• 대한치과교정학회지
• /
• 제37권6호
• /
• pp.421-431
• /
• 2007

상악 편악 소구치발치에 의한 교정치료는 임상적으로 상당히 많이 행해지고 있는 현실이지만 임상적 활용도에 비하여 그 보고는 희귀하다. 본 연구는 선택적 교정치료로 행해지는 상악 편악 소구치발치에 의한 교정치료 시 치료전후의 상, 하악 절치위치 및 입술위치 변화를 양악 소구치발치에 의한 교정치료의 치료 전후와 비교, 분석하여 편악발치에 의한 교정치료의 진단적 지침을 제시하고 치료 종료 후의 치료결과를 알아보고자 시행되었다. 최근에 교정치료가 종료된 환자 중에서 초진 시 수평피개량이 7 mm 이상을 보이는 증례 중 성공적으로 치료되었다고 판단되는 40증례를 선정하여, 교정치료의 목적으로 상악 제1소구치만을 발치하여 치료한 군(이하 편악발치군; Group 1, 20증례)과 상, 하악 제1소구치를 발치하여 치료한 군(이하 양악발치군; Group 2, 20증례)으로 나누어 치료 전후의 측모 두부방사선 사진을 채득하여 연구재료로 사용하였다. 연구결과 초진 시 편악발치군에서 양악발치군과 비교하여 하악 절치의 위치는 순측경사의 정도가 덜 하였으며 하순의 돌출도도 심하지 않았다. 치료종료 시 편악발치군에서 양악발치군과 비교하여 하악 절치의 위치를 제외한 모든 항목에서 두 군과의 차이는 관찰되지 않았다. 치료 전후의 변화량 비교에서 상, 하악 절치의 이동량은 양악발치군에서 많게 관찰되었으며 하악 절치의 견인에 따라 하순의 돌출도 감소의 양도 양악발치군에서 크게 관찰되었다. 상순의 위치는 두 군간의 차이가 관찰되지 않았다. 큰 수평피개를 갖는 증례에서 적절한 발치 선택을 위한 진단정보의 수집에 있어 상악 절치의 위치 및 상순의 돌출도는 충분한 정보를 제공하지 않았다. 하악 절치의 위치와 하순의 돌출량은 큰 수평피개를 갖는 증례에 있어서 편악발치 혹은 양악발치를 결정하기 위한 적절한 진단적 근거를 제시하였다. 큰 수평피개를 갖고 있는 환자 중 하악 절치의 순측경사가 심하지 않으며 하순의 돌출이 심하지 않은 안모를 갖고 있는 증례의 경우 편악발치에 의해 좋은 치료결과를 얻을 수 있었다.

• 대한소아치과학회지
• /
• 제44권2호
• /
• pp.138-146
• /
• 2017

이 연구의 목적은 쥐의 하악 절치에서 생물학적 광화에 대한 발육 단계를 타임테이블로 수립하는데 있다. 맹출 길이가 측정되었고 조직학적 절편과 미세단층촬영기(microscopic computerized tomography) 단면으로 절치 발육의 4단계 (1) preodontoblast, (2) dentin matrix secretion, (3) enamel matrix secretion, 그리고 (4) enamel calcification을 확인하였다. 쥐의 하악 절치에서 총 맹출 속도는 $600{\pm}70{\mu}m/day$ ($mean{\pm}SD$; n = 12) 였다. 법랑질 분비 길이는 조직학적 절편에서 $4.59{\pm}0.75mm$, 방사선학적 단면에서 $3.64{\pm}0.63mm$였고 이를 각각 속도로 환산하면 $180.4{\pm}30.0hours$, $145{\pm}25hours$ 으로 나타났다(n = 24). 이러한 결과들은 쥐의 절치의 생물학적 광화가 일어나는 발육 4 단계가 단 며칠 만에 이루어진다는 것을 제시한다. 이번 동물 실험연구의 결과는 발육 중인 치배의 빠른 광물화 과정을 치아 발육 기간의 분석을 통해 이해할 수 있다는 것에 의의가 있다.

