• Journal of the Korean Society of Hazard Mitigation
• /
• v.5 no.1 s.16
• /
• pp.13-21
• /
• 2005

Experiments on settling behaviour of fine-grained particles without destroying the large fragile aggregates were carried out in still water with a CCD (Charged Coupled Device)-Camera. The experiments dealt with the measuring of the vertical concentration profile of cohesive particles with a CCD-Camera and the physico-chemical influences (NaCl, density, temperature and pH value) on the vertical distribution of the concentration. The vertical concentration profile of fine suspended particles (alumina and quartz) was possible up to $20,000\;mg/{\ell}$ with a CCD-Camera. The vertical concentration profile of cohesive sediments was on the decrease because of the increasing initial concentration, temperature and salinity. The vertical concentration profile of alumina was on the decrease quicker than quartz with increasing salinity. Furthermore, the pH value affects the settling behaviour of alumina. At a PH value of 4.2 the settling rate of the particles was very low and on the increase until pH 8.9 because of the aggregation behaviour of particles. From the PH value of 9 the average settling velocity was on the decrease.

• Journal of the korean society of oceanography
• /
• v.39 no.4
• /
• pp.234-242
• /
• 2004

The pigment composition and concentration of phytoplankton assemblages using HPLC in the adjacent waters of four nuclear power plants (Yonggwang, Kori, Wolsong and Ulchin) were investigated during the spring blooming in 2004. The mean concentration of chlorophyll a ranged from 563.8 to 2,949.0ng $l^{-1}$, with the lowest concentration at Kori and the highest concentration at Wolsong. Among the carotenoids, the amounts of fucoxanthin and chlorophyll $C_2$ were relatively higher than those of other pigments in the study site. As minor pigments, zeaxanthin, chlorophyll b, 19'-butanoyloxyfucoxanthin, diadinoxanthin, 19'-hexanoyloxyfucoxanthin, chlorophyll $C_3$ and peridinin were detected. The results of pigment composition and concentration showed that diatoms had an important proportion of phytoplankton community when a spring bloom occurred. Cyanobacteria was present relatively low density at the Wolsong and the green alga such as chlorophytes and prasinophytes were abundant at the Yonggwang and Kori, while dinoflagellates characterized by peridinin were common at Ulchin and Kori. The pigment composition and concentration of phytoplankton after passing through the cooling-water system of nuclear power plant were highly variable. No distinct trend of the change of each pigment composition and amount was detected but the variation of fucoxanthin and chlorophyll $C_2$ highly coupled with that of chlorophyll a. We pointed out that the diatom controlled the overall variation of phytoplankton biomass during the spring season.

• Macromolecular Research
• /
• v.12 no.1
• /
• pp.53-62
• /
• 2004

We have prepared polymer composites of low-density polyethylene (LDPE) and ionomers (Surlyn 8940) containing polar segments and metal ions by melt blending with carbon black (CB) as a conductive filler. The resistivity and positive temperature coefficient (PTC) of the ionomer/LDPE/CB composites were investigated with respect to the CB content. The ionomer content has an effect on the resistivity and percolation threshold of the polymer composites; the percolation curve exhibits a plateau at low CB content. The PTC intensity of the crosslinked ionomer/LDPE/CB composite decreased slightly at low ionomer content, and increased significantly above a critical concentration of the ionomer. Irradiation-induced crosslinking could increase the PTC intensity and decrease the NTC effect of the polymer composites. The minimum switching current (Ι$\sub$trip/) of the polymer composites decreased with temperature; the ratio of Ι$\sub$trip/ for the ionomer/LDPE/CB composite decreased to a greater extent than that of the LDPE/CB composite. The average temperature coefficient of resistance (${\alpha}$$\sub$T/) for the polymer composites increased in the low-temperature region.

