• Korean Chemical Engineering Research
• /
• v.44 no.4
• /
• pp.329-339
• /
• 2006

The production of lower olefins from methanol becomes an attractive process because of the rapid increase in crude oil price. This paper reivews the conversion mechanisms of methanol to hydrocarbons over zeolite and SAPO molecular sieve catalysts to understand the formation steps of lower olefins from methanol. The feasibility of the conversion mechanisms such as the direct mechanism based on well-defined intermediates and the hydrocarbon pool mechanism involving hydrocarbon moieties as an active centers is discussed with reepect to the induction period, the selectivity for products and the deactivation phenomena of the methanol conversion. The literature appeered since 1999 for the structure of the hydrocarbon pool and its catalytic role in the methanol conversion are summariged, and the prospect for the methanol-to-olefins process is described.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.6
• /
• pp.1195-1198
• /
• 2008

Kinetic studies of the additions of benzylamines to a noncyclic dicarbonyl group activated olefin, methyl $\alpha$-acetyl-$\beta$ -phenylacrylates (MAP), in acetonitrile at 30.0 ${^{\circ}C}$ are reported. The rates are lower than those for the cyclic dicarbonyl group activated olefins. The addition occurs in a single step with concurrent formation of the $C_\alpha$ -N and $C_\beta$ -H bonds through a four-center hydrogen bonded transition state. The kinetic isotope effects ($k_H/k_D$ > 1.0) measured with deuterated benzylamines ($XC_6H_4CH_2ND_2$) increase with a stronger electron acceptor substituent ($\delta\sigma$ X > 0) which is the same trend as those found for other dicarbonyl group activated series (1-4). The sign and magnitude of the cross-interaction constant, ρXY, is comparable to those for the normal bond formation processes in the $S_N2$ and addition reactions. The relatively low ${\Delta}H^\neq$ and large negative ${\Delta}S^\neq$ values are also consistent with the mechanism proposed.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.5
• /
• pp.554-559
• /
• 1991

The photophysical and photochemical properties of khellin were compared with those of 8-methoxypsoralen (8-MOP). Quantum yields of fluorescence and triplet formation decreases as solvent polarity increases, which is opposite to 8-MOP, and photocycloadditivity of khellin to olefins is much lower than that of 8-MOP. Electron ejection from khellin by laser flash was not observed, but observed from 8-MOP. As models of 4',5'-monoadducts of khellin or 8-MOP with thymine base, khellin<>dimethylfumarate 4',5'-monoadduct (KDF) was also compared with 8-MOP<>thymidine 4',5'-monoadduct (F-2) in those properties to give some insight on the second-step biadduct formation resulting in cross-links of DNA duplex. KDF and F-2 were very similar to khellin and 8-MOP in photophysical properties, respectively. However, KDF did not form adducts with various olefins, and thus it is thought that 2,3-double bond of chromone moiety in khellin is hardly reactive in contrast with 3,4-double bond of coumarin moiety in 8-MOP. These results indicate that khellin is fairly photostable compound, a poor type Ⅰ photodynamic sensitizer and producer of ${O_2}^{-}$ which is some cause of phototoxic erythemal reactions and undesirable side effects. Therefore khellin is safer to use than 8-MOP in photochemotherapy of some skin diseases. Although khellin is much less reactive than 8-MOP, khellin must be also a monofunctional drug. Since khellin is, however, as effective as 8-MOP in photochemotherapy of some skin diseases, it is suggested that khellin may be different from 8-MOP in the action mechanism.

• Journal of the Korean Institute of Gas
• /
• v.23 no.6
• /
• pp.17-24
• /
• 2019

The combustion properties of the flammable substance used in industrial fields include lower/upper flash point, lower/upper explosion limit, autoignition temperature(AIT), fire point, and minimum oxygen concentration(MOC) etc.. The accurate assessment of these characteristics should be made for process and worker safety. In this study, tert-amylalcohol(TAA), which is widely used as a solvent for epoxy resins, oxidizers of olefins, fuel oils and biomass, was selected. The reason is that there are few researches on the reliability of combustion characteristics compared to other flammable materials. The flash point of the TAA was measured by Setaflash, Pensky-Martens, Tag, and Cleveland testers. And the AIT of the TAA was measured by ASTM 659E. The lower/upper explosion limits of the TAA was estimated using the measured lower/upper flash points by Setaflash tester. The flash point of the TAA by using Setaflash and Pensky-Martens closed-cup testers were experimented at 19 ℃ and 21 ℃, respectively. The flash points of the TAA by Tag and Cleveland open cup testers were experimented at 28 ℃ and 34 ℃, respectively. The AIT of the TAA was experimented at 437 ℃. The LEL and UEL calculated by using lower and upper flash point of Setaflash were calculated at 1.10 vol% and 11.95 vol%, respectively.

• Korean Chemical Engineering Research
• /
• v.51 no.2
• /
• pp.181-188
• /
• 2013

The effect of transition metal ion exchange into UZM-9 zeolite with LTA framework on its deactivation in methanol-to-olefin (MTO) conversion was discussed. The ion exchange of copper, cobalt, nickel, and iron did not induce any notable change in the crystallinity, crystal morphology, and acidity of UZM-9. The small cage entrance of UZM-9 caused the high selectivity to lower olefins in the MTO conversion, while its large cages allowed the rapid further cyclecondensation of active intermediates, polymethylbenzenes including hexamethylbenzene, resulting in a rapid deactivation. The UZM-9 containing copper and cobalt ions showed considerably slow deactivations. The interaction between transition metal ions and polymethylbenzene cation radicals, the active intermediates, generated in the MTO conversion stabilized the radicals and slowed down the deactivation of UZM-9.