• 제목/요약/키워드: Low-power wireless communication

검색결과 517건 처리시간 0.03초

A 1.2-V Wide-Band SC Filter for Wireless Communication Transceivers

  • Yang, Hui-Kwan;Cha, Sang-Hyun;Lee, Seung-Yun;Lee, Sang-Heon;Lim, Jin-Up;Choi, Joong-Ho
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제6권4호
    • /
    • pp.286-292
    • /
    • 2006
  • This paper presents the design of a low-voltage wide-band switched-capacitor (SC) filter for wireless communication receiver applications. The filter is the 5th-order Elliptic lowpass filter. With the clock frequency of 50MHz implying that an effective sampling frequency is 100MHz with double sampling scheme, the cut-off frequency of the filter is programmable to be 1.25MHz, 2.5MHz, 5MHz and 10MHz. For low-power systems powered by a single-cell battery, the SC filter was elaborately designed to operate at 1.2V power supply. Simulation result shows that the 3rd-order input intercept point (IIP3) can be up to 27dBm. The filter was fabricated in a $0.25-{\mu}m$ 1P5M standard CMOS technology and measured frequency responses show good agreement with the simulation ones. The current consumption is 34mA at a 1.2V power supply.

소출력 무선 수신기의 부차적 전파발사 규정에 관한 연구 (A Study on the Technical Regulation for Spurious Emission of Weak Field Strength Radio Receiver)

  • 김선엽;박형근
    • 한국산학기술학회논문지
    • /
    • 제13권2호
    • /
    • pp.790-794
    • /
    • 2012
  • 소출력 무선설비로부터 발사되는 전파로 인한 혼신으로부터 다른 무선국을 보호하기 위해 사용 주파수에 따라 출력 강도를 제한하고 있으며, 수신기의 경우에는 불요 발사 전력을 규제하고 있는데, 국내의 경우에는 1GHz이하의 소출력 무선설비의 수신기의 부차적인 전파 전력에 관한 규정은 -54dBm으로 규정되어, 1GHz 이상의 소출력 무선설비의 경우에는 아직 그 규정이 마련되어 있지 않고 있다. 현재 1GHz 이상의 기기들이 통신시장의 확대로 인해 서비스가 증가하고 있어 국내 기준이 필요 상태이다.

Wireless safety monitoring of a water pipeline construction site using LoRa communication

  • Lee, Sahyeon;Gil, Sang-Kyun;Cho, Soojin;Shin, Sung Woo;Sim, Sung-Han
    • Smart Structures and Systems
    • /
    • 제30권5호
    • /
    • pp.433-446
    • /
    • 2022
  • Despite efforts to reduce unexpected accidents at confined construction sites, choking accidents continue to occur. Because of the poorly ventilated atmosphere, particularly in long, confined underground spaces, workers are subject to dangerous working conditions despite the use of artificial ventilation. Moreover, the traditional monitoring methods of using portable gas detectors place safety inspectors in direct contact with hazardous conditions. In this study, a long-range (LoRa)-based wireless safety monitoring system that features the network organization, fault-tolerant, power management, and a graphical user interface (GUI) was developed for underground construction sites. The LoRa wireless data communication system was adopted to detect hazardous gases and oxygen deficiency within a confined underground space with adjustable communication range and low power consumption. Fault tolerance based on the mapping information of the entire wireless sensor network was particularly implemented to ensure the reliable operation of the monitoring system. Moreover, a sleep mode was implemented for the efficient power management. The GUI was also developed to control the entire safety-monitoring system and to manage the measured data. The developed safety-monitoring system was validated in an indoor testing and at two full-scale water pipeline construction sites.

