• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.804-807
• /
• 2002

In general, the reinforcement of a structure is performed with cylinders. In this study, it is attempted to analyze the circular reinforcement with fins. And the maximum stress and deflection is investigated fur the circular reinforcement between two plates. The shape of models are : one which has only circular reinforcements of different diameters and one which has circular reinforcements with fins and one which has fin of same length and circular cylinders of different diameters. And in each model, there are two kinds; one is with upper and lower plates and the other with none. The results shows that the maximum stress is less in the model of circular reinforcement with fins than that in the model without fins. And the maximum stress of a model without upper and lower plate is less than that of a model with plates.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.10 s.175
• /
• pp.129-136
• /
• 2005

The demand on thermos furnace of Al molten metal has recently been getting higher and higher according to the increase in use of Al and Al alloys. This study considers the estimation of the thermal and mechanical stability in the thermos furnace for Al casting. It is executed through the analysis of heat transfer on the refractory material and heat stress on each steel shell. Also, the estimation of structural stability was appraised through the strength analysis of the lower structure. In result, the temperature of steel shell rose to 320.15K and its elastic deformation was about 1.5mm. The elastic deformation of the lower structure was about 0.66mm. As a result of it, the data obtain from the analysis in this study are regarded as stable value on considering that the size of the furnace is 2500mm.

• Journal of Industrial Technology
• /
• v.27 no.B
• /
• pp.29-36
• /
• 2007

A comparative study of airborne salinity and sea wind was done for a coastal area, Sokcho city, of East Sea in Kangwon province, Korea. In this study, a relationship between the formation of airborne salinity and wind velocity was investigated, and then the airborne salinity was simulated and forecasted by the obtained wind-salinity characteristics. It is founded that most airborne salinity is brought by sea winds with the occurrence of velocity, higher than and equal to 4m/s, while the occurrence of lower wind velocities (ie., lower than 4m/s) in sea wind and the occurrence of inland wind give diluted effects on the airborne transfer. By using these characteristics and a proposed linear equation model, the salinity in Sokcho city is successfully simulated and forecasted. It is expected that the linear equation model may be useful for durability design of concrete structures under the conditions of chloride attack, induced by the airborne salinity.

• Korean Journal of Mathematics
• /
• v.27 no.1
• /
• pp.141-150
• /
• 2019

In this article we investigate the structure of rings in which lower nilradicals coincide with upper nilradicals. Such rings shall be said to be quasi-2-primal. It is shown first that the $K{\ddot{o}}the^{\prime}s$ conjecture holds for quasi-2-primal rings. So the results in this article may provide interesting and useful information to the study of nilradicals in various situations. In the procedure we study the structure of quasi-2-primal rings, and observe various kinds of quasi-2-primal rings which do roles in ring theory.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.2
• /
• pp.203-208
• /
• 1997

A series of MgO-SiO2 catalysts were prepared by coprecipitation from the mixed solution of magnesium chloride and sodium silicate. Some of the sample were modified with 1 N H2SO4 and used as modified catalysts. The addition of MgO to SiO2 caused the increase of acidity and the shift of O-H and Si-O stretching bands of the silanol group to a lower frequency in proportion to the MgO content. The acid structure of MgO-SiO2 agreed with that proposed by Tanabe et al.. Catalytic activity for 2-propanol dehydration increased in relation to the increase of acidity and band shift to a lower frequency.

• Journal of the Korean GEO-environmental Society
• /
• v.23 no.9
• /
• pp.25-31
• /
• 2022

Attaching shelf to retaining structure leads to a decrease in the total lateral earth pressure. This decrease enables the retaining structures to become more stable, to have small displacement, and to exhibit lower bending moments, the relief shelves effects are analyzed using FEM in order to understand how they stabilize cantilever wall in this study. Several models are varied by changing location and width of shelves to realize earth pressure and displacements of retaining wall. The displacement is getting smaller because earth pressure acting on shelf increases as shelves locations are lower and width is longer. The ground settlement variation effects caused by relief shelves are studied also. The ground settlement increases abruptly where shelf location is between of 0.5H and 0.625H, and settlement decreases suddenly where shelf width is between b/h=0.375 and b/h=0.500. The shelf significantly reduces earth pressure and movement of the wall. This decrease in the lateral pressure increases the retaining structure stability.

• Journal of the Institute of Convergence Signal Processing
• /
• v.6 no.4
• /
• pp.198-205
• /
• 2005

In this paper, the miniaturization of aperture-coupled RHCP patch antenna for the GPS system is treated. Circularly polarization characteristics is implemented by truncating diagonal corners of the square patch. Antenna size is reduced by inserting four uniform slits at the patch edges, which was equivalently lengthened the surface current by meandering it, This antenna uses aperture-coupled feeding structure with crossed-slot shape in order to give easy miniaturization of RHCP patch antenna. Simulated and measured results show that $42.7\%$ lower antenna size is obtained, and also $56\%$ lower -10dB bandwidth and $38.5\%$ lower 3dB AR bandwidth are obtained. when the proposed design scheme is applied to a commercial GPS antenna structure, $42.9\%$ lower patch size and $56\%$ lower 3dB AR bandwidth compared to commercial antenna at the same frequency are obtained.

• Journal of Elementary Mathematics Education in Korea
• /
• v.11 no.2
• /
• pp.177-197
• /
• 2007

This study discussed the climbing learning method which studied and practiced by Professor Saito Noboru. This is the learning method which is devised to know not only the relationship of the learning factors but the systemic or structural connection of whole studying contents- affects children's math learning ability through practical class to both the lower and the higher grades. To achieve the purpose of this study, these following issues were set; A. Develop the teaching and learning course of mathematics by applying the climbing learning method. B. Execute the mathematics lesson according to the climbing learning method and analyze the learning achievement. C. Analyze the difference between application of the climbing learning method and that of the learning method by student's level in mathematics. D. Analyze what the climbing learning method gives a shift of the recognition of learning mathematics. In order to accomplish these study issues, we analyzed the text book of math not only for children but also for teachers and developed the teaching and learning course applied the climbing learning method with advice of experts. It was chosen two different homogeneous groups each, third year for lower grade group and fifth year for higher grade group. It was done the experimental group lesson applying the climbing learning method and general lesson for the control group. After then, t-test against independent samples was done depending on the result of the student's assessment(T1, T2). These two groups' students were divided into smaller groups based on result of achievement level regardless of gender. These subgroups were confirmed the difference of learning ability between upper and lower level group. As regarding the result making out grades of faith and attitude for math, t-test was used on independent sample. At the same time, experimental groups were tested using learning attitude with the learning structure chart. Through this study the following results are obtained and the conclusion was drawn. Firstly, although applying the climbing learning method to the lesson does not have significant effect to the lower grade of elementary school student's achievement it has significant influence on the higher grade student's achievement. Second, as a result of analyzing the difference between the climbing learning method and the learning method by student's level in mathematics, it is of no beneficial effect to the lower grade both upper level and lower level. However, it has appreciable effect to the higher grade classes both upper level and low level. Especially, upper level students have higher effect than low level students. Third, climbing learning method does not affect to the faith and attitude of the lower grade students positively, but it has affirmative effect to the higher grade students'. As a result of the survey of the experimental groups which were applied to the climbing loaming method, the lesson by using the learning structure chart proved to be helpful to the both the lower and higher grade. The best advantage of using the learning structure chart, children say, is easily understood whole contents of studying and is useful for review. Furthermore, using the learning structure chart is more efficient compared with previous learning method and is given the successful result to self-directed learning. In conclusion, keeping up with the current of the thought of education, we suggest a scheme as a new teaching method from the constructive learning method which emphasize the self-directed learning.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.740-743
• /
• 2001

Sandwich structure is widely used in various fields of industry due to its excellent strength and stiffness compared with weight. We studied the sandwich structure which has honeycomb core type. We are concerned about its buckling and bending stress with respect to its side length, thickness and the height ratio of its unit core. After obtaining the buckling critical load of unit core, we applied it to the sandwich structure to observe the bending behavior. When we compared the buckling with bending stress under buckling critical load, we observed that models of which length ratio of unit honeycomb core, A, is lower than 0.04 and the thickness of core, t, is thicker than 0.09 mm, is subjected to the ultimate stress by bending before buckling.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.65-68
• /
• 2008

In this study, in order to improve luminous efficacy of AC-PDP, the new facing discharge structure has been suggested. The suggested structure has tilted facing electrode. It shows lower discharge current, higher luminance and luminous efficacy compared with those of reference structure with coplanar electrode structure.