• 공업화학
• /
• 제29권4호
• /
• pp.405-412
• /
• 2018

알칸디올로부터 유래된 주사슬의 탄소수가 6, 9, 11인 bis[3-(dialkyloxylphosphorothionyl)thio-2-methylpropanyloxy]alkane (BAPA)를 합성하였으며, 이를 zinc dialkyl dithiophosphates (ZDDP)와 비교하여 마모억제성능을 살펴보았다. 탄소 주사슬의 길이에 따른 BAPA의 내마모성능을 확인하기 위하여 4-ball 시험을 하였다. 기유무게의 1% 농도로 첨가제를 넣고 WSD (wear scar diameter)를 측정하였고, 각 0.472, 0.459, 0.480 mm로 나타났다. 또한 BAPA 화합물 중 bis[methacryloyloxy]nonane (BMOO9)의 곁사슬인 dialkyl dithiophosphoric acid (DDP)의 탄소수를 4, 8, 12로 변화시켜 합성하여, 4-ball 시험을 하였다. 그 결과로 WSD의 값은 각각 0.537, 0.459, 0.531 mm로 측정되었다. 곁사슬이 짧으면 필름이 얇게 형성되고, 길면 필름형성을 방해하여 탄소수가 8개일 때의 값이 제일 좋게 나타났다. ZDDP의 경우 동일한 조건에서 WSD의 값이 0.563 mm로 측정되었고, 합성한 BAPA의 화합물이 마모억제용 첨가제로 더 우수한 성능을 갖는다는 것을 확인하였다.

• 한국재료학회지
• /
• 제16권3호
• /
• pp.188-192
• /
• 2006

The microstructures and mechanical properties of continuously porous $SiC-Si_3N_4$composites fabricated by multi-pass extrusion were investigated at different Si levels added. Si-powder with different weight percentages (0%, 5%, 10%, 15%, 20%) was added to the SiC powder to make the raw mixture powders, with $6wt%Y_2O_3-2wt%Al_2O_3$ as sintering additives, carbon ($10-15{\mu}m$) as a pore-forming agent, ethylene vinyl acetate as a binder and stearic acid ($CH_3(CH_2)_{16}COOH$) as a lubricant. In the continuously porous $SiC-Si_3N_4$ composites, $Si_3N_4$ whiskers like the hairs of nostrils were frequently observed on the wall of the pores. In this study, the morphology of the $Si_3N_4$ whiskers was investigated with the silicon addition content. In the composites containing of 10 wt% Si, a large number of $Si_3N_4$ whiskers was found at the continuous pore regions. In the sample to which 15 wt% Si powder was added, maximum values of about 101 MPa bending strength and 57.5% relative density were obtained.

• Tribology and Lubricants
• /
• 제33권6호
• /
• pp.245-250
• /
• 2017

In this work, we examine pure water and water with nanoparticles to investigate water lubrication characteristics and the effect of nanoparticles as lubricant additives for different substrates. We test carbon-based coatings and metals such as high-speed steel and stainless steel in pure deionized (DI) water and DI water with nanoparticles. We investigate water lubrication characteristics and the effect of nanoparticles based on the friction coefficient and wear rate for different substrates. The investigation reveals that nanoparticles enhance the friction and wear properties of high-speed steel and stainless steel. The friction coefficient and wear rate of both high-speed steel and stainless steel decreases in DI water with nanoparticles compared with the results in pure DI water. The presence of nanoparticles in water show good lubricating effect at the contact area for both high-speed steel and stainless steel. However, for carbon-based coatings, nanoparticles do not improve friction and wear properties. Rather, the friction coefficient and wear rate increases with an increase in the concentration of nanoparticles in case of water lubrication. Because carbon-based coatings already have good tribological properties in a water environment, nanoparticles in water do not contribute toward improving the friction and wear properties of carbon-based coatings.

• 한국환경보건학회지
• /
• 제26권2호
• /
• pp.97-107
• /
• 2000

PCBs [Polychlorinated biphenyls] are halogenated aromatic compounds with the empirical formula C12H10-nCln(n=1~10), and are a mixture of possible 209 different chlorinated congeners. PCBs were widely used as dielectric fluids for capacitors, transformers, plasticizers, lubricant inks, and paint additives. once released into the environment, PCBs persist for years because they are so resistant to degradation. In addition to their high degree of lipophilicity. In 1970s, the worldwide production of PCBs seem to be still in use. The environmental load of PCBs was prohibited since 1983 in Korea. In spite of these actions, many PCBs seem to be still in use. The environmental load of PCBs will continue to be recycled through air, land, water, and the biosphere for decades to come. This study was conducted to measure the concentrations of PCBs I the serum samples of 112 women by GC/MSD(Hewlett Packard 5897 Gas Chromatography-Mass Chromatography Detector) and CG/ECD(Hewlett Packard 5890 series-II gas chromatography-Electron capture detector, U.S.A). The main results of this study were as follows; The mean and standard deviation of serum PCBs were 3.613, 0.759 ppb, respectively and median of it was 3.828 ppb. The correlation coefficients of the concentrations of 13 PCB congeners ranged from 0.7913 to 0..9985 and were significantly correlated between each items(p=0.0001). The PCB concentrations were positively associated with age(simple linear regression; R2=0.86, =0.08023, p<0.001) and with total lipids in serums(simple linear regression; R=0.7058, =0.00486, p<0.001). The age adjusted model (Y=$\beta$0+$\beta$1age+$\beta$2X) was applied for possible predictors of PCBs levels in serum. For BMI(Body Mass Index), major residential area, and fish, meat, and dairy consumption, there was no association with PCBs levels, Also there was negative association for the number of pregnancy and lactation period with PCBs levels.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 추계학술대회 논문집
• /
• pp.373-378
• /
• 2002

