• Polymer(Korea)
• /
• v.27 no.2
• /
• pp.98-105
• /
• 2003

The surface energy and the effect of functional groups on the surface of the ozone-treated low-density polyethylene (LDPE) film were studied. Treatment conditions were treatment time, total amount of transferred ozone, and ozone concentration. The introduction of polar groups on the surface of LDPE film after ozone treatment was confirmed by FTIR-ATR and XPS analyses. Surface fee energy of the LDPE film was examined by a contact angle method. The ozone treated-LDPE film showed a decreased water contact angles about 15$^{\circ}$ mainly due to the increased concentration of oxygen-containing functional groups, which was attributed to the increased surface free energy or $O_{IS}/C_{IS}$Also, the concentrations of the oxygen-containing functional groups on the surface of LDPE film increased with ozone treatment time and concentration, whereas no significant effects were found for the total amount of transferred ozone. From the dyeability test using Kubelka-Munk equation, it was found that the ozone treatment plays an important role in the growth of oxygen-containing functional groups of LDPE film, resulting in the improvement of dyeability for basic dyeing agent.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.4
• /
• pp.284-288
• /
• 2004

The response of dissolved oxygen (DO) concentrations caused significant change in root number, root length, coleoptile length, shoot length and leaf age of seedlings. The genotypic difference in the effect of DO also highly significant (P<0.01) for all of the seedling traits. The number and length of root were extremely inhibited at the condition of $0.39\pm0.09$ DO concentration. While the coleoptile elongated markedly in the lowest DO concentrations, the shoot did not develop. The root growth was improved slightly at the $1.39\pm0.27mg L^{-1}$, however, there were no difference among genotypes at these two low DO concentrations. As the DO concentration become higher, the growth of root and shoot was improved remarkably. Root number, root length and shoot length was significantly different between $20\;and\;30^{\circ}C$ in DO rich and normal conditions, the development of those traits were apparently accelerated in high water temperature, however those traits of seedlings in DO deficiency were not different between the two temperatures except for shoot length. On the other hand the coleoptile length was not affected by the stagnant water temperature; it was stimulated by the low DO concentration. The competition of DO was greater as the seedling density was increased in the stagnant water, therefore the seedlings grown under high density have long and white coleoptiles, and the growth of roots and shoots was retarded severely.

• Journal of Environmental Science International
• /
• v.16 no.2
• /
• pp.197-202
• /
• 2007

Formaldehyde is a typical indoor air pollutant that has numerous adverse health problems in modern living conditions. Phytoremediation that use plants to remove contaminants from polluted media can be applied to improve indoor air quality. Two sets of experiments; 1) two rooms in newly built auditorium and 2) a bed room in 2-year-old apartment; were performed to investigate plant effects on indoor formaldehyde concentration. It was observed from the experiments that plant can help decontaminating formaldehyde at low concentration level (0.1 ppm) but the effects decreased considerably at hish concentration (1ppm). The purification effects of indoor plant also showed the periodic pattern due to its physiological activity. More purification was observed as increasing plant density in the bed room but the formaldehyde concentration returned the original concentration level in two days after removing plants. It was suggested from the results that air purification using plants is an effective means of reduction on indoor formaldehyde level, though, reduction of source is highly desirable when the concentration level is high. The results also suggest that introducing supplementary purifying aids and/or efficient ventilation could be considered due to periodic removal pattern of plant.

• Journal of Pharmaceutical Investigation
• /
• v.40 no.1
• /
• pp.23-31
• /
• 2010

