• Korean Journal of Materials Research
• /
• v.31 no.10
• /
• pp.582-585
• /
• 2021

Y₂O₃:Eu_x (x = 0.005, 0.01, 0.02, 0.03, 0.05, 0.1 mol) phosphors are synthesized with different concentrations of Eu³⁺ ions by solvothermal method. The crystal structure, surface and optical properties of the Eu doped Y₂O₃ phosphors are investigated using X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and photoluminescence (PL) and photoluminescence excitation (PLE) analyses. From X-ray diffraction (XRD) results, the crystal structure of the Eu doped Y₂O₃ phosphor is found to be cubic. The maximum emission spectra of the Eu doped Y₂O₃ phosphors are observed at 0.05 mol Eu³⁺ concentration. The photoluminescence of 615 nm in the Eu doped Y₂O₃ phosphors is associated with ⁵D₀ → ⁷F₂ transition of Eu³⁺ ions. The decrease in emission intensity of 0.1 mol Eu doped Y₂O₃ is interpreted by concentration quenching. The International Commission on Illumination (CIE) coordinates of 0.05 mol Eu doped Y₂O₃ phosphor are X = 0.6547, Y = 0.3374.

• Journal of Powder Materials
• /
• v.29 no.5
• /
• pp.370-375
• /
• 2022

Cu-doped ZnSe quantum dots were successfully synthesized in an aqueous solution using an internal doping method. The effects of ligand type, CuSe synthesis temperature, and heating time on Cu-doped ZnSe synthesis were systematically investigated. Of MPA, GSH, TGA, and NAC used as ligands, MPA was the optimal ligand as determined by PL spectrum analysis. In addition, the emission wavelength was found to depend on the synthesis temperature of the internal doping core of CuSe. As the temperature increased, the doping of Cu²⁺ was enhanced, and the emission wavelength band was redshifted; accordingly, the emission peaks moved from blue to green (up to 550 nm). Thus, the synthesis of Cu:ZnSe using internal doping in aqueous solutions is a potential method for ecomanufacturing of color-tuned ZnSe quantum dots for display applications.

• Journal of radiological science and technology
• /
• v.46 no.6
• /
• pp.501-508
• /
• 2023

This study used a adult absorption dose phantom (CIRS model 701-G, USA) made of human equivalent material and the vascular imaging equipment Allura Xper FD 20 (Philips, Netherlands). Optically stimulated luminescent dosimeters (OSLD) were inserted into the anatomical positions corresponding to each organ, and the exposure dose was measured. Dose area product (DAP) and air kerma (AK) measured by the dose meter in the equipment were compared. Continuous imaging was performed at two angles for a total of 20 minutes, with a frame per seconds of 3.75 and 7.5 fps and an FOV of 42 cm, 37 cm, and 31 cm, respectively, under the conditions of fluoflavor I, II, and III, each selected for 5 repetitions. This study was found that selecting a lower fps was the most effective way to reduce patient exposure dose, and adjusting the fluoflavor was a good alternative method for reducing patient exposure dose at high fps. Therefore the method of condition change with the greatest dose reduction effect is to set the minimum FPS and can reduce patient exposure dose according to geometric conditions and fluoflavor characteristics.

• Journal of fish pathology
• /
• v.20 no.3
• /
• pp.237-247
• /
• 2007

In 1999, Vibrio harveyi infection occurred among cultured marine finfishes including olive flounder (Paralichthys olivaceus), black rockfish (Sebastes schlegeli), and turbot (Scophtalmus maximus) in the province of Gyeongsang, Korea. We examined the various microbiological characteristics of this V. harveyi strains. V. harveyi was grown well in the 3% NaCl at 30℃. The swarming activity appeared to be an one of the characteristic properties of the V. harveyi was the highest in the 2% NaCl concentration at TSA medium. These cells were elongated and had the several lateral flagella which is not waved and shorter than polar flagella. It was not luminescent in the all isolated strains. Whole cell of the V. harveyi had a major protein of 50 kDa and presented various band around of 40 kDa in strains.

• Journal of the Korean Society of Costume
• /
• v.58 no.4
• /
• pp.113-127
• /
• 2008

Artificial lights have effected the changes of art and fashion concepts as well as human life since the invention of electric light bulb in late 19th century. Artist and designer have had more interested in these artificial lights as the development of digital technology and the change of millennium and they have tried to apply the lights into their works. The purpose of this study is to analyze the aesthetic characteristics of contemporary fashion design using artificial light as a medium. Artificial light for fashion design means the light using luminescent material like phosphorescent and fluorescent materials or in combination with electroluminescent digital technology or the light that can be perceived as images when light projects from media using a light projector or other digital equipment. Fashion design using this light type can change colors or form temporarily and it can playa role as a gadget for hm or as equipment to provide information much as a computer monitor does. And designer can create virtual patterns on the surface of clothes, or virtual fashion like a 3-dimensional holography in empty space. In these fashion designs, the virtual image of light is substituted for physical formative elements in fashion, and the viewer can experience an ambiguity between reality and virtuality. The results of the study were as follow; The formative characteristics of those fashion designs were identified as visibility, indeterminacy, integration and virtuality. And they reflected the internal meanings; the persue of protection and safety, the search for experiment and innovation, the will for interaction and communication and the desire for the deviation and fun.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.10
• /
• pp.31-36
• /
• 1999