군 이동기지국시스템(MSAP) 통합전원제어장치 배터리 충전용 1.5kVA급 무선전력전송기기의 설계 (Design of the 1.5kVA Class Wireless Power Transfer Device for Battery Charging of Integrated Power Control System in MSAP)

  • 김진성;김병준;박현정;서민성
    • 한국전자통신학회논문지
    • /
    • 제15권3호
    • /
    • pp.413-420
    • /
    • 2020
  • 군 전술정보통신체계(TICN: Tactical Information and Communication Network)는 이동기지국시스템(MSAP: Mobile Subscriber Access Point)을 활용하여 음성 및 데이터 등 실시간 멀티미디어 서비스를 제공한다. 이때 소용량 무선전송체계와 대용량 무선전송체계를 통해 외부전송로를 구성하게 된다. 각 무선전송체계의 통신기기들은 전술차량에 탑재되고 전술차량에 공급전원이 통합전원제어장치로 절체 될 때 전원차단을 예방하기 위해 2차전지가 사용된다. 본 논문은 이동기지국시스템 통합제어장치 배터리 충전용 무선전력전송기기를 장하분배법을 이용하여 기본 설계하고 공극에 의한 설계 변수인 1차 측 권선 수와 코어 재질선정을 FEM(Finite Elements Method) 해석을 통해 확인하였다.

원격검침을 위한 저 전력 무선 디지털 수도계량기 (Wireless Digital Water Meter with Low Power Consumption for Automatic Meter Reading)

  • 이영우;오승엽
    • 한국정보통신학회논문지
    • /
    • 제12권5호
    • /
    • pp.963-970
    • /
    • 2008
  • RFID/USN 기술을 이용하여 각종 계량기를 원격으로 검침하려는 시도가 계속되고 있다. 수도 검침의 경우 아직 무선으로 원격 검침하는 체계가 발표되었거나 상용화되지 못하였다. 본 논문에서는 원격검침을 위한 디지털 수도 계량기의 설계 및 구현을 기술한다. 자기장을 감지하는 홀 센서를 사용하여 검침하고 그 결과를 ZigBee 무선으로 게이트웨이에 전송한다. 배터리만으로 계량기의 내구연한을 견뎌야 하므로 저전력 설계가 필수적이다. 구현된 계량기의 전력 소모량을 분석하여 3V, 3000mAh 용량 배터리, 2개로 8년의 내구연한을 견딜 수 있음을 보였다.

해상실험을 통한 저전력 수중음향통신 기법의 성능 분석 (Performance Analysis of the Underwater Acoustic Communication with Low Power Consumption by Sea Trials)

  • 이태진;김기만
    • 한국항해항만학회지
    • /
    • 제35권10호
    • /
    • pp.811-816
    • /
    • 2011
  • 이 논문에서는 저전력 통신 기법 가운데 하나인 PSPM(Phase Shift Pulse position Modulation) 전송 기법이 근거리 수중음향 채널에서 어떠한 성능을 나타낼지 고찰하기 위해 해상실험을 통해 분석하였다. PSPM은 QPSK(Quadrature Phase Shift Keying)와 PPM(Pulse Position Modulation) 기법을 서로 혼합한 형태로 WBAN(Wireless Body Area Network) 시스템에서 저전력 통신을 위해 제안된 기법이다. 이는 기존의 일반적인 전송 방식에 비해 대역효율은 떨어지지만 전력효율은 증가하는 것으로 알려져 있다. 이 논문에서는 실해역에서 취득한 PSPM 데이터를 통해 BER 성능을 분석한다. 실험 결과 QPSK의 경우 총 56,000개의 전송 데이터 비트 중 오차 비트 수가 3,384개로 BER이 약 $6.04{\times}10^{-2}$이고, PSPM의 경우는 19,652개로 BER이 약 $3.5{\times}10^{-1}$를 얻었다. 또한 영상 데이터 전송에 따른 PSNR(Peak signal-to-noise ratio)을 비교한 결과 QPSK의 경우 9.37 dB 였으며, PSPM의 경우 9.11 dB 였다.

무선 통신용 Dual-Modulus Prescaler 위상고정루프(PLL)의 간단한 분주 구조 (Simple Dividing Architecture of Dual-Modulus Prescaler Phase-Locked Loop for Wireless Communication)

  • 김태우;이순섭;최광석;김수원
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 1999년도 추계종합학술대회 논문집
    • /
    • pp.271-274
    • /
    • 1999
  • This paper proposes a simple architecture of digital dividing block in dual-modulus prescaler phase-locked loop used in the wireless communication. Proposed architecture eliminates a swallow counter in the conventional one and demonstrates the advantages in reducing the power consumption and the gate-counts. Therefore, it is suitable for small die area and low power applications. The circuit is designed in a standard 0.35${\mu}{\textrm}{m}$ CMOS process.

