• 대한치과교정학회지
• /
• 제14권1호
• /
• pp.161-172
• /
• 1984

This study was undertaken to evaluate the cephalometric changes of the soft tissue and skeletal profile subsequent 10 the rapid palatal expansion in 25 Angle's Class III cases, ranging in age from six to fifteen years, with cross-bite of the anterior teeth, underdevelopment of maxilla and facial disharmony Following results were obtained: 1. ANS moved downward, Point A presented forward & downward movement increasing SNA and Point B presented backward & downward movement decreasing SNB. 2. Mandible was rotated to backward & forward and maxilla moved forward & downward with the bite opening and improvement of anterior teeth cross-bite. 3. Soft tissue on mandible was rotated to backward & forward following hard tissue changes causing the decrease of facial convexity angle and backward & downward rotation of Point B', Pog'. 4. Response of the upper lip was more significant in downward than forward direction, and correlated with the upper central incisor and mandible rotation. 5. Response of the lower lip was more significant in downward than backward direction, and correlated with the mandible rotation. 6. There was a rather high degree of correlation between skeletal profile and soft-tissue profile, 1 : LS, $\bar{1}$:Pog', Pog:LS, Pog:LI, Pog:Pog' in horizontal measurements and $\bar{1}$:Pog', Pog:LI, Pog:Pog' in vertical measurements.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제26권2호
• /
• pp.172-178
• /
• 2000

When we establish treatment planning of facial asymmetry, we must predict each asymmetrical element that will be changed upon coronal, axial, sagittal plane. At the visual point, prediction of the change of coronal plane is most important. It is important difference between Rt. and Lt. mandibular angle belonging to posterior coronal plane, as well as anterior coronal plane, such as upper and lower incisor, or midline of chin point. Several methods for control bulk of mandibular angle are additional angle shaving after osteotomy, grinding contact area between proximal and distal segment for decrease the volume, or bone graft for increase the volume. But, at the point of bimaxillary surgery, transverse position of posterior maxilla is an important factor for control it. So, we would report transverse movement of posterior maxilla for decrease asymmetry on the posterior coronal plane of face, that is, asymmetry of mandibular angular portion.

• Restorative Dentistry and Endodontics
• /
• 제45권1호
• /
• pp.5.1-5.8
• /
• 2020

Objectives: The obturation quality of MTA, Biodentine, Total Fill BC root canal sealer (RCS), and warm gutta-percha (WGP) in teeth with simulated internal root resorption (IRR) was evaluated by using micro-computed tomography. Materials and Methods: Standardized IRR cavities were created using 40 extracted maxillary central incisor teeth and randomly assigned into 4 groups (n = 10). IRR cavities were filled with MTA, Biodentine, Total Fill BC RCS (bulk-fill form) and WGP + Total Fill BC RCS. Percentage of voids between resorptive cavity walls and obturation material (external void), and inside the filling materials (internal voids) were measured. Results: Total Fill BC sealer in the bulk-fill form presented significantly highest values of external and internal void percentages (p < 0.05). Biodentine showed a significantly lowest external void percentage (p < 0.05). WGP + Total Fill BC RCS presented significantly lower values of internal void percentages than all groups (p < 0.05), except Biodentine (p > 0.05). Conclusion: None of the filling materials were created void-free obturation in resorption cavities. Biodentine may favor its application in teeth with IRR over Angelus MTA and bulkfill form of Total Fill BC.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제31권2호
• /
• pp.143-148
• /
• 2009

Introduction: To correct abnormal occlusal plane by orthognathic surgery, we need to have clear criteria for therapeutic occlusal plane. Authors introduced the concept of individualized ideal occlusal plane(Y-plane), which is determined by the size and form of the mandible, and the ideal incisor tip considering upper and lower lip. Authors studied the following to verify if the actual occlusal plane of the patients with optimal jaw relationship corresponds with the individualized ideal occlusal plane. Patients: We reviewed 44 patients who have normal occlusion visitied in the Dept. of orthodontics, Pundang CHA hospital. Methods: We evaluated if there are agreement between individualized ideal occlusal plane(Y plane) and occlusal plane of actual patients. And we confirmed if tested group has a normal face by measuring FABA, FMA, AB-LOP. Results: There were no significant differences of FABA, FMA, AB-LOP, Mo-Y plane between male and female. FABA, FMA and AB-LOP were included in the normal value. Average distance of Mo-Y plane was $0.75{\pm}0.78mm$. Conclusion: Individualized ideal occlusal plane may be applied to orthognathic surgery.

