• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.2
• /
• pp.78-81
• /
• 2020

Quantum dot efficiency was increased to evaluate reliability and optical characteristics using incidental materials. Quantum dot was manufactured by wrapping a sandwich type quantum layer using a product with a barrier property to prevent water and oxygen because it is vulnerable to oxygen and moisture. We used the three quantum dot films consisting of quantum dot only and quantum dot products consisting of film and barrier film combined with PET in the quantum dot product to evaluate the change over 650 hours under high temperature and high humidity conditions at 60℃ and 90 % humidity. As a result, the quantum dot product with Barrier Film has lowered luminance by 8 %, CIE x by 2 % and CIE y by 8 %. Quantum dot products exposed to moisture and oxygen were oxidized and measured low before measurement.

• Korean Journal of Materials Research
• /
• v.24 no.12
• /
• pp.710-714
• /
• 2014

The effect of titanium dioxide ($TiO_2$) on the properties of color conversion glasses was examined for glasses based on $BaO-ZnO-B_2O_3-SiO_2$. One glass sample, containing 25 mol% of each component, was used as a reference; the other three glass samples contained 1, 3, and 5 mol% $TiO_2$, respectively. The four color conversion glass samples were prepared by sintering a mixture of glass frits and a $YAG:Ce^+$ phosphor. The characteristics of the color conversion glass samples, such as luminous efficacy, luminance, CIE (Commission International de I'Eclairage) chromaticity, CCT (Correlated Color Temperature), and CRI (Color Rendering Index) were analyzed according to the PL spectrum. The refractive index of the glass samples was found to increase with the titanium dioxide content. In conclusion, luminous efficacy of color conversion glasses increased as the content of $TiO_2$ was raised in the glass matrix.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.7
• /
• pp.1708-1714
• /
• 2010

In this paper, the full color LED billboard or a general quality improvement methods of quality gamma correction, brightness, and brightness adjustment, etc., regardless of the overall color of images uniformly bright or dark have been taken care of. The video itself, but simply expressed as a uniform brightness of a certain size, how to adjust the brightness of input video signal does not reflect the characteristics of the entire screen with just a lighter or darker line is only feeling was brought. So, unlike conventional video transmission system with new LED display technology in the histogram analysis of image data is input by the input image data by determining the luminance values of the attributes are reflected, as appropriate based on the histogram of the distribution of brightness values By controlling the LED display is expressed in the uniform image can improve the brightness control, histogram distribution of the image as full color billboards driven processing technology is proposed.

• Fashion & Textile Research Journal
• /
• v.19 no.5
• /
• pp.653-660
• /
• 2017

Recently, consumers' evaluation and purchase of online design has been increasing due to the popularization of designing through personal computers, but there has not been enough studies on consumers' brain wave responses depending on the change of PC monitor's color. Therefore, this study investigated how brain waves changed when different background colors with gray patterns were presented through PC monitors. Six background colors with same tone of slightly low saturation were selected, including ivory, yellow, pink, green, blue and pure white as a base color. The brightness and characteristics of color used were analyzed using the luminance meter and color scales. Brain wave was measured by EEG measurement equipment. Brain wave measurement was carried out with 9 subjects at 6 points: F3, F4, T3, T4, O1, and O2. Stimuli were shown for 15 seconds each and black screens were displayed for 15 seconds between each stimulus. As results, the brain waves at O1 responded sensitively by different background colors, followed by F4 and T4. Brain index such as 'RT', 'RA', 'RG', 'RSA', and 'RAHB' showed significant differences depending on the background color at O1, whereas 'RST' differed at F4. Yellow and blue backgrounds pair was the only stimuli that showed significant differences in six brain indices mentioned. Yellow background had higher value of 'RG' at O1 and higher 'RST' at F4, indicating yellow background enhanced concentration. Blue background activated 'RT', 'RA', 'RSA', 'RAHB' at O1, meaning blue background induced calm and stable state.

• Journal of Broadcast Engineering
• /
• v.17 no.5
• /
• pp.876-890
• /
• 2012

In this paper, we investigated the performances of the distributed video codec with adaptive Gray code to apply for frame-difference signal. That is, the best cases and the worst cases were analyzed and compared by considering the statistical characteristics of the frame difference signal in view of the Gray code allocation. Through computer simulations, if 9-bit data for frame difference signal is generated for luminance signal with 8-bit definition and so n-bit is allocated to the quantized coefficient, we were able to find the best method to reduce the virtual channel noise by adding $256+2^{9-n-1}$ to the frame difference signal. Through computer simulation with test video sequences, it was shown that the performance difference between the best cases and the worst cases is larger than about 1.5dB at same rate. It is expected that the results in this paper are applicable for the transform-domain scheme as well as the pixel-domain scheme.