Metal matrix composites have a great interest in recent years because high specific strength, high specific stiffness characteristics, and application ranges of the composites are extend to variety industry. In this paper, an investigation was performed on the plane strain fracture toughness and slinding wear properties of AC4CH alloy(Al-Si-Mg line) reinforced with 20wt% aluminum borate whisker expect one, which contained a inorganic binder($TiO_2$). the binder led to the formation of strengthen the whisker each other. The test of fracture toughness was using CT(half size) specimen of thickness 12.5mm, width 25mm. and test of slinding wear of using tribo a pin-on-disk machine and lubricant is used without paraffine 8.2CST at room temperature. As results, Fracture toughness $K_{IC}$ is $8.7MPa-m^{05}$ for ABOw/AC4CH, $9.28MPa-m^{05}$ for ABOw/AC4CH added $TiO_2$. but AC4CH alloy was violated the critical stipulated by ASTM standard for valid measurement of $K_{IC}$. In case of, it was performed $J_{IC}$ test instead of $K_{IC}$ based on ASTM E 1820.

• 한국기계가공학회지
• /
• 제21권5호
• /
• pp.98-104
• /
• 2022

When processing parts, the cutting oil can improve the cooling performance of the workpiece and tool to increase the precision of the workpiece or extend the life of the tool and facilitate chip extraction. Since such cutting oil has a harmful effect on the environment and the human body due to additives such as sulfur, research on a minimum lubrication supply method using an eco-friendly oil is recently underway. The minimum lubrication supply method minimizes the amount of cutting oil used during processing and processes it, which can reduce the amount of cutting oil used, but has a problem in that cooling performance efficiency is poor. Therefore, this study conducted a study on mist cooling of lubricants to reduce the amount of cutting oil used and maximize the cooling effect of processing heat generated during tapping processing. Spray pressure, processing speed, direction, and lubricant spray amount, which are considered to have an effect on cooling performance, were set as process conditions, and the effect on temperature was analyzed by performing an experiment using the box benquin method among experiments were analyzed. Through the experimental analysis results, the optimal conditions for mist and processing that maximize the cooling effect were derived, and the validity of the results derived through additional experiments was verified. In the case of processing by applying the mist lubrication method verified through this study, it is considered that high-precision processing is possible by improving the cooling effect.

• Tribology and Lubricants
• /
• 제39권3호
• /
• pp.87-93
• /
• 2023

Nanofluids are dispersions of particles smaller than 100 nm (nanoparticles) in base fluids. They exhibit high thermal conductivity and are mainly applied in cooling applications. Nanolubricants use nanoparticles in base oils as lubricant additives, and have recently started gathering increased attention owing to their potential to improve the tribological and thermal performances of various machinery. Nanolubricants reduce friction and wear, mainly by the action of nanoparticles; however, only a few studies have considered the rheological properties of lubricants. In this study, we adopt a parallel slider bearing model that does not generate geometrical wedge effects, and conduct thermohydrodynamic (THD) analyses to evaluate the effect of higher thermal conductivity and viscosity, which are the main rheological properties of nanolubricants, on the lubrication performances. We use a commercial computational fluid dynamics code, FLUENT, to numerically analyze the continuity, Navier-Stokes, energy equations with temperature-viscosity-density relations, and thermal conductivity and viscosity models of the nanolubricant. The results show the temperature and pressure distributions, load-carrying capacity (LCC), and friction force for three film-temperature boundary conditions (FTBCs). The effects of the higher thermal conductivity and viscosity of the nanolubricant on the LCC and friction force differ significantly, according to the FTBC. The thermal conductivity increases with temperature, improving the cooling performance, reducing LCC, and slightly increasing the friction. The increase in viscosity increases both the LCC and friction. The analysis method in this study can be applied to develop nanolubricants that can improve the tribological and cooling performances of various equipment; however, additional research is required on this topic.

• 공업화학
• /
• 제19권5호
• /
• pp.574-581
• /
• 2008

폐 자동차 배기가스 정화용 촉매를 휘발성 유기화합물(VOCs) 처리 시스템에 재활용하기 위해 운전조건이 서로 다른 폐 자동차 촉매를 이용하여 촉매의 최적 재생 조건 및 VOCs 연소활성특성을 조사하였다. 폐 촉매의 최적 재생 조건을 찾기 위해 산세기가 서로 다른 5종류(질산($HNO_3$), 황산($H_2SO_4$), 옥살산($C_2H_2O_4$), 구연산($C_6H_8O_7$), 인산($H_3PO_4$))의 산을 이용하여 재생 처리하였으며, 질소 흡착등온선, XRD와 ICP를 이용하여 폐 촉매와 재생 처리한 촉매의 물리화학적 특성을 비교하였다. 폐 자동차 촉매의 피독물질과 백금족 금속(PGMs)의 상대적 함유율은 촉매의 위치에 따라 달랐으며, 주요 피독물질은 윤활유 오일첨가제와 엔진 및 배출가스 파이프에 함유된 물질이었다. 그리고 폐 자동차 촉매는 산수용액 전처리 후 백금족 금속의 상대적 함유율, BET 비표면적 및 평균기공크기가 폐 촉매에 비해 증가하였다. 폐 촉매와 재생 처리한 촉매의 VOCs 연소활성 실험 결과 폐 촉매가 VOCs 처리에 충분히 이용될 수 있다는 가능성을 보여 주었으며, $HNO_3$와 $C_2H_2O_4$ 전처리를 한 촉매의 반응활성이 가장 우수하였다. 그리고 전처리한 촉매의 반응활성은 산처리로 인한 피독 오염물질의 제거율 및 조직 특성 변화 보다는 백금족 금속인 백금(Pt)의 함유율에 더 큰 영향을 받았다.