• 대한치과교정학회지
• /
• 제18권1호
• /
• pp.227-234
• /
• 1988

To study diagnosis and treatment plan of malocclusion, comparison of race and nation and consideration of treatment technique, 885 orthodontic patients of the department of orthodontics, Infirmary of dental college, Chosun University were evaluated. The frequency and pattern of tooth extraction were studied according to malocclusion types and developmental stages of occlusion and sex. Thefollowingresultswereobtained. 1. Average frequency of tooth extraction for orthodontic treatment was $38.3\%$. 2. The frequency of tooth extraction was $43.7\%$ in class I malocclusion, $34.2\%$ in class II malocclusion and $32.1\%$ in class III malocclusion. 3. The drequency of tooth extraction was the highest in permanent dentition $(49.2\%)$. 4. The frequency of tooth extraction was not different between male and female. 5. The frequency of 3-4 premolars extraction was the highest $(57.5\%)$ and that of lower incisor extraction was the lowest $(2.9\%)$ in patterns of tooth extraction. 6. Both frequency of unilateral and single arch extraction were the highest in class III malocclusion.

• 대한두개안면성형외과학회지
• /
• 제21권6호
• /
• pp.384-386
• /
• 2020

This report describes osteotomy and iliac bone graft for malunion caused by failed mandibular fracture reduction. A 27-year-old man was referred 3 months after a motor vehicle accident. At another hospital, two operations had been performed for symphyseal fracture using two resorbable plates. Malocclusion was noted, and panoramic radiography and computed tomography revealed a misaligned dental arch, with a 9.37-mm gap between the central and the lateral incisor of the left mandible. A wafer was made from the patient's dental model, and a maxillary arch bar was applied. Through a lower gingivolabial incision, osteotomy was performed between the malunited symphyseal fracture segments. Both segments were reduced to their original position using the wafer and fixed with titanium miniplates via intermaxillary fixation (IMF). The intersegmental gap was filled with cancellous bone from the iliac crest. The gingival defect was covered with a mucosal transposition flap from the gingivolabial sulcus. IMF and the wafer were maintained for 5 and 9 weeks, respectively. At postoperative week 13, the screws were removed from the mandible and satisfactory occlusion was noted. His mouth opening improved from 2.5 to 3 finger breadths (40 mm). This case demonstrates the need for sufficient IMF when using resorbable plates.

• Journal of Korean Dental Science
• /
• 제3권1호
• /
• pp.17-24
• /
• 2010

Objective : To investigate the prevalence of dental anomalies and to determine the associations between dental anomalies in permanent teeth Materials and methods : The samples were 1,240 patients (760 females and 480 males, mean age=15.1 years) who visited the Samsung Medical Center. Dental anomalies were diagnosed using pre-treatment dental casts, radiographs, clinical examinations, and medical/dental histories. Prevalence and association were investigated according to gender and sidedness. The Chi-square test was performed for statistical analysis. Results : The most common missing tooth was the lower lateral incisor, followed by the lower and upper second premolars. This particular dental anomaly is characteristic of the East Asian population (prevalence of congenital missing tooth=12.3%). The upper anterior area was the most frequently affected area (prevalence of supernumerary tooth was 1.5%). The presence of a supernumerary tooth was more prevalent in males than in females (p<.05, odds ratio=3.2). The most frequently affected tooth was the upper canine (prevalence of impacted tooth=4.3%). Unilateral impaction of the upper canine occurred significantly more often compared to bilateral impaction (p<.001). The prevalence of peg lateralis was 2.7%. The presence of congenital missing tooth was closely associated with peg lateralis (p<.01). If children aged 7~8 years have peg lateralis, the rest of the teeth should be checked for congenital absences. Conclusion : The early detection of dental anomalies and understanding of their associations help clinicians determine the appropriate treatment timing and methods of dealing with these anomalies.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제32권2호
• /
• pp.132-140
• /
• 2010

