• 제목/요약/키워드: Lower limits of normal

검색결과 63건 처리시간 0.023초

A Modified Target Costing Technique to Improve Product Quality from Cost Consideration

  • Wu, Hsin-Hung
    • International Journal of Quality Innovation
    • /
    • 제6권2호
    • /
    • pp.31-45
    • /
    • 2005
  • The target costing technique, mathematically discussed by Sauers, only uses the $C_p$ index along with Taguchi loss function and ${\bar{X}}-R$ control charts to set up goal control limits. The new specification limits derived from Taguchi loss function is linked through the $C_p$ value to ${\bar{X}}-R$ control charts to obtain goal control limits. This study further considers the reflected normal loss function as well as the $C_{pk}$ index along with its lower confidence interval in forming goal control limits. With the use of lower confidence interval to replace the point estimator of the $C_{pk}$ index and reflected normal loss function proposed by Spiring to measure the loss to society, this modified and improved target costing technique would become more robust and applicable in practice. Finally, an example is provided to illustrate how this modified and improved target costing technique works.

에스테르화합물에 대한 표준끓는점과 인화점을 이용한 폭발하한계 추산 (Estimation of the Lower Explosion Limits Using the Normal Boiling Points and the Flash Points for the Ester Compounds)

  • 하동명
    • 한국안전학회지
    • /
    • 제22권5호
    • /
    • pp.84-89
    • /
    • 2007
  • 폭발하한계는 가연성물질의 화재 및 폭발 위험성을 결정하는데 사용되는 중요한 연소특성치의 하나이다. 본 연구에서 에스테르 화합물에 대한 폭발하한계는 액체 열역학이론을 근거로 표준끓는점과 인화점을 이용하여 예측하였다. 그 결과, 문헌값과 예측값의 A.A.P.E.(average absolute percent error)는 8.80vo1%이고, A.A.D.(average absolute deviation)는 0.18vo1% 그리고 상관계수는 0.965로써 문헌값과 예측값은 일치하였다. 제시된 방법론 사용에 의해 다른 가연성물질의 폭발하한계 예측이 가능하다.

An Attempt to Model Distributions of Machined Component Dimensions in Production

  • Cogun, Can;Kilinc, Biinyamin
    • Journal of Mechanical Science and Technology
    • /
    • 제16권1호
    • /
    • pp.60-74
    • /
    • 2002
  • In this study, normal, log-normal, triangular, uniform. Weibull, Erlang and unit beta probability density functions are tried to represent the behaviour of frequency distributions of workpiece dimensions collected from various manufacturing firms. Among the distribution functions, the unit beta distribution function is found to be the best fit using the chi-square test of fit. An attempt is made for the adoption of the unit beta model to x-bar charts of quality control in manufacturing. In this direction, upper and lower control limits (UCL and LCL) of x-bar control charts of dimension measurements are estimated for the beta model, and the observed differences between the beta and normal model control limits are discussed for the measurement sets.

북동태평양 클라리온-클리퍼톤 지역 심해저 표층 퇴적물의 지질공학적 특성 연구 (A Study on Geotechnical Properties of Deep-sea Sediments in Clarion-Clipperton Fracture Zone of NE Pacific)

  • 지상범;오재경;이현복;김기현
    • Ocean and Polar Research
    • /
    • 제25권2호
    • /
    • pp.133-145
    • /
    • 2003
  • Deep-sea surface sediments were collected using a multiple corer at 20 stations of Clarion-Clipperton fracture zone in the northeast equatorial Pacific to understand latitudinal and longitudinal variations of geotechnical properties. There was a distinct latitudinal variation of geotechnical properties in the study area. The northern sediments showed finer grain size, lower water content and porosity, higher bulk density and specific grain density, lower liquid limits and plastic limits than their southern counterparts. The northern sediments are classified into inorganic clays of low plasticity (fat clays) on plasticity charts and normal to active clay on activity chart, whereas, the southern sediments are classified into fine-grained, highly-plastic, inorganic and biogenic silt or organic clays on plasticity chart and normal to very active clay on activity chart. When shear strength are considered, the northern sediments were found to be in unconsolidated states, while the southern ones to be normal to over-consolidated states. These latitudinal variations in sediment characteristics are likely caused by differences in productivity of surface water that controls sediment compositions, sedimentation rates, and grain solubility.