• Journal of Aquaculture
• /
• v.13 no.4
• /
• pp.339-351
• /
• 2000

Optimal environmental conditions, that sustained fastest growth, lowest mortality and abnormality of the scallop Patinopecten yessoensis, were identified from field experiments undertaken at Chumunjin during 1991-1998. Temperature within the water column 10~30 m depth ranged between 5 and 23$^{\circ}C$; high temperature and daily fluctuation resulted in growth retardation and heavy mortality of the scallop. Optimal salinity range was between 31.5 and 34.5%0 and water transparency 6.0 and 18.1 m, which was significantly affected by phytoplankton density. Chlorophyll concentration ranged between 0.04 and 3.51 f.lgfL. Low temperature and high chlorophyll concentration appear to support faster growth of the scallop. Optimal periods of transplantation for intermediate culture were between mid July and early November: cultured under high density during July-August as a first step and under low density during mid September through early November as a second step. Optimal stocking density in square net cage (<35${\times}$35 em) for intermediate culture was 30-40 individuals per cage for main culture using lantern net and 80 -100 individuals of the size of 1.5 ~ 3.0 em shell height per cage for sowing culture. During the intermediate culture, the highest growth was realized, when the cage was held at water depth between 10 and 15 m. Water depth below 25 m, however, was best to avoid mass mortality during the periods of abnormally high water temperature and high variation of water temperature. The daily growth rate during the intermediate culture was between 0.019~0.381 mm; low in January and February but high in March and April. It is suggested that the main culture is commenced before June under low stocking density to avoid the possibility of mass mortality during summer by high water temperature.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.9
• /
• pp.476-481
• /
• 2016

Pressure retarded osmosis (PRO) is a quite new technique for power generation using an osmotically driven membrane process. In the PRO process, water permeates through a semipermeable membrane from a low concentration feed solution to a high concentration draw solution due to osmotic pressure. This study carried out to evaluate the performance of the 8 in spiral wound membrane module using reverse osmosis concentrate for a draw solution and reverse osmosis permeate for a feed solution. Three different flowrates of draw and feed solution, such as 2.4 L/min, 5.0 L/min, and 10.0 L/min were used to estimate the power density and water flux under various range of hydraulic pressure differences between 5 bar and 30 bar. In addition, the effects of feed and draw solution concentration, flowrate, and mixing ratio on 8 in spiral wound PRO membrane module performance were investigated in this study. As major results, increases of the draw solution concentration lead to the improvement of power denstiy, and water flux. Also, increase of flowrate resulted in the improvement of power density and water flux. In addition, optimal mixing ratio of draw and feed solution inlet flowrate was found to be 1:1 to attain a maximum power denstiy.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.1
• /
• pp.33-40
• /
• 2003

Fusobacterium nucleatum, one of the bacteria causing halitosis, produces the volatile sulfur compounds (VSC) such as $H_2S$ in the media containing sulfur components, and forms FeS by binding with iron component. The various factors of oral cavity affect the concentration of sulfur compounds produced by Fusobacterium nucleatum. In this study, the effect of nutrients and pH on the production of sulfur compounds by Fusobacterium nucleatum was studied with the following results. 1. The optical density of broth was increased to $0.817{\pm}0.032$ and $1.297{\pm}0.024$ by adding 1.0% sodium thiosulfate and 0.05% L-cysteine hydrochloride in the media, respectively. 2. Though the optical density of broth was $0.799{\pm}0.032$ by adding volatile sulfur compounds (VSC) only in the media, it was increased to $1.775{\pm}0.003$ and $1.648{\pm}0.022$ by adding xylitol combined with glucose and fructose, respectively. 3. The concentration of VSC was above 20,000 ppb in the media above pH 5.5. The optical density of broth was still high in the media with L-cysteine hydrochloride of higher concentration, being low in the media of lower pH. 4. The concentration of VSC was high when there was distilled water or saline solution on the media, and their amount was small. These results suggest that the production of sulfur compounds by Fusobacterium nucleatum was inhibited by xylitol and acid.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.77-77
• /
• 2011

These days, a growing demand for memory device is filled up with the flash memory and the dynamic random access memory (DRAM). Although DRAM is a reasonable solution for current demand, the universal novel memory with high density, high speed and nonvolatility, needs to be developed. Among various new memories, the magnetic random access memory (MRAM) device is considered as one of good candidate memories because of excellent features including high density, high speed, low operating power and nonvolatility. The etching of MTJ stack which is composed of magnetic materials and insulator such as MgO is one of the vital process for MRAM. Recently, MgO has attracted great interest in the MTJ stack as tunneling barrier layer for its high tunneling magnetoresistance values. For the successful realization of high density MRAM, the etching process of MgO thin films should be investigated. Until now, there were some works devoted to the investigations on etch characteristics of MgO thin films. Initially, ion milling was applied to the etching of MgO thin films. However, ion milling has many disadvantages such as sidewall redeposition and etching damage. High density plasma etching containing the magnetically enhanced reactive ion etching and high density reactive ion etching have been employed for the improvement of etching process. In this work, inductively coupled plasma reactive ion etching (ICPRIE) system was adopted for the improvement of etching process using MgO thin films and etching gas mixes of $CH_4$/Ar and $CH_4$/$O_2$/Ar have been employed. The etch rates are measured by a surface profilometer and etch profiles are observed using field emission scanning emission microscopy (FESEM). The effects of gas concentration and etch parameters such as coil rf power, dc-bias voltage to substrate, and gas pressure on etch characteristics will be systematically explored.

