ for 10 seconds showed the least dye penetration. Soft-start group that started curing with an initial light intensity of $200{\;}mW/\textrm{cm}^2$ for 10 seconds showed the smallest marginal gap, if there was no difference among groups. 4. Soft-start technique resulted in better dye-proof margin than conventional technique(p=0.014) and ramping technique(p = 0.002). 5. There was a very low relationship(p=0.157) between the methods of dye penetration and marginal gap determination through SEM evaluation. From the results of this study, it was revealed that ramping technique would be better than conventional technique in mechanical properties, however, soft-start technique might be better than conventional one in microleakage. It was concluded that much endeavor should be made to find out the curing conditions, which have advantages of both aspects or to solve these kinds of problems through a novel idea of polymerization.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(2)
• /
• pp.164-167
• /
• 2000

This paper introduces the design of high-speed analog-to-digital converter for hard disk drive (HDD) read channel. This is based on autozero technique for low-error rate, and Double Speed Dual ADC(DSDA) technique lot efficiently increasing the conversion speed of A/D converter. This An is designed by 6bit resolution, 800M sample/s maximum conversion rate, 390㎽ power dissipation, one clock cycle latency in 0.65 $\mu\textrm{m}$ CMOS technology.

• 화약ㆍ발파
• /
• 제23권3호
• /
• pp.27-42
• /
• 2005

본 연구에서는 $PFC^{3D}$상에서 공내입자들의 반경을 팽창/수축시키는 기법을 통해 공벽입자들에 접촉력의 형태로 폭발압력을 부여하는 폭원모델링을 기법을 소개하고, 제안된 기법을 이용하여 홉킨슨 효과 효과와 스폴링 현상을 응용하여 암석코어에 대한 응력파의 전파 및 반사과정을 기존의 외력을 적용함으로써 서로 비교하여 보았다. 암석코어는 직경 20m, 길이 200mm의 입자결합체로서 접촉결합을 이용하여 구성하였으며, 시료의 선단에 주기 0.050m$(50{\mu}s)$의 펄스형태의 폭발하중을 기존의 방법과 제안된 폭원모델링 기법을 이용하여 각기 입사시켰다. 해석결과 두 기법은 서로 유사한 결과를 보였으며, 입사압축파는 0.060ms$(60{\mu}s)$ 이후 시료의 후단에서 반사되어 반사인장파의 형태로 되돌아오면서 시료의 축방향과 직각방향으로 인장균열을 발생시켰다. 또한 시료 중을 전파하는 응력파의 속도는 4,167m/s로 계산되어 물리시료에 대한 측정치 4,300m/s와 $3\%$ 정도의 근소한 오차를 보였다.