• 대한소아치과학회지
• /
• 제50권2호
• /
• pp.205-216
• /
• 2023

이 연구의 목적은 3D 프린팅 레진의 연마 방법에 따른 색조 안정성과 표면 조도를 시간에 따라 비교하는 것이다. 3D 프린터와 TC-80DP 레진을 이용하여 3D 프린팅 레진 시편을 제작하였고, 각 시편은 연마하지 않은 군, Enhance^®군, Sof-Lex^TM군으로 분류되었다. 각 군은 연마 직후 기준점을 측정하고, 다시 인공 타액과 오렌지 주스에 나누어 침전시킨 뒤, 침전 1, 7, 30, 60일에 CIE L^*a^*b^* 값의 색차(ΔE^*)와 각 시점의 표면 조도가 측정되었다. 연구 결과, 60일 침전 후 인공 타액에서는 육안으로 확인 가능한 정도의 색조 변화는 일어나지 않았으나 오렌지 주스에서는 육안으로 확인 가능한 색조 변화가 나타났고, 용액에 따른 차이는 유의미했다. 표면 조도는 Sof-Lex^TM군에서만 오렌지 주스가 인공 타액보다 유의하게 높았다. 연마 방법에 따른 색조 변화의 차이는 없었으나 표면 조도는 Sof-Lex^TM군이 연마하지 않은 군과 Enhance^®군보다 유의하게 낮았으며, 모든 군에서 치태 침착 임계 조도보다는 높았지만, 임상적으로 허용 가능한 정도였다. 이번 연구 결과, 유전치 전장관 수복을 위해 영구 수복용 3D 프린팅 레진 사용 시 착색제 섭취에 유의해야 하며, SofLex^TM를 이용하여 연마하는 것이 권장된다.

• 대한치과교정학회지
• /
• 제27권2호
• /
• pp.327-334
• /
• 1997

광중합형 글래스 아이오노머 시멘트(Fuji Ortho $LS^{(R)}$)와 화학중합형 레진 시멘트(Mono $Lok2^{(R)}$)을 선택하여 사람의 소구치를 대상으로 법랑질을 퍼미스 및 10% 폴리아크릴산, 38%인산으로 표면처리한 후 금속 및 프라스틱 브라켓을 부착하고 섭씨 $37^{\circ}C$의 생리 식염수에 24시간, 48시간 경과 시키고 만능강도시험기를 이용하여 전단결합강도를 측정하고 비교함으로써 교정용 접착제로서 광중합형 글래스 아이오노머 시멘트가 임상적 적용 가능성이 있는지 여부를 규명하고자 시행하여 다음과 같은 결론을 얻었다. 1. 퍼미스로 법랑질을 표면처리한 광중합형 글래스 아이오노머 시멘트군의 전단결합강도는 화학중합형 레진군의 결합 강도보다 유의성 있게 낮았다(P<0.01). 2. 10% 폴리아크릴산으로 법랑질을 표면처리한 광중합형 글래스 아이오노머 시멘트군의 전단 결합강도는 화학중합형 레진군보다 유의성이 낮았다(PC0.01). 3. 10% 폴리아크릴산으로 법랑질을 표면처리한 광중합형 글래스 아이오노머 시멘트군의 전단결합강도는 피미스로 법랑질을 표면처리한 광중합형 글래스 아이오노머 시멘트군보다 약간 높았으나 통계적으로 유의성이 없었다(P<0.05). 4. 메탈과 플라스틱군의 법랑질 표면처리에 관계없이 통계적으로 유의성이 없었다(P<0.05). 이상의 결과를 종합해볼 때 비록 광중합형 글래스 아이오노머 시멘트가 화학중합형 레진 시멘트보다 결합강도는 낮지만 이의 임상적 적용은 가능할 것으로 사료된다.

• 한국재료학회지
• /
• 제4권1호
• /
• pp.31-36
• /
• 1994

Mn-Zn ferrite를 가공하여 VCR헤드의 제조과정에서 비자성체 gap용 $SiO_{2}$증착층과 유리와의 접합시 유리내에 기포 형태의 결함이 발생하는 경우가 있다. 기판의 조도나 $SiO_{2}$의 증착속도의 영향을 분석한 결과, 기포의 생성원인이 $SiO_{2}$ 증착층과 접합유리의 융착시 계면에 존재하는 요철의 불완전한 충진에 의한 것으로 나타났다. 따라서 이러한 기포생성을 억제시키는 위해서는 기판을 최대한 경면 연마시켜 표면조도를 작게하고 $SiO_{2}$증착속도를 조절함으로써 $SiO_{2}$증착층의 표면조도를 작게하여 유리 융착시 계변의 요철 크기를 작게해야 한다. 기판을 0.05$\mu\textrm{m}$알루미나 분말로 경면연마시키고, 10% Osub 2/분압을 갖는 Ar plasma상태하로 조절된 증착속도로 즈악된 $SiO_{2}$증착층과 접합유리의 융착시 기포가 전혀 발생치 않았다.