• Korean Journal of Organic Agriculture
• /
• v.21 no.3
• /
• pp.363-372
• /
• 2013

This experiment was carried out for development of environment-friendly agriculture materials to control Bemisia tabaci (Gennadius) in eggplant. Plant growth investigated the spray at intervals of 7 days after transplanting on 8 environment-friendly agriculture materials, such as egg-yolk and cooking oil, Results were to be good in the control and neem products. B. tabaci population density adult and nymph was low at the dinotefuran WG chemical treatment, and also low neem products of environment-friendly agriculture material. We have investigated the effect of different concentration of neem products on B. tabaci population density. Yield was high in the dinotefuran WG, and hight in the neem products and papper seed oil, but low in the sophora extracts and Ginko net sarcocarp. In the case of neem products treatment indicated 52 percent yield more than control.

• Journal of Forest and Environmental Science
• /
• v.39 no.3
• /
• pp.180-194
• /
• 2023

This study characterize, classify and evaluates the function of topography on spatial variability of some selected soil properties to assist in designing land management that support uniform agricultural production. The study site, an agricultural land, was part of the derived savanna zone in southwest Nigeria. Four soil profile pits each were established along two delineated toposequence and described following the FAO/UNESCO guidelines. Samples were collected from the identified genetic horizons. Properties of four soil series developed on different positions of the two delineated Toposequence viz upper, middle, lower slopes and valley bottom positions respectively were studied. The soil samples were analysed for selected physical and chemical properties and data generated were subjected to descriptive and inferential statistics. The results showed that soil colour, depth and texture varied in response to changes in slope position and drainage condition. The sand content ranged from 61 to 90% while the bulk density ranged between 1.06 g cm^-3 to 1.68 g cm^-3. The soils were neutral to very strongly acid with low total exchangeable bases. Available phosphorus value were low while the extractable micronutrient concentration varied from low to medium. Soils of Asejire and Iwo series mapped in the study area were classified as Typic isohyperthermic paleustult, Apomu series as Plinthic isohyperthermic paleustult and Jago series as Aquic psamment (USDA Soil Taxonomy). These soils were correlated as Lixisol, Plinthic Lixisol and Fluvisol (World Reference Based), respectively. Major agronomic constraints of the soils associations mapped in the study area were nutrient availability, nutrient retention, slope, drainage, texture, high bulk density and shallow depth. The study concluded that the soils were not homogenous, shows moderate spatial variation across the slope, had varying potentials for sustainable agricultural practices, and thus, the agronomic constraints should be carefully addressed and managed for precision agriculture.

• BMB Reports
• /
• v.30 no.2
• /
• pp.119-124
• /
• 1997

Transforming growth $factor-{\beta}\;(TGF-{\beta})$ is a multifunctional polypeptide that exerts biological roles including cell proliferation, differentiation, extracellular matrix deposition and apoptosis in many different cell types. $TGF-{\beta}$, although known as a negative growth regulator, has not been tested in human embryo lung (HEll cells. This study attempts to understand the role of $TGF-{\beta}$ on growth control of HEL cells in relationship to tyrosine phosphorylation pattern of cellular proteins. In density-arrested HEL cells treated with $TGF-{\beta}$, analysis of Western immunoblot showed induction of tyrosine phosphorylation of two major cellular proteins (15 kDa and 45 kDa). In normal proliferating HEL cells with different concentrations of serum, further analysis indicated that the increase in tyrosine phosphorylation of a 45 kDa protein was regulated in serum concentration-dependent manner. However, in proliferating HEL cells treated with $TGF-{\beta}$, tyrosine phosphorylation of 45 kDa was down-regulated. Calcium involvement in the regulation of tyrosine phosphorylation of 45 kDa and 15 kDa proteins was also examined. Tyrosine phosphorylation of 15 kDa protein but not of 45 kDa protein was regulated by exogenous calcium. The level of tyrosine phosphorylation of 15 kDa protein was low at reduced caclium concentration and high at elevated caclium concentration. $TGF-{\beta}$ reversed the pattern of tyrosine phosphorylation of 15 kDa protein. These results suggest that tyrosine phosphorylation of 45 and 15 kDa proteins in HEL cells may be controlled depending on the physiological status of the cells, i.e., low in arrested cells and high in proliferating cells. And the tyrosine phosphorylation of the two proteins appears to be down- or up-regulated by $TGF-{\beta}$.