• 대한치과교정학회지
• /
• 제34권5호
• /
• pp.380-393
• /
• 2004

본 연구의 목적은 정상교합자에서 전후방적 악골 관계에 따라 치아치조부 보상이 나타나는 양상을 알아보고 교정치료에 사용되는 여러 계측 항목에서 이들이 반영되는 정도를 분석하기 위한 것이다 악골 관계에 대한 치아치조성 보상을 분석하기 위하여 정상 교합자 90명(남자 50명, 여자 40명)의 측모 두부 X-선 사진을 계측하여 전후방적 악골 관계에 따라 각각 세 군으로 분류하였다. 6개의 골격 계측 항목과 19개의 치아 계측 항목에 대해 independent t-test, 상관분석과 회귀분석을 실시한 결과, 다음과 같은 결론을 얻었다. 악골 관계에 대한 치아치조부 보상으로 하악골이 상악골에 비해 전방 위치할수록 상악 전치는 순측 경사되고 하악 전치는 설측 경사되며 교합 평면은 경사가 완만해졌다. 치아 계측 항목 중 L1 to SN과 L1 to FH에서 전후방적 악골 관계에 대한 보상적 변화가 가장 유의성 있게 나타나 상악 전치보다 하악 전치가 치아치조부 보상과 더 관련이 있었다. 치아 계측 항목 중 U1 to PtGu과 L1 to APog은 전후방적 악골 관계와 무관하게 거의 일정한 값을 보였다.

• 대한치과교정학회지
• /
• 제9권1호
• /
• pp.133-140
• /
• 1979

The author compared patients showing two extremes of incisor vertical relationship to find out differences in craniofacial morphology which might influence face height and incisor overbite. The subjects consisted of 53 open-bite cases and the same number of deep-bite cases. The results were as follows: 1. On the average, the lower face height was significantly greater in open-bite cases than in deep-bite cases. 2. In open-bite cases, gonin-menton length was significantly greater than in deep-bite cases. In deep-bite cases, anterior cranial base length and posterior cranial base length were significantly greater in open-bite cases. 3. The jaw angle was significantly greater in open-bite cases. 4. The gonion-menton-nasion angle was significantly greater in deep-bite cases. 5. From geometric standpoint, the increase of jaw and joint angle would increase lower face height, but these two showed negative correlation. 6. The sizes of the jaw and joint angle might be factors of open-bite or deep-bite, but these were not the only variables that determined lower face height. 7. In open-bite cases, there was a closer correlationship between lower face height and the other linear measurments than in deep-bite cases. In deep-bite cases, there was a closer correlationship between lower face height and the other angular measurements than in open-bite cases. 8. Considering both linear and angular measurements of facial polygon, all contributed significantly to the lower face height. The nonsignificant variables were jaw and joint angle in open-bite cases, and anterior cranial base length, jaw angle, and joint angle in deep-bite cases.

• 대한치과교정학회지
• /
• 제29권4호
• /
• pp.399-409
• /
• 1999

본 연구는 교정치료동안의 전치부 후방이동에 의한 하안면부 연조직 측모 변화를 평가하기 위하여 시행되었다. 치조성 양악전돌을 주소로 내원하여 상, 하악 제 1 소구치를 발거하고 전치부 후방이동을 시행한 31증례의 치료전후 측모두부X선규격사진을 이용하였으며 성장의 영향을 배제하기 위하여 17세 이상의 한국인 여성으로 대상을 제한하였다. 치료전후 각 계측치와 변화량을 이용하여 paired f-test와 상관분석 및 회귀분석을 시행한 결과 다음과 같은 결론을 얻었다. $\cdot$치아의 후방이동량과 연조직의 후방이동량의 비는, 상악 중절치 (UIS):상순 (LS)은 1.54:1, 하악 중절치 (LIS):하순 (Ll)은 0.92:1이며 각각의 상관계수는 각각 0.746과 0.584로 나타났다. $\cdot$치료동안 연조직 자체의 두께는 상순 (UIS-LS)에서만 증가가 있었고 나머지 부위에서는 약간의 감소가 있었다. $\cdot$치아 이동량과 연조직 이동량간의 상관분석에서 상순 (LS)은 상악 중절치 (UIS)와 하순(LI)은 B점과 가장 높은 상관관계를 보였다. $\cdot$치아이동에 따른 하안면부 연조직의 이동을 예측하기 위한 다중 회귀방정식을 구할 수 있었다.