Purpose: The aim of this study is to identify the usefulness of unilateral mandibular angle ostectomy, so-called "Lateral Angle Reduction", in asymmetric prognathism patients by the assessment of postoperative stability and esthetic results Patients and methods: For the retrospective study, 10 skeletal class III mandibular asymmetry patients who were performed SSRO and unilateral mandibular angle ostectomy, Lateral Angle Reduction, was selected. Lateral and posterioanterior cephalogram was taken before surgery (T0), 1day after surgery (T1) and 6month after surgery (T2). To know the esthetic results the facial width and lateral facial contour were examined on posterioanterior cephalogram and to know the postoperative stability B point and Incisor inferius was examined on lateral cephalogram. Statistical analysis was performed. Results: From T0 to T1, Intergonial width was significantly decreased, dominantly at shortened side but no significant changes at lengthened side. Those were well-maintained during 6 months. Lateral facial angle and Ramus angle was significantly decreased on only shortened side from T0 to T1. As a result, after surgery, there were no significant differences in all measurements between shortened side and lengthened side. Ramus deviation angle in shortened side and ramus angle in lengthened side which reflect the angulation of ramus on frontal plane didn't show significant changes after surgery and during postsurgical periods. Lower dental midline showed no statistical changes during postsurgical period. The relapse rate on B-point was 11.92%. Conclusion: Unilateral "Lateral angle reduction" in the asymmetric mandible is valuable to obtain the narrow lower face and symmetric facial contour with a good stability.

• 대한치과교정학회지
• /
• 제48권6호
• /
• pp.349-356
• /
• 2018

Objective: This study was performed to investigate the alveolar bone of lower incisors in skeletal Class III adults of different vertical facial patterns and to compare it with that of Class I adults using cone-beam computed tomography (CBCT) images. Methods: CBCT images of 90 skeletal Class III and 29 Class I patients were evaluated. Class III subjects were divided by mandibular plane angle: high (SN-MP > $38.0^{\circ}$), normal ($30.0^{\circ}$ < SN-MP < $37.0^{\circ}$), and low (SN-MP < $28.0^{\circ}$) groups. Buccolingual alveolar bone thickness was measured using CBCT images of mandibular incisors at alveolar crest and 3, 6, and 9 mm apical levels. Linear mixed model, Bonferroni post-hoc test, and Pearson correlation analysis were used for statistical significance. Results: Buccolingual alveolar bone in Class III high, normal and low angle subjects was not significantly different at alveolar crest and 3 mm apical level while lingual bone was thicker at 6 and 9 mm apical levels than on buccal side. Class III high angle group had thinner alveolar bone at all levels except at buccal alveolar crest and 9 mm apical level on lingual side compared to the Class I group. Class III high angle group showed thinner alveolar bone than the Class III normal or low angle groups in most regions. Mandibular plane angle showed negative correlations with mandibular anterior alveolar bone thickness. Conclusions: Skeletal Class III subjects with high mandibular plane angles showed thinner mandibular alveolar bone in most areas compared to normal or low angle subjects. Mandibular plane angle was negatively correlated with buccolingual alveolar bone thickness.

• 대한소아치과학회지
• /
• 제26권3호
• /
• pp.507-512
• /
• 1999

혼합치열기의 소아환자의 경미한 하악 전치부의 총생을 해결하는 문제와 하악 제 2 유구치의 조기 상실로 인한 하악 제 1 대구치의 근심경사 그리고 이에 따른 제 2 소구치의 맹출 공간 부족 등을 해소하기 위한 여러 가지의 방법들이 시도되어왔지만 저마다 그 술식의 적용범위나 방법 등에는 많은 어려움 들이 있어왔다. 이 연구의 목적은 이런 선택의 어려움을 가만하여 실제 임상에서 보다 간편하고 환자의 불편감을 줄여줄 수 있는 한 방법으로 Lip Bumper를 이용한 술식을 소개하고 그 적용례를 통하여 성공과 실패 사례들을 소개함으로써 임상가들에게 보다 유익한 정보를 주기 위함이다.