한국산 잡견의 정상 생리학적 기준치 (Normal Physiologic Data of Korean Mongrel Dogs)

  • 김종환
    • Journal of Chest Surgery
    • /
    • 제2권1호
    • /
    • pp.115-132
    • /
    • 1969
  • The normal physiological values of Korean mongrel dogs were studied, comparing them with foreign references, on the basis of control physiological data measured on 110 cases out of the dogs submitted to the experiments in our department. The hemodynamic measurements varied widely between the both limits of reported normal control data, with the mean value of heart rate $140.4{\pm}26.6$/min., and both the systolic and diastolic arterial blood pressures $137.2{\pm}31.7$mmHg and $104.7{\pm}14.4$ mmHg, as well as the venous pressure of $9.11{\pm}2.18$ cm.$H_2O$. Hematologically, the number of red blood cells $4,571,000{\pm}767,000$per cu.mm., the amount of hemoglobin $11.57{\pm}3.74$ gm/dl and the hematocrit $37.3{\pm}7.2$ per cent, were equally the values a little lower than the reported normal means. However, the white blood cells were within the reported normal limits both in number, $10,384{\pm}4,877$ per cu. mm and their differential counts with slightly broader ranges of variation. The platelet count was $149,800{\pm}47,000 $per cu. mm and was also far below the normal, while the coagulation time $9.03{\pm}2.69$min. and the prothrombin time $13.17{\pm}6.52$sec were within normal limits, though a little prolonged. The serum electrolytes, Na $146.6{\pm}10.44$mEq/L.,K $4.46{\pm}0.84$mEq/L., CI $118.3{\pm}7.88$mEq/L. and Ca $11.45{\pm}5.62$mg./dl, and the blood glucose level of $94.9{\pm}31.79$mg./dl were essentially not different from the reported normal values. The serum proteins, total protein $7.15{\pm}1.41$gm/dl., albumin $4.09{\pm}0.77$gm./dl. and globulin $3.18{\pm}0.88$gm/dl. were included near the higher limits of the reported normal levels. The thymol turbidity 0.1-3.04 units were normal in 10 cases, and the cephaline flocculation was within normal range except 2 cases out of 26 dogs, showing two positive in 24 hours. And the nitrogen series, NPN $34.61{\pm}10.29$mg/dl. and BUN $12.77{\pm}6.37$mg./dl. were normal. It may be concluded that from the point of view of hereby measured physiological data compared with the foreign references, the Korean mongrel dogs have a compatible laboratory data with only the special regards to their tendency toward anemia in red blood cell series.

  • PDF

TiN 박막 처리될 베어링 볼의 마모 수명 및 메커니즘에 관한 연구 (A Study on Wear Life and Mechanisms of TiN Coated Bearing Balls against Steel Disks)

  • 한지훈;조정우;이영제
    • 한국윤활학회:학술대회논문집
    • /
    • 한국윤활학회 2000년도 제32회 추계학술대회 정기총회
    • /
    • pp.378-384
    • /
    • 2000
  • This paper presents the results of the repeated sliding tests to determine the wear-life of TiN coated AISI 52100 bearing balls deposited by PVD method and to show the wear mechanisms of those. The sliding tests were carried out using a ball-on-disk tribometer under ambient conditions. The coefficient of friction, wear volume and the cycles to failures of TiN coated bearing balls were measured with different normal loads and roughness of lower specimens. On the wear-life diagram, the normal loads and the cycles to failure showed the good linear relation on log-log coordinate. With a decreasing normal load, the diagram showed that the wear-limits, at which the coated bearing balls survived more than 4000cycles were under 0.1N of the normal load.

  • PDF

피복된 판재의 성형 특성에 관한 실험적 연구 (An Experimental Study on the Forming Characteristics of Pre-Coated Metals)

  • 김호윤;왕신일;배원병
    • 소성∙가공
    • /
    • 제9권5호
    • /
    • pp.463-468
    • /
    • 2000
  • An experimental study has been performed to investigate the forming characteristics of pre-coated metals(PCMs) widely used in domestic appliances through Erichsen tests and deep drawing tests. Erichsen tests are performed to find out the forming limits of seven pre-coated metals in normal conditions. Rectangular deep-drawing tests are carried out to know the effects of die materials and blank metals on forming loads and surface defects of final PCM products. In the deep-drawing test, four die materials [STD11(TiCN), STD11, STD11(TD), AMPCO] are used. In the Erichsen test, the forming limits of PCMs are obtained from flaking or crack of pre-coated films and lower than those of base metals. In respect of surface roughness and forming load, STD11(TD) and AMPCO materials are superior to my other die-materials used in the deep-drawing test.