• Journal of Welding and Joining
• /
• 제19권1호
• /
• pp.33-39
• /
• 2001

The welding quality by Gas Tungsten Arc Welding shows very high level, but the welding speed is lower than that of gas metal arc welding. Also, the welding quality by automatic GTAW is variable as the arc characteristics is changed by the consumption of electrode tip. The purpose of this study is to investigate the relation between the properties of tungsten electrode tip and the various arc characteristics at high current region. In this study, the high welding current 200A was applied to the repeated arc start test and long term arcing test using the $\phi$3.2 tungsten electrodes with cone angle 30$^{\circ}$, 45$^{\circ}$, 60$^{\circ}$sharp tip, and 60$^{\circ}$surface polished (S.P.) sharp tip. It was confirmed that the maximum arc pressure by the initial electrode condition was highest in 45$^{\circ}$sharp tip, and the next in 60$^{\circ}$sharp tip, the last was in 30$^{\circ}$sharp tip and 60$^{\circ}$S.P.. But, the maximum arc pressure after the repeated arc start test and long term arcing test was decreased considerably. But, the maximum arc pressure was highest also in 45$^{\circ}$ sharp tip after the tests, the next was in 30$^{\circ}$sharp tip, and the last was in 60$^{\circ}$sharp tip and 60$^{\circ}$S.P.. The arc start characteristics was the most excellent in 60$^{\circ}$S.P., By long term arcing test, the lanthania included in tungsten electrode was extinguished at tip surface preferentially, therefore the arc characteristics of electrode tip got worse.

• 한국표면공학회지
• /
• 제53권3호
• /
• pp.95-103
• /
• 2020

In this study, the material used in the hot dip galvanizing equipment was poorly corrosion-resistant, so it was performed to solve the cost and time problems caused by equipment replacement. The theoretical calculation was performed using the DV-Xα method(Discrete Variational Local-density approximation method). The alloy (STS4XX series) of the equipment currently used has a martensite phase. Therefore, the theoretical calculation was performed by applying P4 / mmm, which is a tetragonal structure. The new alloy was chosen by designing theoretical values close to existing materials. Considering elements that contribute to corrosion, most have high prices. Therefore, the design was completed by adjusting the content using only the components of the reference material in the theoretical design. The final design alloys were chosen as D6 and D9. Designed D6 and D9 were dissolved and prepared using an induction furnace. After the heat treatment process was completed, the corrosion rate of the alloys was confirmed by using the potentiodynamic polarization test. The surface of the prepared alloys were processed horizontally and then polished to # 1200 using sand paper to perform potentiodynamic polarization test. Domestic products: 4.735 mpy (mils / year), D6: 0.9166 mpy, D9: 0.3372 mpy, alloys designed than domestic products had a lower corrosion rate. Therefore, the designed alloy was expected to have better erosion resistance.

• Restorative Dentistry and Endodontics
• /
• 제20권2호
• /
• pp.487-507
• /
• 1995

Composite resin repair requires strong bond strength between the new and old materials. The objective of the current study was to identify the optimal treatments for sufficient bond strengths. Bondings between same kinds of materials and cross bondings using chemical curing composites and light curing composites were tested. Surface treatments included the methods of sand-blasting, acid etching and coating of bonding agent. Seven kinds cases of combinations from three kinds of methods were experimented and compared with a control group of which surfaces were highly polished. Measurements of shear bond strength and observations of surface morphologic changes using a scanning electron microscope were done. Following conclusions were drawn : 1. The highest bond strength among composite resins were exhibited by the treatment of the sand-blasting and the coating of bonding agent. 2. Acid etched surfaces showed the lowest bond strength. Bond strengths obtained from experimental groups including acid etching were lower than those obtained from same kinds of experimental groups without acid etching. 3. Simple method of the coating of bonding agent produced the slightly increased bond strength on chemical curing composite and reduced bond strength on light curing composite. 4. Bonding surfaces of chemical curing composite resin showed slightly higher bond strengths than light curing composite resin, however significant differences were not confirmed statistically. 5. More significant irregular surfaces were created by sand-blasting method than acid etching method. 6. A principal component of fillers of both resins was silicon. Acid etching method produced the seperations and degradations of fillers, these were significant on light curing composite resins which containing barium fillers.

• Current Optics and Photonics
• /
• 제3권3호
• /
• pp.199-203
• /
• 2019

The characteristics of a photonic crystal fiber sensor with reuleaux triangle are studied by using the finite element method. The wavelength sensitivity of the designed optical fiber sensor is related to the arc radius of the reuleaux triangle. Whether the core area is solid or liquid as well as the refractive index of the liquid core contributes to wavelength sensitivity. The simulation results show that larger arc radius leads to higher sensitivity. The sensitivity can be improved by introducing a liquid core, and higher wavelength sensitivity can be achieved with a lower refractive index liquid core. In addition, the specific channel plated with gold film is polished and then analyte is deposited on the film surface, in which case the position of the resonance peak is the same as that of the complete photonic crystal fiber with three analyte channels being filled with analyte. This means that filling process becomes convenient with equivalent performance of designed sensor. The maximum wavelength sensitivity of the sensor is 10200 nm/RIU and the resolution is $9.8{\times}10^{-6}RIU$.

