• 한국정보통신학회논문지
• /
• 제21권7호
• /
• pp.1455-1463
• /
• 2017

세계경기가 저성장, 저소비, 높은 실업률, 고위험, 짧은 호황 긴 불황 등을 기록하고 있다. 이에 따라 해운경기가 하락하여 선박 유지비용의 절감이 불가피해지고 있다. 이를 위해 그린 선박, 에코 선박, 스마트 선박과 같은 선박의 에너지를 절감하기 위한 연구가 활발히 진행 중에 있다. 친환경 선박에서 배터리를 사용하는 전력관리시스템은 중요한 연구분야 중 하나이다. 본 논문에서는 발전기만을 사용하는 일반적인 선박의 전력관리시스템의 중부하 제어를 분석하고 배터리 연계형 전력관리시스템에서 중부하를 제어하는 알고리즘을 연구하였다. 이를 위해 배터리 연계형 전력관리시스템의 구성을 제안하고 제안된 시스템을 기반으로 배터리 연계형 전력 시뮬레이터를 구성하였다. 구성된 시뮬레이터를 통해 배터리 연계형 전력관리시스템에서 중부하 제어에 따른 배터리의 동작을 정의하고 이를 확인하였다.

• Journal of Electrical Engineering and Technology
• /
• 제8권1호
• /
• pp.137-143
• /
• 2013

This paper presents development of variable speed generation (VSG) system with energy saving function. The rubber tyred gantry crane (RTGC) requires the power from diesel-engine. Significant fuel savings by reducing the engine speed can be achieved, because all of operation modes except hoisting are required lower power than rated value of engine. When low speed operation output voltage of generator is decrease until acceptable range of motor driver inverters and auxiliary load supplier. According to power demand engine speed is varying from 20 to 60Hz, and voltage is varying between 210Vac and 480Vac. When idle mode or low power operation dc/dc converter operates by constant output voltage control and inverters dc site voltage is compensated by it. This paper proposed 3-phase interleaved boost converter which has the same structure as the commercially available 3-phase inverter and current sharing capability. 400kW interleaved converter is designed and a performance of converter is evaluated through several experiments with a RTGC system. Energy saving VSG system can cut down fuel consumption by 36% and 21.3% at idle and unidirectional load operations.

• 전기학회논문지P
• /
• 제64권1호
• /
• pp.29-34
• /
• 2015

DC bus electrolytic capacitors are used in variety of equipments as smoothing element of the power converters because it has high capacitance for its size and low price. It is responsible for frequent breakdowns of many static converters and inverter drive systems. Therefore it is important to diagnosis monitoring the condition of an electrolytic capacitor in real-time to predict the failure of power converter. In this paper, the on-line remote diagnosis monitoring system for DC BUS electrolytic capacitors of power converter using low-cost type Zigbee communication modules is developed. To estimate the health status of the capacitor, the equivalent series resistor(ESR) of the component has to be determined. The capacitor ESR is estimated by using RMS computation using AC coupling method of DC link ripple voltage/current. The Zigbee communication-based experimental results show that the proposed remote DC capacitor diagnosis monitoring system can be applied to DC/DC converter and UPS successfully.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(5)
• /
• pp.67-70
• /
• 2002

In this paper, we have researched a Automatic Power Factor Correction and THD reduction System for the multiple connection of CFL. Also in this paper, the power factor has been researched for the design of CFL, found the reason why the power factor is low and THD is too high. This paper has designed the PFC System for the multiple connection of CFL, and then we have increased the power factor and reduced the total harmonic distortion, by implementing them.

• 대한임베디드공학회논문지
• /
• 제2권1호
• /
• pp.24-30
• /
• 2007

According to development of wireless communication technologies, we need not only high data rate but low data rate system of low power consumption. This low data rate system is utilized in the field of home automation, health care, sensoring and monitoring, etc. IEEE 802.15.4 LR-WPAN system is the best choice for realizing ubiquitous networking system. In this paper SoC Architecture for IEEE 802.15.4 Low Rate WPAN is designed. IEEE 802.15.4 Low Rate WPAN system serves the functions and realization of home area network. We propose the SoC architecture for 868/915MHz frequency band of IEEE 802.15.4 Low Rate WPAN system. The key issue is to design SoC architecture which provides the function of Low Rate WPAN system to meet the requirement of IEEE 802.15.4 standards.