• Journal of Korean Dental Science
• /
• 제3권1호
• /
• pp.5-10
• /
• 2010

This study sought to compare the amounts of posterior anchorage loss during the en masse retraction of the upper anterior teeth between orthodontic mini-implant (OMI) and conventional anchorage reinforcement (CAR) such as headgear and/or transpalatal arch. The subjects were 52 adult female patients treated with sliding mechanics (MBT brackets, .022" slot, .019X.025" stainless steel wire, 3M-Unitek, Monrovia, CA, USA). They were allocated into Group 1 (N=24, Class I malocclusion (CI), upper and lower first premolar (UP1LP1) extraction, and CAR), Group 2 (N=15, Cl, UP1LP1 extraction and OMI), and Group 3 (N=13, Class II division 1 malocclusion, upper first and lower second premolar extraction, and OMI). Lateral cephalograms were taken before (T0) and after treatment (T1). A total of 11 anchorage variables were measured. Analysis of variance was used for statistical analysis. There was no significant difference in treatment duration and anchorage variables at T0 among the three groups. Groups 2 and 3 showed significantly larger retraction of the upper incisor edge (U1E-sag, 9.3mm:7.3mm, P<.05) and less posterior anchorage loss (U6M-sag, 0.7~0.9mm:2mm, P<.05; U6A-sag, 0.5mm:2mm, P<.01) than Group 1. The ratio of retraction amount of the upper incisor edge per 1 of anchorage loss in the upper molar made for the significant difference between Groups 1 and 2 (4.6mm:7.0mm, P<.05). Group 3 showed a relatively distal inclination of the upper molar (P<.05) and the intrusion of the upper incisor and first molar (U1E-ver, P<.05; U6F-ver, P<.05) compared to Groups 1 and 2. Although OMI could not shorten the treatment duration, it could provide better maximum posterior anchorage than CAR.

• 대한치과교정학회지
• /
• 제13권1호
• /
• pp.15-30
• /
• 1983

This study was to investigate the effect of functional pressures of the tongue and lips on the incisor relationship. The incisor relationship was devided into two categories; one is vertical relationship which is subdevided into open bite, normal overbite and deep bite on the basis of overbite, and the other is anteroposterior relationship which is subdevided into cross bite, normal overjet and large overjet on the basis of overjet. The functional tongue and lip pressures exerted to incisors were measured with subminiature pressure sense from the 99 subjects, 19 of normal overbite and overjet, 26 of open bite, 18 of deep bite, 17 of cross bite and 19 of large overjet with age of 17-20, and cephalograms were taken from the same subjects. Functional pressures were analyzed and correlated to craniofacial veriables. The results of present investigation led to the following conclusions. 1. There were no differences in functional and maximum pressures by the tongue and lips exerted to maxillary incisors between normal occlusion, open bite, deep bite, cross bite and large overjet. 2. Significant differences in functional and maximum pressures by the tongue and lips exerted to mandibular incisors have been shown to exist between open bite and deep bite, but no differences between cross bite and large overjet. 3. Equilibrium between tongue pressures and lip pressures did not exist. 4. Significant differences in the ratio of upper functional and maximum pressures to lower pressures of the tongue and lips exerted to upper and lower incisors have been shown to exist between open bite and deep bite, and no differences between cross bite and large overjet. 5, There was significant correlation between functional and maximum pressures exerted to mandibular incisors and craniofacial variables, but not significant correlation between functional and maximum pressures exerted to maxillary incisors and craniofacial variables.

