• 한국조명전기설비학회지:조명전기설비
• /
• 제2권1호
• /
• pp.65-74
• /
• 1988

광표시전극의 저항이 작은 NESA glass($In_2O_3$ 또는 $SnO_2$)로 Electro Chromism Display 소자를 마들어 주입하밀도, 광학밀도 그리고 응답특성 등을 착소광현상으로 실험한 결과, $WO_3$와 Cell내에 광전기화학반응을 일으키기 쉬운 물질이 함유된 경우에는 착소광의 반복이 가능하였고 착광특성이 좋았다. 착소광전압이 높을수록 전극저항이 낮을수록 또 $WO_3$박막이 얇을수록 반응특성이 좋아졌다. 따라서 Electro Chromism(EC)의 현상을 분석한 결과 착소광소자로서 시계, 계기, 행선안내판 등에 쓰이는 실용가능성을 발견하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.447-450
• /
• 2003

In this paper, new luminescent material, 6,11-dihydoxy-5,12-naphtacene-dione Alq3 complex (Alq2-Ncd), 1,4-dihydoxy-5,8-naphtaquinone Alq3 complex(Alq2-Nq) was synthesized. And extended efforts had been made to obtain high-performance electroluminescent(EL) devices, since the first report of organic light-emitting diodes(OLEDS) based on tris-(8-hydroxyquinoline) aluminum(Alq3). We have performed investigate characterization of the materials. Current-voltage characteristics, luminance-voltage characteristics and luminous efficiency were measured by Flat Panel Display Analysis System(Model 200-AT) at room temperature. An intensive research is going on to improve the device efficiency using the hole injection layer, different electrodes, and etc. By using the hole injection layer, the charge-injection can be controlled and the stability could be improved. This study indicates not only the sterical effect but also some other effects would be responsible for the change of the emission wavelength.

• 한국전기전자재료학회논문지
• /
• 제23권8호
• /
• pp.627-631
• /
• 2010

ZnS:Mn yellow phosphors doped with Cu for white light emitting diodes were synthesized by solid state reaction method. The optical properties and structures of ZnS:Mn,Cu phosphors were investigated by x-ray diffraction, photoluminescence, and scanning electro microscopy. Photoluminescence excitation spectra originated from $Mn^{2+}$ were ranged from 450 nm to 500 nm. The yellow emission at around 580 nm was associated with $^4T_1{\rightarrow}^6A_1$ transition of $Mn^{2+}$ ions in ZnS:Mn,Cu phosphors. The highest photoluminescence intensity of the phosphors under 405 nm excitation was obtained at Cu concentration of 0.02 mol%. The enhanced photoluminescent intensity in the ZnS:Mn,Cu phosphors was interpreted by energy transfer from Cu to Mn.

• 전자공학회논문지B
• /
• 제30B권10호
• /
• pp.27-34
• /
• 1993

In this paper, a driver system is designed and implemented to achieve 4-level gray scale CH TFEL(Thin Film ElectroLuminescent) flat panel display. To implement the driver system, commercial EL driver IC chips are used to apply high voltage pulses to the EL panel and a high voltage switching circuit is designed for the EL driver IC. A new method of reducing storage delay time of transistor is proposed to obtain a reliable switching circuit. The controller for EL driver and switching circuit is also designed. The designed driving scheme applicable to EL display with 4-level gray scale is based on the linear characteristics of brightness vs. frequency of AC TFEL. By experiment, it has been shown that the brightness of AC TEFL display with the implemented driving system is controlled by the level of gray scale.

• 대한화학회지
• /
• 제49권2호
• /
• pp.201-207
• /
• 2005

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 춘계학술대회 논문집 전자세라믹스 센서 및 박막재료 반도체재료 일렉트렛트 및 응용기술
• /
• pp.18-21
• /
• 2000

진공 분위기에서 소성하여 ZnS 형광체를 제작하였다. ZnS 형광체는 소성온도가 $950^{\circ}C$ 이하인 경우 sphalerite 구조로 성장되었고, $1050^{\circ}C$ 이상인 경우 sphalerite 구조와 wurtize 구조의 공존이 확인되었다. Sphalerite 구조일 때 나타나는 460 nm를 중심으로 하는 발광 peak과 wurtize 구조일 때 나타나는 440 nm를 중심으로 하는 발광 peak은 ZnS 형광체 내에 형성된 $V_{Zn}$에 기인한다. Sphalerite 구조로 성장되었을 때 발광 스펙트럼에서 관측되는 528 nm를 중심으로 하는 발광 peak과 sphalerite와 wurtize 구조가 공존할 때 발광 스펙트럼에서 관측되는 515 nm를 중심으로 하는 발광 peak은 ZnS 형광체 내에 형성된 S의 결핍($V_s$) 준위로부터 가전자 띠로 복사 전이에 기인하는 것으로 설명된다.

• 한국분말재료학회지
• /
• 제19권6호
• /
• pp.442-445
• /
• 2012

The quantum dots (QD) have unique electrical and optical properties due to quantum dot confinement effect. The optical properties of QDs are decided by various synthesis conditions. In a prior QDs study, a study on the QDs size with synthesis condition such as synthesis time and temperature is being extensively researched. However, the research on QDs size with composition ratio has hitherto received scant attention. In order to evaluate the ratio dependence of CdSe crystal, synthesis ratio of Se precursor is changed from 16.7 mol%Se to 44 mol%Se. As the increasing Se ratio, the band gap was increased. This is caused by red shift of emission. We confirmed optical property of CdSe QDs with composition ratio.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1529-1530
• /
• 2007

The manganese co-doped $Ca_8Mg_1(SiO_4)_4Cl_2:Eu^{2+}$,$Mn^{2+}$ phosphor was synthesized by solid-state reaction and its photoluminescence characteristics were investigated. The synthesized phosphor show two emission spetrums: green band of 512nm and yellow band of 550nm. White light-emitting diodes (LEDs) were fabricated through combination of a 405nm-emitting InGaN chip and a synthesis phosphor in a single package. Under 20mA current, its CIE chromaticity coordinates are x=0.40 and y=0.45 and a color temperature of 4053K.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.1034-1037
• /
• 2002

In this study, we fabricated red organic electrolu-minescent device with a doping material (DCJTB), and The cell structure used ITO:indium tin oxide $[20{\Omega}]$/CuPc:Hole injection layer 20nm/NPB: Hole transfer layer 40nm/$Alq_3$ (host) + DCJTB(1% or 3%) (guest) Emitting layer 40nm/$Alq_3$ : Electron transfer layer 30nm/Al :Cathode layer 150nm. the luminescent layer consisted of a host material. 8-hydrozyquinoline aluminum $(Alq_3)$, and DCJTB dye as the dopant. a stable red emission (chromaticity coordinates : x=0.64, y=0.36) was obtained in this cell with the luminance range of $100-600cd/m^2$. we study the electrical and optical properties of devices.

• Journal of Korean Vacuum Science & Technology
• /
• 제6권1호
• /
• pp.51-54
• /
• 2002

Polymer EL devices of glass/ITO/PI/MEH-PPV/Al structure were fabricated using spin coating and the Ionized Cluster Beam deposition technique. PMDA-ODA type thin polyimide films which can be used as a impurity blocking layer of EL device were deposited by ICB. According to our previous results, the packing densities of polyimide films were subject to change and depend on their deposition condition. By inserting a Pl layer with various thickness and packing density, I-V characteristics and life time of the devices were investigated to determine the role of a interlayer. The blocking of impurity diffusion from ITO to luminescent layer were confirmed by XPS.