In our previous work on levodopa delivery at pH 2.5 using iontophoresis, we found that cathodal delivery showed higher permeation than anodal delivery and electroosmosis plays more dominant role than electrorepulsion. In this work, we studied the transdermal transport of levodopa at very low pH (pH=1.0) where all levodopa molecules are cations, and evaluated some factors which affect the transdermal transport. The transport study at pH 2.5 was also conducted for comparison. The contribution of electrorepulsion and electroosmosis on flux was also evaluated. Using stable aqueous solution, the effect of electrode polarity, current density, current type and drug concentration on transport through skin were studied and the results were compared. We also investigated the iontophoretic flux from hydroxypropyl cellulose (HPC) hydrogel containing levodopa. In vitro flux study was performed at $33^{\circ}C$, using side-by-side diffusion cell. Full thickness hairless mouse skin were used. Current densities applied were 0.2, 0.4 or $0.6\;mA/cm^2$. Contrary to the pH 2.5 result, anodal delivery showed higher flux, indicating that electrorepulsion is the dominant force for the transport, overcoming the electroosmotic flow which is acting against the direction of electrorepulsion. Cumulative amount of levodopa transported was increased as the current density or drug concentration was increased. When amount of current dose was constant, continuous current was more beneficial than pulsed current in promoting levodopa permeation. Similar transport results were obtained when hydrogel was used as the donor phase. These results indicate that iontophoretic delivery of zwitterion such as levodopa is much complicated than that can be expected from small ionic molecules. The results also indicate that, only at very low pH like pH 1.0, electrorepulsion can be the dominant force over the electroosmosis in the levodopa transport.

• Journal of Microbiology and Biotechnology
• /
• v.31 no.2
• /
• pp.181-188
• /
• 2021

Bacillus subtilis and Enterococcus faecium are commonly used probiotics. This study aimed to identify the effect of live combined Bacillus subtilis R0179 and Enterococcus faecium R0026 (LCBE) on obesity-associated hyperlipidemia and gut microbiota in C57BL/6 mice. Forty male C57BL/6 mice were divided into four groups: normal group (N group), model group (M group), low-dose group (L group), and high-dose group (H group). Mice were gavaged with LCBE at 0.023 g/mice/day (L group) or 0.23 g/mice/day (H group) and fed with a high-fat diet for 8 weeks. In vitro E. faecium R0026 showed an ability to lower the low-concentration of cholesterol by 46%, and the ability to lower the high-concentration of cholesterol by 58%. LCBE significantly reduced the body weight gain, Lee index, brown fat index and body mass index of mice on a high-fat diet. Moreover, LCBE markedly improved serum lipids (including serum triglyceride, total cholesterol, low-density lipoprotein and high-density lipoprotein) while also significantly reducing liver total cholesterol. Serum lipopolysaccharide and total bile acid in L and H groups decreased significantly compared with M group. PCR-DGGE analysis showed that the composition of gut microbiota in the treatment groups was improved. Akkermansia muciniphila was found in H group. The PCA result indicated a similar gut microbiota structure between LCBE treatment groups and normal group while the number of bands and Shannon diversity index increased significantly in the LCBE treatment groups. Finally, qPCR showed Bifidobacterium spp. increased significantly in H group compared with M group, LCBE alleviated liver steatosis and improved brown adipose tissue index.

• Applied Chemistry for Engineering
• /
• v.9 no.2
• /
• pp.261-267
• /
• 1998

We have investigated the stability of macroemulsions of AOT prepared from Winsor systems. The emulsion system was prepared from heptane+aqueous NaCl+AOT. As the concentration of NaCl increases, the stability of the emulsion increases, reaches a maximum, and then decreases. At low salt concentration the creaming occurred due to density difference of oil and aqueous phases. We developed a model for the creaming. Behavior of the emulsions containing low salt could be described very well by the model, however, at high salt concentration the electrostatic repulsion decreased due to screening and droplets started to attract each other and the stability of the emulsion decreased.

• Korean Journal of Ecology and Environment
• /
• v.38 no.spc
• /
• pp.8-11
• /
• 2005

Carbon stable isotope ratios of producers varied in lake ecosystems. In tile present study, we tried to estimate the seasonal variations of carbon isotope ratios of phytoplankton and benthic diatoms in a strongly acidic lake ecosystem. Lake Katanuma is a volcanic, strongly acidic lake (average pH of 2.2), located in Miyagi, Japan. Only two algal species dominate in Lake Katanuma; Pinnularia acidojaponica as a benthic diatom, and Chlamydomonas acidophila as a green alga. