• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.2
• /
• pp.242-247
• /
• 2004

Using Ar plasama and Fe-phthalocyanine, carbon nanofibers have been synthesized at a low temperature. Fe-phthalocyanine was used as a source material for this process. The carbon nanofibers were grown in random orientation with a diameter of about 100 nm and length up to 10${\mu}{\textrm}{m}$ on Si substrate. The synthesized carbon nanofibers exhibited excellent field emission characteristics. Protrusions with a nanometer size are observed at an angle of 60$^{\circ}$with respect to the nanofiber axis. Furthermore, we found the selective growth of nanofibers on a scratched substrates.

• Food Science and Biotechnology
• /
• v.17 no.6
• /
• pp.1391-1395
• /
• 2008

Leuconostoc citreum HJ-P4 is a strain isolated for kimchi fermentation with its low temperature-adapted growth feature and its high dextransucrase activity. The detailed characteristics of cell growth and dextran sucrase activities were investigated at various environmental conditions such as temperatures, pHs, salts, and raw ingredients. This strain showed almost 2-fold higher maximal cell concentration ($X_{max}$) than that of the type culture Leuconostoc mesenteroides B-512F at $10^{\circ}C$. The $X_{max}$ of the strain was maximum at pH 7 and the cell growth was inhibited by salts in a dose-dependent mode up to 7%. Addition of pepper (<6%), garlic (<10%), and ginger (<2%) in kimchi gave no inhibition effect on the growth of HJ-P4. Dextransucrase synthesized by this strain retained over 80% of its maximum activity at $10^{\circ}C$ showing a comparable cold-adapted feature to its host microbe. This culture can be used as a starter culture in the industrial kimchi production giving desirable functions and predominance at low temperature.

• Korean Journal of Metals and Materials
• /
• v.47 no.7
• /
• pp.391-396
• /
• 2009

Tensile, low cycle fatigue, and fatigue crack growth rate tests were conducted at RT and $300^{\circ}C$ for type 304 stainless steel. Tensile was tested under displacement control and low cycle fatigue was tested under strain control. Fatigue crack growth rate test was conducted under load control and crack was measured by DCPD method. Yield strength and elongation decreased at $300^{\circ}C$. Dynamic strain aging was not detected at $300^{\circ}C$. Low cycle fatigue life increased but fatigue strength decreased at $300^{\circ}C$. Fatigue crack growth rate increased at $300^{\circ}C$. Dislocation structures were mixed with cell and planar and did not change with temperature. Grain size did not change but plastic strain increased at $300^{\circ}C$. Strain induced martensite after low cycle fatigue test increased at RT but decreased at $300^{\circ}C$. It was concluded that the increase of low cycle fatigue life at $300^{\circ}C$ was due to the decrease of strain induced martensite at which crack was initiated.

• Journal of Bio-Environment Control
• /
• v.21 no.1
• /
• pp.33-38
• /
• 2012

Growth response of 'Sambokkul' watermelon grafted onto different rootstocks including 4 $Citrullus$ rootstocks and 3 other cucurbitaceous rootstocks was evaluated at two different temperature regimes. Significant reduction in plant growth rate was observed in plants grown at low temperatures (LT) as compared to those grown at normal or optimal temperatures. Relative growth reduction were 40~47% for vine length, 39~51% for total leaf area, 38~59% for shoot fresh weight, and 57~87% for plant dry weight, respectively. Watermelon rootstock PI 482322 showed comparable plant growth as the most popular rootstock 'Shintozwa' even at LT. 'Sambokkul' watermelon grafted onto watermelon hybrids, 'PI 271969 ${\times}$ PI 296341' and 'PI 271769 ${\times}$ Calhoun Gray', showed comparable plant growth as 'FR Dantos' bottle gourd rootstock. Index of growth ability at LT, which was calculated on the basis of reduced rate of vine length, dry weight and leaf area, was significantly high in $C.$ $martinezii$, 'Shintozwa', PI 482322, and 'PI 271769 ${\times}$ PI 296341' rootstocks (50% or higher) and low in own-rooted 'Sambokkul' or in watermelon plants on 'Knight' rootstock. Watermelon hybrids, 'PI 271969 ${\times}$ PI 296341' and 'PI 271769 ${\times}$ Calhoun Gray', showed better or at least comparable growth at low temperatures as compared to 'FR Dantos', confirming the feasibility of using watermelon rootstocks even in low temperature conditions.

• Journal of the Korean Society of Tobacco Science
• /
• v.11 no.2
• /
• pp.127-134
• /
• 1989

Several growth characteristics of two ornamental tobacco species, Nicotiana sanderae and N. affinis, were investigated in this study. Also effect of temperature and daylength on the flowering of the tobacco plants were evaluated to obtain basic information on breeding and cultivation. 1. The plants were great in high temperature-long day at the early stage and in low temperature-short day at the late stage of plant growth, for both Nicotana species. At the early growth stage the leaf length N. sanderae was great in high temperature-long day, and that of N. affinis was great in high temperature-short day period, while at the late stage of the plant growth the leaf lengths were more significantly effected by the temperature rather than daylength. Leaf width and leaf shape index were less sensitive to the conditions. 2. For both of the species, the total number of tobacco leaves not much influenced by the temperature and daylength. 3. There were no significant differences for budding and flowering period between the two species, both of which were sensitive to temperature and daylength with more influence by daylength than temperature. 4. Number of floral stalks, number of flower and flowering period were not much influenced by temperature and daylength; however, N. affinis had 2 more floral stalks, 31 more flowers, and 6 day longer flowering period than N. sanderae.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.3 s.33
• /
• pp.108-113
• /
• 1999

