• 한국광학회지
• /
• 제32권1호
• /
• pp.15-21
• /
• 2021

본 논문에서는 LED 광원 모듈과 시준용 프레넬 렌즈를 이용하여 항공기 장애등 광학 시스템을 설계하였다. 설계된 광학계는 국토 교통부 항공기 경고등의 수직 양각 중심 광도 20,000 cd와 발산각 광도 규격 조건을 만족시키기 위해 프레넬 렌즈를 모듈별로 설계하였다. 또한 LED 광원 모듈과 프레넬 렌즈의 위치와 기울기를 조정하여 광학 시스템을 최적화하였으며, 이렇게 설계된 광학계의 배광 특성을 분석하고 비교하여 최적의 성능을 가진 항공기 경고등 광학계를 설계하였다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2002년도 학술대회논문집
• /
• pp.71-75
• /
• 2002

The prismatic luminaire named as a dome pendent is considered to save energy and improve visibility. This luminaire is using prismatic rome, and is designed to be used in commercial and industrial high-bay applications where quality light levels and energy savings are imperative. Although this kind of luminaire needs an accurate optic calculation process, the lumanires are manufactured without such a process. Therefore the purpose of this study is to develop a numerical model to accurately predict luminous intensity distribution of luminaire with prism.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 추계학술대회 논문집
• /
• pp.137-140
• /
• 2009

본 논문에서는 반사판을 이용하여 LED 보안등기구의 배광을 제어하였다. 먼저, 광학 설계를 용이하게 하기 위하여 집적화된 LED 모듈의 적정 배열을 도출한 후 반사판 설계를 하였으며, 광학 성능 예측 프로그램을 이용하여 결과물의 성능을 확인하였다.

• 조명전기설비학회논문지
• /
• 제28권8호
• /
• pp.24-31
• /
• 2014

This paper dealt with the LED optical illumination system design for the Masthead navigation light to replace halogen lamps. We made Fresnel lens satisfy luminous intensity distribution of "Convention on the International Regulation for Preventing Collisions at Sea(COLREG)". The optical system is designed by classifying three parts: light source, lens, and cut off plate. The source of light has been made to have the uniform horizontal and vertical light distribution by placing 6 LEDs at intervals of $54^{\circ}$, and as the cylindrical Fresnel lens, the lens has been designed to achieve the uniform horizontal and vertical light distribution in the range of plain light. Finally, the cover has been designed to block the light from the outside of plain light and ultimately met the standards for light distribution of navigation lights. In addition, the validity of design has been verified with manufacturing a trial product.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 춘계학술대회논문집
• /
• pp.123-128
• /
• 2005

This study purposes to increase the energy-saving effects by reducing excessive intensity of radiation of artificial lighting through analyzing daylight incident A photosensor sends amounts of detected luminous flux to digital control unit(DCU) as a signal and then, it can decide dimming ratios, received a proper dimming signal from DCU. Generally it Is effective to control artificial lighting with the different control ratio of each row by setting a photosensor as same numbers and rows as artificial lighting. However, it is ineffective to do in initial costs of systems aspect in offices. As a result of grasping the distribution of daylight previously, we can dim different dimming ratios to each row of artificial lighting by a single photosensor.

• Journal of Information Display
• /
• 제7권4호
• /
• pp.1-4
• /
• 2006

The optical performances of rounded prism films were investigated using a ray tracing technique. The angular distribution of the luminous intensity was obtained as functions of the prism pitch and the curvature of rounded apex and valley of prism arrays. The gain of the on-axis luminance decreased with decreasing curvature (increasing diameter) and pitch. The existence of the curved area on the prism film decreased the recycling efficiency of the prism film, i.e., the rays which would otherwise have been recycled through total internal reflections via the prism surfaces were refracted on the curved regions and redirected toward directions other than the on-axis direction. Quantitative correlation between the luminance gain and the curvature in addition to the prism pitch was obtained, which might serve as basic data for the optimization of prism films and the manufacturing processes.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2000년도 학술대회논문집
• /
• pp.123-128
• /
• 2000

공간의 효율적 조명시스템의 설계를 위해서는 그 공간의 물리적 조건들과 작업의 내용 등을 고려하여 표준적인 상황을 규정하고, 그 상황에서 가장 유용한 조명설계를 찾아내어 표준화해야 한다. 특히, 인텔리전트 빌딩에서는 OA도입으로 인한 VDT 작업환경, 취업인구의 고령화 등의 공간특성을 고려한 조명계획이 요구되며 이러한 조명계획을 구현할 수 있는 조명기구를 제작할 필요가 있다. 따라서 이 연구에서는 국내 인텔리전트 빌딩의 주요공간별 크기와 형태 및 특성을 조사하여 표준공간을 선정했고, 이를 반사판 설계에 반영하여 3가지 형태의 형광등기구를 설계, 분석하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.2196-2198
• /
• 2005

The luminous intensity distribution of a 1W high-power LED with a wide view angle should be concentrated to be used as a light source for an automotive reading lamp. In this paper, an optical lens made of PMMA is simulated by using an optical design software for that purpose. As the result, with the help of the devised lens, the reading light gives over 80 lx at the center of a target surface of radius of 0.2m located below 0.5m from the lamp, and a minimum of 20 lx at the perimeter of the target surface. Thus, a 1W high-power LED with an appropriate lens would suffice for an automotive reading lamp.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.3-7
• /
• 2006

Development of light sources has been constantly grown for a high efficacy and long life. And, the design of luminaires has ben developed for the reflection and refraction of light mechanism. But it has been not enough to study for the refraction of light mechanism. Therefore, this study aims to study for the refraction of light mechanism to using Monte-Carlo method and Ray-tracing method. In addition, the purpose of this study is to shu calculation process for development of 3 dimensional planar prism design algorithm in orer to use the results of photometric data that is able to obtain various luminous intensity distribution.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2003년도 학술대회논문집
• /
• pp.37-42
• /
• 2003

Development of light sources has been constantly grown after incandescent lamps had been invented by Thomas Edison. Recently, the eletrodeless lamp is introduced as a new light source of a high efficacy and long life. But, despite of such advantages, luminaires of electrodeless lamps are not widely used. It is necessary to develope the design of the luminaire together with light source development. In this paper, design algorithm of the luminaire that is adaptable to electrodeless lamp and use Genetic Algorithm as a optimization method to find luminous intensity distribution required is introduced.