• 한국세라믹학회지
• /
• 제33권11호
• /
• pp.1245-1252
• /
• 1996

The charcteristics for the copper-contained spinel ferrites such as NiCu-and ZnCu ferrites with various copper content are investigated in this study which can provide a explanation for the behavior of copper in sintering at a low temperatuer. The bulk density and the grain size for these sintered ferrites were increased with the larger amount of copper in compositions. In microstructure of copper-contained spinel ferrites copper exists in the grain boundary which is sintering process. Electrical resistivity and frequency range with maximum Q-facor of NiCu-or ZnCu ferrites were decreased as increasing of copper content in ferrite composition.

• 한국세라믹학회지
• /
• 제35권1호
• /
• pp.97-105
• /
• 1998

20mol% Gd-doped CeO2 ultrafine powders as a promising electrolyte for the low temperature solid ox-ide fuel cells were synthesized with particle sizes of 15-20 nm using glycine nitrate process(GNP) fol-lowed by sintering their pellets at 150$0^{\circ}C$ for various times in air and then the electrical properties of the sintered pellets were investigated. The sintering behaviors and electrical properties for the sintered 20 sintered mol% Gd-doped CeO2 pellets were analyzed using dilatometer and SEM and AC two-terminal impedance technique respectively. As the heating temperature increased the synthesized powder had the sintering behaviors to show the start of the significant shrink at temperature of about $700^{\circ}C$ and to show the end of the shrink at the temperature of about 147$0^{\circ}C$. When the pellets were sintered with the vaious times at 150$0^{\circ}C$ the temperatuer which the shrink had been already completed the grain sizes in the sintered 20 mol% Gd-doped GeO2 pellets increased with the increase of the sintering time but their electrical resis-tivities showed the minimum value at the sintering time of 10h. It is due that the pellet sintered for 10h had the minimum activation energy fior the electtrical conduction. Thus it is thought that the decrease of the activation energy with the increase of the sintering time to 10h is induced by the enhanced mi-crostructure like the decrease of pore amount and the grain growth and its increase with the sintering times more than 10h is induced by the increase of the amounts of the impurities such as Mg. Al and Si from the sintering atmosphere.

• 한국건설순환자원학회논문집
• /
• 제11권1호
• /
• pp.9-15
• /
• 2023

시멘트는 대표적인 이산화 탄소 배출 산업이다. 에너지 소비와 CO₂ 배출 저감을 위해 제조 공정 개선 및 대체 재료의 사용확대가 필요하다. 따라서 본 연구는 CO₂ 흡착형 재료인 CAF을 저온 소성하여 시멘트에 적용하여 시멘트 수화의 기본 특성을 확인하였다. 합성 CAF의 수화 생성물에 대한 결정상 분석과 공극 분포, 그리고 구조 이미지를 확인하고, 압축강도를 측정하였다. SCAF는 치환율은 10, 20, 100 %으로 하였으며, 치환율의 증가에 따라 압축강도는 저하되는 경향을 보인다. 또한, SCAF 치환율 100%인 경우, 초기 재령의 수화 생성물은 calcium aluminum oxide hydrate (Ca₃Al₂O₆·xH₂O)와 calcium iron hydroxide (Ca₃Fe(OH)₁₂)이며, 치환율 10, 20 %에서는 일반적인 시멘트 수화물 외에 CAF 화합물인 Brownmillerite가 관찰되었다. 또한, 공극율은 치환율의 증가에 따라 공극 크기가 크고 공극율이 높았다. 본 연구 결과 저온 소성으로 제조된 CAF는 CO₂ 흡착형 재료로 활용을 위해 단독 사용 및 일반 양생은 어려울 것으로 보인다.