• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.5
• /
• pp.982-988
• /
• 2009

In a surface type ac PDP having $200{\mu}m$ gap between the surface electrodes, the luminous efficacy has a reciprocal dependence on the sustaining frequency. The discharge current flowing to the address electrodes are measured to investigate the phenomena and spectral intensity from visible light to infra red is measured to verify phosphor saturation with the frequency. Experiments show the discharge between the address and surface electrodes deteriorates the efficacy in high sustaining frequencies. Pulse width modulation is introduced to improve the efficacy. In optimum conditions, we obtained 1.99lm/w and 1.79lm/w at 200kHz and 250kHz, respectively.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.3
• /
• pp.44-50
• /
• 2005

This paper deals with the characteristics and reduction methods of the plasma luminosity caused between the ZnO surge arrester block and metal electrodes. In this study, the impulse current generator that can generate $8/20[{\mu}s]$ impulse currents with a peak short-circuit of 10[kA] is designed and fabricated. Plasma luminosity phenomena for fine and used ZnO blocks were observed as a function of the contact states between the ZnO block and electrodes and the polarity of applied impulse voltages. As a result, discharge luminous events are produced near the contact edges between the ZnO block and metal electrodes. The discharge plasma luminosity between the ZnO surge arrester block and low potential electrode is more intensive than that between the ZnO surge arrester block and high potential electrode. Surface flashover of ZnO blocks are mainly caused by plasma generation near the edge of metal electrode. Also, plasma luminosity for the fine ZnO blocks is less than that for the used ZnO blocks. Plasma luminosity at the contact of the ZnO block and ring-type electrode is more intensive than that at the contact of ZnO block and disk electrode. It is desirable to use the disk electrode with the proper contact area to reduce the plasma luminosity caused at the contact point between the ZnO block and electrodes.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.57.4-57.4
• /
• 2015

Light bending by gravity was the key prediction of general relativity. Solar eclipse expedition of 1919 provided the observational support for the theory of general relativity. Diverse gravitational lensing, i.e., light bending, phenomena have been speculated and predicted by general relativity and ultimately discovered many years later. Gravitationally lensed quasars, luminous arcs, weak lensing, and microlensing have provided invaluable information about the distribution of matter, especially of dark matter, and the cosmology. Gravitational lensing is one of the most spectacular manifestation of general relativity and will remain as an extremely useful astrophysical tools in the future.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1996.11a
• /
• pp.53-56
• /
• 1996

In this paper, the pulsed mode operated gas discharge tube is composed with mixed gas of Hg-Ne (10 Torr), in the tube of 15.0 mm outer diameter and has variable color from red to blue with changing frequency high voltage. As increasing frequency in the gas discharge tube, the phenomena, that the electron temperature in the positive column increases and the radiation from atoms of higher upper state energy levels increases, exist The color have the locus from red (0.4972, 0.3128) to blue (0.2736, 0.2619) in CIE chromacity diagram with increasing frequency. The method of changing frequency has been shown to be suitable for the luminous color control.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1569-1572
• /
• 2007

A two-dimensional fluid simulation code has been developed in order to investigate discharge phenomena and to improve plasma luminous efficiency in a Hg flat fluorescent lamp (FFL) for an LCD backlight unit. In this study, the method of a two-dimensional fluid simulation for FFL is explained and the simulation results of Hg-Ar-Ne mixture gas are presented for the enhancement of the luminance efficiency. The effects of various parameters, such as driving voltage, frequency, and gas mixture ratio, are investigated. The luminance efficiency increased with increasing fraction of mercury but the increasing fraction of argon did not affect the efficiency much.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.1
• /
• pp.27-27
• /
• 2013

Development of bolometer array and camera at millimeter and submillimeter wavelengths plays an important role for detecting submillimeter galaxies (SMGs) which appear to be very bright at the submillimeter and millimeter wavelengths. These SMGs, luminous infrared galaxies detected at mm/submm wavelengths seem to be progenitors of present-day massive galaxies and account for their considerable contributions to the light from the early universe and their expected high star formation rates (SFRs) if there is a close link between the SMG phenomena and the star formation activities and the interstellar dust in galaxies is mainly heated by the star light. In this talk, we review assembly of SMGs compiled with observations using the bolometer arrays and cameras and investigate their spectral energy distribution fits including the data at other wavelengths which trace the photometric properties and the red-shift distribution of galaxies. We find that these bright SMGs significantly contribute to the cosmic star formation rate density at red-shifts of 2-3 (about 8 %) for the spatial distribution of these galaxies.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.05a
• /
• pp.57-60
• /
• 2005

This paper describes the experimental results of the pre-breakdown phenomena in $SF_6/CO_2$ mixtures under non-uniform electric fields caused by positive and negative lightning negative voltages. $SF_6/CO_2$ mixtures have an advantage of an environmental aspect and cost reduction, and safety aspects. In order to analyze the pre-breakdown processes in $SF_6/CO_2$ mixtures stressed by impulse voltages, pre-breakdown current and luminous signals were measured by a shunt and a photo-multiplier tube, respectively. Dielectric strengthes of $SF_6/CO_2$ mixtures were investigated. Additionally, characteristics of discharge channels were observed by high speed cameras and the physical properties were discussed. The pre-breakdown propagates with a stepwise process. The in to breakdown from the corona onset point in positive polarity was shorter than that in negative polarity. The time intervals of positive leaders are shorter than those of negative leaders, and the path of positive leader channel is zigzag.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.2
• /
• pp.128-133
• /
• 2008

This paper describes underwater discharge phenomena and breakdown characteristics in case that the standard lightning impulse voltage is injected to the needle and spherical electrodes installed in the hemisphere water tank. The objective of this work is to understand the basic features related to transient ground impedance against lightning surges. The discharge luminous images were observed and the dependence of breakdown voltage on the polarity of applied voltage and water resistivity were investigated. As a consequence, streamer corona is initiated at the tip of needle and spherical electrodes and is propagated toward grounded tank with stepwise extension. The breakdown voltage characteristics measured as a function of water resistivity showed V-shaped curves. Breakdown voltage and time curve of needle electrode is higher than that of spherical electrode.

• Journal of the Ergonomics Society of Korea
• /
• v.25 no.4
• /
• pp.9-22
• /
• 2006

1/f fluctuation characteristics can be seen in various natural phenomena, such as breezes, streams, candle flames and the luminous patterns of fireflies. It is said that the 1/f fluctuation are comfortable for human beings. And they are introduced into many industrial products, such as an air conditioner, music, lighting, etc. This study focused on verifying the effects of 1/f fluctuation sound on comfort sensibility. Stimulus were divided into three groups(Group 1, 2, 3) by sound generation methodology. Fluctuation patterns of group 1, 2 were given by three types of fluctuation, 1/f0, 1/f1, 1/f2, and its of group 3 were given by two types of pure tone, 1/f1. In order to verify the effects, we measured the physiological responses of the subjects such as EEG(Electroencephalogram), ERP(Event-Related Potential), and these physiological responses were compared with subjective assessments, free answers. Consequently, we found that factor which had an effect on comfort sensibility was cognitive factor(for stimulus) rather than 1/f fluctuation sound pattern.

• Polymer(Korea)
• /
• v.32 no.1
• /
• pp.56-62
• /
• 2008

Three types of network polyesters have been newly synthesized by a two-step condensation reaction by the various combination of several diols and diacids. When these polymer films were thermally treated at $240^{\circ}C$, they exhibited absorptions in a visible range despite the forbidden transition of carbonyl group. When excited at wavelengths above 330 nm, the polymers showed fluorescences in a wide visible range from blue to near yellow. These fluorescence phenomena are due to the formation of certain conjugated structures by the Knoevenagel type self-condensation under the high-temperature thermal treatment. These polymers showed significant difference in the thermal properties as a function of the degrees of chemical crosslinking. They also underwent photodegradation. Highly resolved, fluorescent image patterns were successfully obtained by the photodegradation of malonate group under a strong UV-light irradiation.