• 융합신호처리학회논문지
• /
• 제25권1호
• /
• pp.33-38
• /
• 2024

제품간 또는 시스템간을 서로 연결하는 커넥티드 기술의 중요성이 커지고 있다. 커넥티드 기술은 주변 사물들과 소통하고 네트워크로 서로 연결되어 하나의 시스템처럼 동작시킬 수 있는 개념이다. 특히 무선 통신을 이용하여 구현할 수 있으며 통신거리, 속도 등 적용 시스템에 따라 다양한 조건이 요구된다. 본 연구에서는 자율주행차, 드론, UAV, 공유이동수단 등 모빌리티 장치간의 커넥티드 구현을 위한 통신 기술 동향을 분석하였다. 현재 상용화되거나 개발 중인 최신 통신 방식의 통신거리, 속도, 유무선여부 등을 조사하였으며, 특히 저전력 동작 여부에 중점을 두어 분석하였다. 저전력원거리통신(LPWAN) 시스템 구축에 필요한 요소기술이 무엇인지 도출하였으며, 1차적으로 드론 커넥티드 구성을 위한 방안을 도출하였다. 분석결과 LoRa 시스템을 활용한 커넥티드 시스템 구현이 가능함을 보였으며, 구성방안 예시안을 제시하였다.

• Journal of Power Electronics
• /
• 제10권4호
• /
• pp.382-387
• /
• 2010

This paper presents a novel design method for determining the PID gains of a speed controller for a servo system compensating variations in bandwidth at a low speed. The variations in bandwidth of a speed controller are measured at a low speed and the relationship between the bandwidth and the damping ratio are verified by determining the location of the closed loop pole. The proposed algorithm uses the z-transform of a plant and speed controller and applies the time-varying sampling method for determining the PID gains of the speed controller at low speed. The magnitude and the phase condition are considered for finding a suitable control gain. The usefulness and effectiveness of the proposed method is demonstrated through experimental results such as low speed control and robust disturbance responses.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 전력전자학술대회
• /
• pp.504-505
• /
• 2011

Decreasing actual greenhouse gas will be difficult if it is not solved addressed in architectural fields. Zero emission building or zero energy building, maximize the efficiency of energy, which means the building can operate by their own renewable energy facility without any other supplying. To be a zero emission building, a building needs realization of high efficiency low energy consumption, construction of building its own energy production facilities and lastly a power grid connection. According to increasing of DC load about TV, LED lighting, computer, IT in building for living and business, it is expected the save of energy when the system of AC power distribution change into the system of DC power distribution. Renewable energy exists a big different rate produced by outside environment. When electrical power overproduce, it can supply for system. Otherwise, if electrical power produce less, it can receive supply from system. Send and receive power can lead to zero to annual standard. This paper shows the simulation about efficient control of power conversion which is related to DC power distribution of architecture and DC output of renewable energy by using L-type converter.

• 전기학회논문지P
• /
• 제67권3호
• /
• pp.155-159
• /
• 2018

Recently, the expansion or establishment of facilities for the logistics system is increasing. Conveyor facilities play a major role in sorting and transporting logistics. Induction motors are widely used for the operation of these conveyor systems. In the logistics system, a large number of induction motors are used. These motors have a considerable distance from the power source side and have a low power factor. The installation position for the power factor compensation of the induction motor is very important. Since the voltage drop depends on the length of the line, it is an important parameter in capacitor capacity determination for power factor compensation. The capacity of the capacitors installed to compensate the power factor of the inductive load should be designed to the extent that self-excitation does not occur. In this study, we analyze the method of compensating the proper power factor considering the voltage drop and the installation position of the induction motor in the logistics system.

• 전력전자학회논문지
• /
• 제22권1호
• /
• pp.75-81
• /
• 2017

This paper presents a design and parallel control strategy of 1.8 kW low-voltage DC-DC converter (LDC) for mild hybrid electric vehicles to improve their power density, system efficiency, and operation stability. Topology and control scheme are important on the LDC for mild hybrid electric vehicles to achieve high system efficiency and power density because of their very low voltage and large current in input and output terminals. Therefore, the optimal topological structure and control algorithm are examined, and a detailed design methodology for the power and control stages is presented. A working sample of 1.8 kW LDC is designed and implemented by applying the adopted topology and control strategy. Experimental results indicate 92.45% of the maximum efficiency and 560 W/l of power density.