• Proceedings of the Korea Water Resources Association Conference
• /
• 한국수자원학회 2008년도 학술발표회 논문집
• /
• pp.1599-1603
• /
• 2008

발전소 냉각수 배수로에는 유속 2 m/s 이상의 빠른 흐름의 수로가 존재하여 수력발전을 꾀할 수 있어, 하동화력의 경우 조류발전 수차인 헬리컬 수차를 이용한 수력 개발이 진행 중이다. 하동화력 배수로는 약 630 m의 암거와 약 250 m의 개수로로 이루어져 있는데, 현재 상업용 발전설비 개발을 위해 시험용 수차발전 설비를 개수로로 이어지는 암거 출구부에 설치하여 성능 시험을 추진하고 있다. 이에 본 연구에서는 발전 설비의 설치로 인한 수위 증가가 냉각수 순환 계통에 미치는 영향을 파악하기 위하여 배수로 구간의 수위변화 또는 압력변화를 수치해석을 통해 분석하였다. 배수로 암거 출구부에 가로 3.6 m ${\times}$ 세로 1.5 m 헬리컬 수차 1 set를 설치하는 경우 저조시에는 seal well 후단(하류측)의 수위가 seal well의 위어 정부표고를 넘지 않아 수차구조물에 의한 압력변화가 상류로 미치는 영향이 없었다. 그러나 고조시에는 seal well 전 후단이 만관 관수로 흐름이 되어 하류의 압력변화가 상류로 전파되었다. 단, 수차구조물을 설치한 경우 순환수 펌프를 처음 기동할 때 압력파의 전파로 인해 초기 약 10 분간 불안정한 압력변화가 발생하나 수차구조물 설치 전인 현상태에서 발생하는 압력변화 범위를 벗어나지는 않고 이내 안정되며, 수차구조물 설치로 인한 수위 증가분만큼의 펌프 양정고 증가로 소요 동력이 증가할 수 있으나 0.2 m 내외의 미약한 증가이므로 정상 운전에는 문제가 없을 것으로 판단되었다. 따라서 수차구조물 설치 시, 저조시에는 순환수계통에 영향을 주지 않으며, 고조시에도 일부 시간 동안 미약한 수두변화만 있을 뿐 순환수 계통의 안전에는 지장을 주지 않을 것으로 확인되었다.

• Korean Journal of Optics and Photonics
• /
• 제20권3호
• /
• pp.143-147
• /
• 2009

We propose an asymmetrical 2.5 Gbps / 622 Mbps bidirectional optical subscriber network with Manchester coded downstream and NRZ (Non-Return-to-Zero) upstream remodulation. The proposed system has important characteristics in the optical network unit (ONU): it does not require a light source or the usual control circuits such as wavelength control and output power control, and it is possible to use a synchronization scheme between upstream and downstream data. We theoretically analyze BER(Bit Error Rate) performance of upstream data remodulated with Manchester coded downstream according to the types of NRZ downstream data and perform simulations with MATLAB. The BER performance and the receiver sensitivity have been improved by 3 dB by adjusting threshold levels compared to the conventional receiver. The results have shown the remodulation scheme with Manchester coded downstream could be a useful technology for asynchronous and asymmetric optical subscriber networks with low cost and simple structures.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1328-1333
• /
• 2005

This paper presents the temperature-pressure characteristics of a new SMH actuator using a Peltier module. The SMH actuator is characterized by its small size, low weight, noiseless operation, and compliance similar to that of the human body. The simple SMH actuator, consisting of the plated hydrogen-absorbing alloys as a power source, Peltier elements as a heat source, and a cylinder with metal bellows as a functioning part has been developed. To improve the thermal conductivity of the hydrogen-absorbing alloy, an assembly of copper pipes has been used. It is well known that hydrogen-absorbing alloys can reversibly absorb and desorb a large amount of hydrogen, more than about 1000 times of their own volume. The hydrogen equilibrium pressure increases when hydrogen is desorbed by heating of the hydrogen-absorbing alloys, whereas by cooling the alloys, the hydrogen equilibrium pressure decreases and hydrogen is absorbed. The new special metal hydride (SMH) actuator uses the reversible reaction between the heat energy and mechanical energy of a hydrogen absorbing alloys. The desirable characteristics of SMH actuator, which makes it suitable for the uses in medical and rehabilitation applications, have been also studied. For this purpose, the characteristics of the new SMH actuator for different temperature, pressure, and external load were explored.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• 제43권10호
• /
• pp.118-125
• /
• 2006