The $CaSiN_2:Eu$ and $CaSiN_2:Tb$ phosphors were synthesized and analyzed to develop new nitride compound phosphors. $Ca_3N_2$, $Si_3N_4$ and $EuF_3$(or $TbF_3$) powders were mixed, cold-pressed, and sintered to synthesize $CaSiN_2:Eu$ and $CaSiN_2:Tb$ phosphors. Photoluminescence(PL) and electroluminescence(EL) characteristics of the synthesized phosphors were measured and found to be similar to general emission spectra of 뗘 and Tb ion, respecticely. Threshold voltage($V_{th)$) and luminance of the $CaSiN_2:Eu$ TFEL device fabricated by sputtering were 90 V and 1.62 $cd/m^2$ at 280 V, respectively. The charge-voltage(Q-V) and transferred charge-phosphor field($Q_t-F_p$) characteristics of the TFEL devices were also measured.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.12
• /
• pp.31-36
• /
• 1999

The $Mg._5Zn._5SiN_2:Tb$ and $Mg._5Zn._5SiN_2:Eu$ materials were synthesized and studied to develop new phosphors for thin-film electroluminescent device application. Photoluminescence and cathodoluminescence characteristics of the synthesized phosphors were similar to general emission spectra of Eu, Tb ion, respectively. The CIE color coordinates, threshold voltage and luminance of the $Mg._8Zn._2SiN_2:Eu$ thin-film electroluminescent device fabricated by electron-beam deposition system were x=0.47, y=0.46, 47V, and 23.5 cd/$cm^2$ at 80V, respectively. The capacitance-voltage and charge-voltage characteristics of the thin film electroluminescent devices were also measured.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.307-310
• /
• 1999

Using Se as a photoconductive element and ZnS as a luminescent element, a Se/ZnS thin film device for light amplifier applications was fabricated and its characteristics were investigated. The Se/ZnS thin film light amplifier was fabricated by evaporating the ZnS thin film on an ITO(Indium Tin Oxide) glass and the Se thin film on the ZnS thin film in sequence. The results of the characteristics investigation are summarized as follows: (1) When the frequency of an excitation voltage was increased, both the brightness response and the brightness saturation of the Se/ZnS thin film light amplifier began to start at a higher light input. (2) The gain of the Se/ZnS thin film light amplifier was dependent upon the amplitude and the frequency of the excitation voltage as well as an external light input. (3) When the Se/ZnS thin film light amplifier was excited by a direct current of a constant voltage, the frequency of the output brightness was\\`equal to the frequency of the input light applied. When the light amplifier was excited by a sinusoidal voltage of 60 Hz, the frequency of the output brightness was 120 Hz.

• Journal of radiological science and technology
• /
• v.16 no.1
• /
• pp.41-55
• /
• 1993

Recently, various screen film system have been introduced in diagnostic radiology. There are two kinds of screen film system : blue emitting $CaWO_4$ screen has been largely used in these days. However, it tends to be changed to use green emitting $Gd_2O_2S$ : Tb screen. In this study, photographic characteristics of $CaWO_4$ and $Gd_2O_2S$ : Tb screen were investigated with luminescence, spectroscopy. The morphology of $CaWO_4$ and $Gd_2O_2S$ : Tb were also observed by using scanning electron microscope. The result obtained were as follows : 1. There was small difference in the thickness of phosphor layers for the front and back screen of blue emitting system, but little difference in those of green emitting system. 2. There was no difference in the size of phosphor particles between the front and back screen for each screen. However, the particle size was different for the various kinds of screens. 3. The shape of phosphor particle was round with many faces for all the screens. 4. In the exposure of X-ray with the same intensity, luminescent intensity of a green emitting system was $6{\sim}7$ times larger than that of a blue emitting system. 5. The thickness of phosphor layers does not affect on the sensitivity of the screens exposed by X-ray.

• Environmental Analysis Health and Toxicology
• /
• v.11 no.1_2
• /
• pp.31-39
• /
• 1996

Leachate from municipal solid waste (MSW) landfill, effluent from leachate treatment plant, and ground water sample from a monitoring well near landfill site were tested for an acute toxicity. Microtox toxicity test was used for testing the acute toxicity of leachate and other samples. EC$_{50}$ values which a concentration of pollutant for reducing 50% light output from luminescent bacteria, Photobacterium phosphoreum were determined to assess the toxicity of pollutants as well as the relative toxicity. In addition, characteristics of leachate were studied and compared to those of phenol and pentachlorophenol (PCP) which are typical aquatic toxic pollutants. For leachate, EC$_{50}$ for 30 min incubation was 10.8%, while for phenol and PCP, 46 ppm and 1.2 ppm, respectively. the relative toxicity of treated leachate by in situ aeration with activated sludge was reduced to more than 75% of toxicity of the untreated leachate. Microtox toxicity test was failed to figure out EC$_{50}$ values for groundwater from a monitoring well since the relative toxicity of the unconcentrated sample was too low to estimate EC$_{50}$. Addition of activated carbon to leachate was reduced the relative toxicity. The reduction Pattern of the relative toxicity of leachate by mechanical aeration was similar to that of PCP, but different from that of phenol. These findings suggest that the toxicity of leachate may come from PCP-like toxic compounds rather than phenol-like one. In conclusion, the process of aeration with activated sludge might be very important to reduce the environmental toxicity of leachate. And Microtox test could be a reasonable bioassay for screening and monitoring the environmental toxicity of leachate from municipal solid waste landfill as well as for determining the reduction efficiency of the leachate toxicity by various treatment processes in leachate treatment plant.