• 대한심미치과학회지
• /
• 제24권2호
• /
• pp.101-121
• /
• 2015

지르코니아 폴리크리스탈은 (Y-TZP) 다른 치과용 세라믹에 비해 기계적 강도와 파절저항성이 우수하다. 지르코니아 기반 세라믹은 캐드캠 시스템을 바탕으로 고정식 수복물 제작에 성공적으로 소개되어 왔다. 이는 고정식 수복물을 위한 금속 구조물의 임상적 대안으로 제시되었다. 지르코니아 수복물의 가장 흔한 합병증은 상부 도재의 파절이다. 다른 옵션은 고도로 반투명한 지르코니아를 전부지르코니아 고정식 수복물로 사용하는 것이다. 본 논문에서는 전부지르코니아 수복물의 장점, 지르코니아 수복물의 임상적용, 지대치 삭제, 대합치 마모, 지르코니아와 레진시멘트와의 접착, 그리고 기공소와의 의사소통에 관하여 보고하였다.

• Restorative Dentistry and Endodontics
• /
• 제18권1호
• /
• pp.103-113
• /
• 1993

The purpose of this study was to evaluate the tensile bond strength of composite resin inlays according to the their internal surface treatment and types of luting cement and compared them with the conventional direct resin filling thchnique. Class II cavities were prepared in 50 extracted human molar teeth, and then equally divided into five groups. Group 1 : Cavities of control group were directly filled with P-50. Group 2 : Cavities of resin inlay group were luted with resin cement. Group 3 : Cavities of resin inlay group were luted with luting G-I cement. Group 4 : Cavities of resin inlay group were luted with resin cement after sandblasting. Group 5 : Cavities of resin inlay group were luted with luting G-I cement after sandblasting. All specimens were polished with same method and stored in normal saline for 24 hours before testing. An Universal Testing machine(Model No. AGS-100A, Shimadzu, Japan) was used to apply tensile loads in the vertical direction, and the force required for separation was recorded with a cross-head speed of 5mm/min and 100kg in full scale. The results were as follows : 1. The mean tensile bond strength was lowest in group luted with luting G-I cement, with measurements of $14.45{\pm}0.78(kg/cm^2)$ and highest in group luted with resin cement after sandblasting, with measurements of $49.6{\pm}2.74(kg/cm^2)$. 2. The tensile bond strength was greater in resin inlay groups luted with resin cement than in control group and resin inlay groups luted with luting G-I cement(P<0.05). 3. The tensile bond strength was lower in resin inlay groups luted with luting G-I cement than in control group(P<0.05). 4. The tensile bond strength was greater in resin inlay groups luted with resin cement or luting G-I cement after sandblasting than without that(P<0.05).

• Journal of Korean Dental Science
• /
• 제10권1호
• /
• pp.10-21
• /
• 2017

Purpose: The purpose of this study was to investigate the electrochemical characteristics of nanotubular Ti-25Nb-xZr ternary alloys for dental implant materials. Materials and Methods: Ti-25Nb-xZr alloys with different Zr contents (0, 3, 7, and 15 wt.%) were manufactured using commercially pure titanium (CP-Ti), niobium (Nb), and zirconium (Zr) (99.95 wt.% purity). The alloys were prepared by arc melting in argon (Ar) atmosphere. The Ti-25Nb-xZr alloys were homogenized in Ar atmosphere at $1,000^{\circ}C$ for 12 hours followed by quenching into ice water. The microstructure of the Ti-25Nb-xZr alloys was examined by a field emission scanning electron microscope. The phases in the alloys were identified by an X-ray diffractometer. The chemical composition of the nanotube-formed surfaces was determined by energy-dispersive X-ray spectroscopy. Self-organized $TiO_2$ was prepared by electrochemical oxidation of the samples in a $1.0M\;H_3PO_4+0.8wt.%$ NaF electrolyte. The anodization potential was 30 V and time was 1 hour by DC supplier. Surface wettability was evaluated for both the metallographically polished and nanotube-formed surfaces using a contact-angle goniometer. The corrosion properties of the specimens were investigated using a 0.9 wt.% aqueous solution of NaCl at $36^{\circ}C{\pm}5^{\circ}C$ using a potentiodynamic polarization test. Result: Needle-like structure of Ti-25Nb-xZr alloys was transform to equiaxed structure as Zr content increased. Nanotube formed on Ti-25Nb-xZr alloys show two sizes of nanotube structure. The diameters of the large tubes decreased and small tubes increased as Zr content increased. The lower contact angles for nanotube formed Ti-25NbxZr alloys surfaces showed compare to non-nanotube formed surface. The corrosion resistance of alloy increased as Zr content increased, and nanotube formed surface showed longer the passive regions compared to non-treatment surface. Conclusion: It is confirmed that corrosion resistance of alloy increased as Zr content increased, and nanotube formed surface has longer passive region compared to without treatment surface.