A new error amplifier is presented for fast transient response of DC-DC converters. The amplifier has low quiescent current to achieve high power conversion efficiency, but it can supply sufficient current during large signal operation. Two comparators detect large-signal variations, and turn on extra current supplier if necessary. The amount of extra current is well controlled, so that the system stability can be guaranteed in various operating conditions. The simulation results show that the new error amplifier achieves significant improvement in transient response than the conventional one.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• 제47권2호
• /
• pp.48-53
• /
• 2010

RC(Remote Control) is a technology that can efficiently control and transfer a variety of user commands to CEs. However, the existing RCs have been required various additional features such as communication between CEs, extension of communication range, low power-consumption and bi-directional communication according to the advent of new types of CE devices and its enhanced performance. Even though RC controller has many customers' requests, it is not a simple solution because most legacies work on IR-based RC. In this paper, we propose RF4CE-based Universal Remote Control Framework using Smartphone in order to solve the many constraints of IR legacies. The proposed R-URC system is designed by RF4CE platform which is a kind of de-facto standard for CE remote control communication. From the verification scenarios using various CEs and smart phone, we can see that the proposed R-URC shows the good practical usage in terms of contents sharing and smart CE control.

• Smart Structures and Systems
• /
• 제17권3호
• /
• pp.471-489
• /
• 2016

Modal identification based on ambient vibration data has attracted extensive attention in the past few decades. Since the excitation for ambient vibration tests is mainly from the environmental effects such as wind and traffic loading and no artificial excitation is applied, the signal to noise (s/n) ratio of the data acquired plays an important role in mode identifiability. Under ambient vibration conditions, certain modes may not be identifiable due to a low s/n ratio. This paper presents a study on the mode identifiability of an instrumented cable-stayed bridge with the use of acceleration response data measured by a long-term structural health monitoring system. A recently developed fast Bayesian FFT method is utilized to perform output-only modal identification. In addition to identifying the most probable values (MPVs) of modal parameters, the associated posterior uncertainties can be obtained by this method. Likewise, the power spectral density of modal force can be identified, and thus it is possible to obtain the modal s/n ratio. This provides an efficient way to investigate the mode identifiability. Three groups of data are utilized in this study: the first one is 10 data sets including six collected under normal wind conditions and four collected during typhoons; the second one is three data sets with wind speeds of about 7.5 m/s; and the third one is some blind data. The first two groups of data are used to perform ambient modal identification and help to estimate a critical value of the s/n ratio above which the deficient mode is identifiable, while the third group of data is used to perform verification. A couple of fundamental modes are identified, including the ones in the vertical and transverse directions respectively and coupled in both directions. The uncertainty and s/n ratio of the deficient mode are investigated and discussed. A critical value of the modal s/n ratio is suggested to evaluate the mode identifiability of the deficient mode. The work presented in this paper could provide a base for the vibration-based condition assessment in future.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권4호
• /
• pp.2276-2291
• /
• 2017

Data protection of removable storage devices is an important issue in information security. Unfortunately, most existing data protection mechanisms are aimed at protecting computer platform which is not suitable for ultra-low-power devices. To protect the flash disk appropriately and efficiently, we propose a trust based USB flash disk, named UTrustDisk. The data protection technologies in UTrustDisk include data authentication protocol, data confidentiality protection and data leakage prevention. Usually, the data integrity protection scheme is the bottleneck in the whole system and we accelerate it by WH universal hash function and speculative caching. The speculative caching will cache the potential hot chunks for reducing the memory bandwidth pollution. We adopt the symmetric encryption algorithm to protect data confidentiality. Before mounting the UTrustDisk, we will run a trusted virtual domain based lightweight virtual machine for preventing information leakage. Besides, we prove formally that UTrustDisk can prevent sensitive data from leaking out. Experimental results show that our scheme's average writing throughput is 44.8% higher than that of NH scheme, and 316% higher than that of SHA-1 scheme. And the success rate of speculative caching mechanism is up to 94.5% since the access pattern is usually sequential.