  • PDF

지능형 LED 조명 시스템의 신뢰성 확보를 위한 유무선 이중망 통합 인터페이스 구현 (Implementation of Integrated Interface based on Wire and Wireless Dual Network for Ensuring the Reliability of Intelligent LED Lighting System)

  • 이운선;박태진;박만곤
    • 전기학회논문지
    • /
    • 제63권2호
    • /
    • pp.306-312
    • /
    • 2014
  • The ZigBee communication method, which is the most frequently applied to the LED lighting control system, has drawbacks of low-speed and low-capacity, and the communication failure possibility due to environmental influences is on the rise. Therefore, it is important to secure the communication reliability by applying an integrated interface with a wire-wireless dual-network. This paper developed a communication module, which has a platform converging and combining the ZigBee of USN environments with the PLC of power line communication environments, to implement a dualized communication interface system supporting the wire-wireless integrated protocol, and implemented a wire-wireless networking device and a control system software technology. As a result, it was automatically switched into the PLC communication within 4.4 seconds on average when there was an access failure in the ZigBee communication network, so a reliable communication network was built.

Adaptive GTS allocation scheme with applications for real-time Wireless Body Area Sensor Networks

  • Zhang, Xiaoli;Jin, Yongnu;Kwak, Kyung Sup
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제9권5호
    • /
    • pp.1733-1751
    • /
    • 2015
  • The IEEE 802.15.4 standard not only provides a maximum of seven guaranteed time slots (GTSs) for allocation within a superframe to support time-critical traffic, but also achieves ultralow complexity, cost, and power in low-rate and short-distance wireless personal area networks (WPANs). Real-time wireless body area sensor networks (WBASNs), as a special purpose WPAN, can perfectly use the IEEE 802. 15. 4 standard for its wireless connection. In this paper, we propose an adaptive GTS allocation scheme for real-time WBASN data transmissions with different priorities in consideration of low latency, fairness, and bandwidth utilization. The proposed GTS allocation scheme combines a weight-based priority assignment algorithm with an innovative starvation avoidance scheme. Simulation results show that the proposed method significantly outperforms the existing GTS implementation for the traditional IEEE 802.15.4 in terms of average delay, contention free period bandwidth utilization, and fairness.

상용 자기유도방식 무선전력전송 시스템의 인체영향 분석 (Human Effect for Commercial Wireless Power Transfer System Operating at Low Frequency)

  • 강준석;이승우;홍익표;조인귀;김남
    • 한국전자파학회논문지
    • /
    • 제28권5호
    • /
    • pp.382-390
    • /
    • 2017
  • 본 논문에서는 저주파 대역 자기유도방식 상용 무선충전기기에 대해 특정 노출 조건을 고려하여 인체영향을 평가하였다. 상용 무선충전기기는 WPC(Wireless Power Consortium)에서 제안하는 Qi 규격 중 A10 모델을 대상으로 했으며, 155 kHz의 공진 주파수에서 5 W의 출력으로 동작한다. 송 수신기가 완벽히 정렬된 상태에서, 기기로부터 방사되는 누설 자기장은 기기의 측면에서 최대 $257.58{\mu}T$로 ICNIRP 2010 기준인 $27{\mu}T$보다 7.4배 초과하는 세기를 보였다. SAR(Specific Absorption Rate)는 젖은 피부의 전기적 상수를 적용한 균질 인체팬텀을 이용해 평가하였으며, 마찬가지로 기기의 측면에서 대략 $134.47{\mu}W/kg$으로 최댓값을 보였지만, 10 g 평균 SAR 국제 기준인 4 W/kg에 상당히 못 미치는 수준이었다. 오정렬 상태를 고려한 노출 조건에서 SAR는 대략 $199.43{\mu}W/kg$으로 일반적 노출 조건보다 대략 48 % 이상 증가했고, 이를 통해 무선전력전송 시스템의 인체영향을 평가할 때 오정렬 상태 또한 중요하게 고려할 필요가 있음을 확인하였다.