In this study, CT specimens were prepared from ASTM A516 Gr. 65 which was used for pressure vessel plates for moderate and lower temperature service. Fatigue crack growth test was carried out in the environment of low temperature of $10^{circ}C, -10^{circ}C, -30${circ}C\;and\;-50^{circ}C$ and in the range of stress ratio of R=0.05 and 0.3 by means of opening mode displacement. Based on these test results, the characteristics from temperature and stress ration were shown as follows. 1) As the stress ratio, R increased da/dN and ${Delta}K$ of 2nd stage gradually decreased. And as R decreased, the effect of temperature became greater and greater. 2) As the temperature descended, da/dN decreased on a certain ${Delta}K$, and ${Delta}K$ did in a same da/dN. And the stress ratio, R exerted greater influence at the lower temperature. 3) The fatigue crack growth constant, m increased at $10^{circ}C$ and $-10^{circ}C$, snd decreased at $-30^{circ}C$ and $-50^{circ}C$ following the increment of stress ratio R. And m increased along with the reduction of temperature greatly decreased at $-30^{circ}C$ to come close to two(2).

• Korean Journal of Environmental Agriculture
• /
• v.26 no.4
• /
• pp.325-331
• /
• 2007

A series of experiments were performed to evaluate effects of lettuce seed treatment with low temperature and dry heat treatment (DHT) on bolting response in the case of spring cultivation. During spring production in greenhouse, bolting response of the plants produced from the treated seeds was faster in the order of low temperature treatment, control and DHT. Plant height was increased 5-10 cm higher by low temperature treatment, but plant growth of some cultivars was inhibited by DHT. Difference on lettuce plant growth between low temperature treatment and DHT was gradually diminished with the lapse of time after transplanting. Fresh weight of plant was not significantly different among all treatments. 'Red Gyeolku' showed very early bolting response and plant height was significantly promoted by low temperature treatment. However, 'Cheongchima' showed low bolting percentage after various seed treatments, so it is considered late-bolting cultivar.

• Corrosion Science and Technology
• /
• v.11 no.4
• /
• pp.120-128
• /
• 2012

The fatigue crack growth behaviors of SA508 Gr.3 Cl.2 low alloy steel in high temperature water environment were investigated. Overall, weld metal showed similar crack growth rate as that of base metal. At 0.01 Hz, fatigue crack growth rate (FCGR) was higher than that in air while the difference was smaller at 0.1 Hz. Also, FCGR showed ${\Delta}K$ dependency at 0.1 Hz only, indicating that the environmental effect was much greater at slower loading frequency of 0.01 Hz. FCGR of SA508 Gr.3 Cl.2 low alloy steel was compatible to or smaller than the ASME Sec. XI fatigue reference curves in high temperature water environment.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.22 no.2
• /
• pp.151-162
• /
• 2004

MnSb layers were grown on GaAs(100), (111)A and (111)B substrates by hot wall epitaxy under various growth conditions. Growth condition dependence of structural properties of the layers was examined. The growth direction and structural properties of MnSb/GaAs(100) depend on Sb source and substrate temperatures. The smooth MnSb(10.1)/GaAs(100) interface was obtained under the appropriate growth condition. On the other hand, MnSb(00.1) layers were grown on GaAs(111) substrates. The quality of the layers on (111)B was superior to that on GaAs(111)A, but degraded as in increasing Sb source temperature during the growth. The $Mn_2Sb$ domain was generated in the layers grown under conditions of low Sb source temperature and high substrate temperature on GaAs(111) substrates.

• Horticultural Science & Technology
• /
• v.33 no.5
• /
• pp.633-637
• /
• 2015

Cucumber and paprika transplants were stored at 9, 12, 15, and $18^{\circ}C$ under dark conditions for 15 days and then grown in a greenhouse for 14 days after transplanting. To determine the effects of low storage temperature and long-term continuous darkness on the quality and vigour of transplants, we investigated the quality of transplants during storage and the growth of stored transplants after transplanting. In cucumber transplants, decreasing storage temperature reduced stem elongation and decrease in SPAD value. The quality of cucumber transplants stored at $9^{\circ}C$ was well preserved during storage, but they did not survive after transplanting due to chilling damage. Growth and development after transplanting were significantly greater when cucumber transplants were stored at $12^{\circ}C$. In paprika transplants, the quality of transplants did not significantly differ before and after storage. After transplanting, there was no significant difference in the survival rate and growth, but the number of flower buds was greater in the paprika transplants stored at lower temperatures (9 and $12^{\circ}C$). These results indicate that the responses of transplants to the conditions of low temperature and darkness differed between cucumber and paprika, and storage temperature in darkness must be controlled carefully considering species-specific responses to reduce quality deterioration during storage and improve the recovery of transplants after transplanting.