• Journal of the Korean Society of Radiology
• /
• v.8 no.7
• /
• pp.435-441
• /
• 2014

This paper suggests techniques to enhance coding time which is a problem in traditional fractal compression and to improve fidelity of reconstructed images by determining fractal coefficient through adaptive selection of block approximation formula. First, to reduce coding time, we construct a linear list of domain blocks of which characteristics is given by their luminance and variance and then we control block searching time according to the first permissible threshold value. Next, when employing three-level block partition, if a range block of minimum partition level cannot find a domain block which has a satisfying approximation error, There applied to 24-bpp color image compression and image techniques. The result did not occur a loss in the image quality of the image when using the encoding method, such as almost to the color in the RGB image compression rate and image quality, such as gray-level images and showed good.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.9
• /
• pp.110-117
• /
• 2016

Applying the contrast enhancement algorithms to luminance values of color images is a widely used approach to enhance the contrast of color images. The results obtained by this approach have reduced saturation compared with that of the original images in spite of contrast enhancement without color degradation. Applying the contrast enhancement algorithm to each channel of color images is another approach for the contrast enhancement of color images. This method produces improved images in terms of contrast and saturation while the hue of original images is changed. In this paper, main cause of color degradation is analyzed and then solving the problem based on the analysis. The channel adaptive contrast enhancement method considering characteristics of each channel is also proposed to deal with color degradation. As a result, the proposed method enhances the contrast and saturation simultaneously without color degradation. Experimental results show that the proposed method outperforms the conventional methods not only on subjective evaluation but on objective criteria.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.3
• /
• pp.213-219
• /
• 2017

Objective: The present study identified the minimum legible text size by an experiment for eight combinations of background and text colors, which will be used in designing visual information on group-view display (GVD). Background: Information on minimum legible text size is needed to design the visual information presented on GVD in a radioactive waste control room. Method: The experiment was conducted for 22 male participants (age: mean = 37, SD = 6.7; visual acuity: over 0.8) who were recruited by considering demographic characteristics of current control room operators. Eight combinations of background and text colors were considered and the minimum legible text size was determined for each combination by applying the method of limits, one of psychophysical methods. Results: The minimum legible text size was significantly different in accordance with the combination of background and text colors. Statistical analysis results showed that luminance contrast and color contrast between background and text influenced the minimum legible text sizes. Conclusion: This study concluded that the minimum legible text size is 8 minute of arc for various combinations of background and text colors. Application: The minimum legible text size identified in the present study can be utilized in designing visual information on GVD at the main control room in a radioactive waste facility.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.1
• /
• pp.50-55
• /
• 2014

It was firstly found in 1st group element. Recently, it has been reported on the improvement of efficiency of the OLEDs by introducing thin layer of some carbonate materials of alkali metal. In order to improve the efficiency of OLEDs which is one of the next generation displays, we have studied the electrical characteristics of the device depending on the thickness ratio of the hole-injection layer to the electron-injection layer. Teflon-AF was used as the hole-injection material, and alkali-metal carbonates of $Li_2CO_3$ were used as the electron-injection materials. To obtain a proper thickness ratio, we manufactured. Four types of devices with the thickness ratio of HIL to EIL were made to be 1 : 4, 2 : 3, 3 : 2, and 4 : 1. The results of electrical and optical properties showed that the device with the thickness ratio of 4 : 1 is the most excellent result. In addition, to prepare a four-layer device by inserting the ${\alpha}$-NPD is a hole transporting material was compared with three-layer element. As a result, the maximum luminance, the maximum luminous efficiency, maximum external quantum efficiency of about 124 [%], 164 [%], 106 [%] improve was confirmed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.1C
• /
• pp.64-71
• /
• 2003

In this paper, we proposed an algorithm that shorten coding time maintaining image quality in JPEG2000, which is the standard, of still image compression. This method encodes only the bit plane selected as appropriate truncation point for output bitstream, obtained from estimation of frequency distribution for whole image. Wavelet characterized by multi-resolution has vertical, horizontal, and diagonal frequency components for each resolution. The frequency interrelation addressed above is maintained thorough whole level of resolution and represents the unique frequency characteristics for input image. Thus, using the frequency relation at highest level, we can pick the truncation point for the compression time decrease by estimating code bits at encoding each code block. Also, we reduced the encoding time using simply down sampling instead of low-pass filtering at low-levels which are not encoded in color component of lower energy than luminance component. From the proposed algorithm, we can reduce about 15~36% of encoding time maintaining PSNR 30$\pm$0.5㏈.