  • PDF

비정규분포공정에서 계량치관리를 위한 메디안 특수 관리도의 모형설계와 그 적용에 관한 실용에 연구 (A Study of the effective approach method for median control chart of non-normally distributed process)

  • 신용백
    • 기술사
    • /
    • 제21권4호
    • /
    • pp.19-32
    • /
    • 1988
  • Whereas is non-symmetrical distribution manufacturing process the traditional X-chart by Shewhart is not plotted relatively on the central line but plotted on the skew of upper-hand side or lower-hand side. That is to say, for the purpose of producing either upper-specification-oriented items or lower-specification-oriented items, and when we carry out tighter control so as to have them pass only its specifications, the distribution shape naturally has a non-normal distribution. In the Shewhart X-chart, which is the most widely used one in Korea, such skewed distributions make tile plots to be inclined below or above the central line or outside the control limits although no assignable causes can be found. To overcome such short comings is non-normally distributed processes, a distribution-free type of confidence interval can be used, which should be haled on order statistics. This thesis is concerned with the design of control chart based on a sample median which is easy to use in practical situation and therefore properties for non-normal distributions, such as Gamma, Beta, Lognormal, Weibull, Pareto, and Truncated-normal distributions, may be easily analyzed. To enhance this improvement, I proved the property of practical applications of control chart method by comparing and analyzing the case studies of practical application of special purpose control chart method, and also by introducing the new designed median control chart.

  • PDF

한국인혈압(韓國人血壓)의 정상치역(正常値域) (Normal Range of Blood Pressure of Korean)

  • 김인달;안윤옥;조수헌
    • Journal of Preventive Medicine and Public Health
    • /
    • 제7권2호
    • /
    • pp.395-401
    • /
    • 1974
  • In order to figure out the normal range, lower limit of hypertension and upper limit of hypotension of the blood pressure of Korean, authors had measured blood pressure according to Korotkow's method for 31,897 healthy persons as samples who were occupied different levels of the social class except cases who would seem to be the essential hypertension and had the diseases affecting to secondary hypertension. A following conclusion was induced by actual measurement and statistical reasoning. 1. The normal range and limits of hypo- and hypertension by sex and age groups of Korean were demonstrated in Table 1 and Figure 1. 2. The more aging the higher value of blood pressure in both sexes, especially women rather than men and systolic as to diastolic. 3. Generally, blood pressure values of female were lower than male, after 55 years of age, however, the crossing phenomenon was recognizable. 4. To settle the normal and abnormal ranges of the blood pressure of Korean, it was attempted that $M{\pm}1.282{\sigma}$ as normal range, $M+2{\sigma}$ as lower limit of hypertension and $M-2{\sigma}$ as upper limit of hypotension were calculated, and regression lines were drawn to adjust the biological variables and derive continuity from each age class. (Fig. 2 and 3) 5. The blood pressure levels were becoming elevated as to getting increased of the body weight, particularly diastolic value at 40-49 age group in male and systolic value at 30-39 age group in female.

  • PDF

Clinical Study of Gamdutang Complex Formula on Patients of Acute Renal Failure due to Paraquat Intoxication

  • Kim Dong Woung
    • 동의생리병리학회지
    • /
    • 제16권3호
    • /
    • pp.588-593
    • /
    • 2002
  • Paraquat, one of the potent herbicides, causes fatal damage to many vital organs, when orally ingested, resulting in circulatory failure, respiratory distress syndrome, and a few other serious problems, but there is no known specific antidote against it. Of the possible problems related to paraquat intoxication, oliguric acute renal failure, which has been known to develop within 24 or 48 hours after intoxication, are notoriously life-threatening. So we attempted to investigate the clinical characteristics and progress of paraquat-induced acute renal failure and the therapeutic possibilities of herbal medicines. All of the fifteen subjects were treated with intravenous fluid injection of 5% dextrose saline or 10% dextrose water in conjunction with herbal medicines which were used for oral administration or gargling. Gamdutang, a decoction of Semen Glycin(黑豆 200g) and Radix Glycyrrhizae(甘草 100g) with addition of other herbs when necessary, was administered orally. At the same time, gargling fluid, consisted of Chinese ink(墨汁), char-frying powder of Rhei Rhizoma(大黃炒炭末), Succus phyllostachyos(竹瀝), was used to detoxify the oral cavity. Serum levels of Blood Urea Nitrogen(BUN) and Creatinine reached its peak on the third day of hospitalization, but then decreased and fell within the normal range on the 7th day and remained there. Serum levels of Na+ and K+ decreased down below the lower limits of normal range on the 7th day and on the 3rd day, respectively. Then they returned back within normal limits. Mean urine output on the 1st day of hospitalization was 1,050ml and it continuously increased to reach more than 2,000ml on the 14th day. From that day on, it stayed over 2,000ml. Fifteen cases of acute renal failure caused by paraquat intoxication were treated with combined treatments of oriental and western medicine in our hospital. However, we think that it is necessary to study further about the way to combine oriental and western medicine, to find out a more effective treatment method.