• Journal of Home Health Care Nursing
• /
• 제3권
• /
• pp.98-110
• /
• 1996

As the health of people is a integral element of the public well-being, the government adopted and put the home visiting nurse system into practice from Jan. 1990, so that the public might get the necessary health service at the low cost and at home. Thus, it resulted in a rapid increase of the public need for the quality of life. The increasing demand for home care created a necessity for an increased man-power like home care nurse. Since the demand of the publics‘ home care has increased, Seoul Nurses’ Association, one of the branches of Korean Nurses Association has developed for the project team of Home Visiting Nurses Activities. The purpose of this study will analyzed and classified home nursing care activities of home visiting nurse according to the criteria of nursing diagnosis Korean Nurses‘ Association. The subject of the study was 54 patients in 1993 and 148 patients in 1994. All patients received home care at home from visiting nurses were living in Seoul city. The results of the study were as follows; 1) With regard to the nursing diagnosis, 24 items were classified. 2) The patients and families wanted to increase the number of time for home visiting. 3) Main sources of request to visit the patients at home were mainly from the families through nurses or doctors who cared for the patients. 4) In comparison of the characteristics visiting activities between 1993 and 1994, the number of the classification of nursing diagnosis and the number of visiting activities in 1994 were relatively increased than the outcomes in 1993.

• Journal of Radiation Protection and Research
• /
• 제41권2호
• /
• pp.161-165
• /
• 2016

Background: Radiation accidents having occurred in recent containing the accident in Fukushima nuclear power plants of Japan were resulted to the increase in some public concern, anxiety and confusion for radiation or nuclear safety. The public anxiety for radiation is not being decreased though the announcements done in radiation research institutes in Korea. Therefore, this study aims at providing an effective system for radiation publicity to the public members by the clipping analysis for the radiation articles reported in the media. And, the relation between those radiation issues and the radiation perception to the public members is analyzed. Materials and Methods: The radiation articles reported by them in 2013 and 2014 have been collected, and they are then classified with the article characteristic, field and tendency. Classified articles have been reviewed by dividing as two year. The 210 articles have been compared for their tendencies, characteristics and fields by year reported, and their characteristic comparison by reported year are then reviewed. Results and Discussion: Though the frequency that the radiological accidents have occurred in worldwide is far low compared to the accidental frequencies occurred in the general industrial fields, the radiation perception is being still deteriorated because of its special problem, which is defined as exposure, contamination or radioactivity, about radiation. The basic principles for radiation communication were suggested for preventing some unnecessary misunderstanding due to the variation of understanding for radiation issues. Conclusion: It is necessary to perform a variety of strategies for the publicity in improving the radiation perception, to build a relationship with the press or the media and then to consistently interact with them. Radiation communication must be performed by radiation experts or complete charge department, and must be consistently performed and be taken predictable patterns.

• Journal of Hydrogen and New Energy
• /
• 제29권4호
• /
• pp.339-356
• /
• 2018

Although fuel cell systems have advantages in terms of electric efficiency and environmental impact compared with conventional power systems, fuel cell systems have not been deployed widely due to their low reliability and high price. In order to guarantee the lifetime of 10 years, which is the commercialization goal of Polymer electrolyte fuel cells (PEFCs), it is necessary to improve durability and reliability through optimized operation and maintenance technologies. Due to the complexity of components and their degradation phenomena, it's not easy to develop and apply the diagnose and prognostic methodologies for PEFCs. The purpose of the paper is to show the current state on PEFC prognostic technology for condition based maintenance. For the prognostic of PEFCs, the model driven method, the data-driven, and the hybrid method can be applied. The methods reviewed in this paper can contribute to the development of technologies to reduce the life cycle cost of fuel cells and increase the reliability through prognostics-based health management system.