• Imaging Science in Dentistry
• /
• 제45권4호
• /
• pp.227-232
• /
• 2015

Purpose: The purpose of this study was to evaluate the influence of methods of establishing the midsagittal reference plane (MRP) on the locations of midfacial landmarks in the three-dimensional computed tomography (CT) analysis of facial asymmetry. Materials and Methods: A total of 24 patients (12 male and 12 female; mean age, 22.5 years; age range, 18.2-29.7 years) with facial asymmetry were included in this study. The MRP was established using two different methods on each patient's CT image. The x-coordinates of four midfacial landmarks (the menton, nasion, upper incisor, and lower incisor) were obtained by measuring the distance and direction of the landmarks from the MRP, and the two methods were compared statistically. The direction of deviation and the severity of asymmetry found using each method were also compared. Results: The x-coordinates of the four anatomic landmarks all showed a statistically significant difference between the two methods of establishing the MRP. For the nasion and lower incisor, six patients (25.0%) showed a change in the direction of deviation. The severity of asymmetry also changed in 16 patients (66.7%). Conclusion: The results of this study suggest that the locations of midfacial landmarks change significantly according to the method used to establish the MRP.

• 대한치과보철학회지
• /
• 제45권5호
• /
• pp.633-643
• /
• 2007

Statement of problem: Recently there are on an increasing trend of using implants-especially in edentulous mandible of severly alveolar bone recessed. Purpose: The aim of this study was to analyze the displacement and stress distribution of various mandibular implant-retained overdenture models supported by two implants in interforaminal region under the occlusion scheme load. Material and method: FEA models were made by the 3D scanning of the edentulous mandibular dentiform. The three models were named as Model M1, M2, and M3 accord ing to the position of implants: M1, Lt. incisor area, M2, Canine area, and M3, 1st Premolar area. Inter-implant angulation model was named as M4. Conventional complete denture was named M5 and used as a control group. Ball implant and Gold matrice were used as a retentive anchors. The occlusion type loads were applied horizontally over each tooth. Results: 1. In mandibular implant retained overdenture Canine Protected Occlusion type load resulted in higher levels of stress to the implants and female matrices than other types of loads. 2. The overdenture model M1, with implants in lateral incisor areas resulted in lower stress concentration to the implants and female matrices than other models. 3. In mandibular implant retained overdenture the stresses of the implant and female matrice were lower in mesially inclined implant than these of parallel installed implant. Conclusion: Lateral incisor areas could be the best site for the implants in mandibular implant-retained overdenture. The mandibular implant retained overdenture models mentioned above showed to the lowest stress to the implants and female matrices.

• 대한치과교정학회지
• /
• 제24권2호
• /
• pp.247-273
• /
• 1994

The purpose of this study was to evaluate the dental arch morphology and the occlusal characteristics in the Koreans from the dental-anthropological point of view. The sample consisted of dental stone casts obtained from 120 Korean adults and 142 Japanese adults. Japanese casts and Caucasian data had been preserved at the Dept, of Orthodontics of Tokyo Medical and Dental University. Tooth size and dental arch morphology of the Koreans were compared with that of the Japanese. On the other hand, the variations of 30 crown traits, categorized and quantitatively graded, were compared between two peoples and the frequency distribution of each crown traits were analyzed by means of Chi-square test. The results were summerized as followings ; 1. There was a significant sexual difference in dental arch length and width in the Korean, in which male had a longer and wider dental arch than female. There was a close resemblance for dental arch morphology between the Koreans and the Japanese, except for a little longer mandibular arch of the Japanese. 2. In general, Korean male had wider crown than female, particulary in central incisor,canine,1st molar of maxilla and canine, 1st and 2nd molar of mandible with significance. The Korean had wider maxillary first molar, smaller mandibular first and second molar than the Japanese in both sex. 3. In crown traits of the Korean, shovel-shaped incisor showed lower frequency distribution than in the Japanese, but higher than in the Caucasians. Frequency of incisor reduction was shown higher distribution than in the Japanese and the Caucasians. Carabelli's tubercle showed higher frequency distribution than in Japanese, but remarkably lower than in Caucasians.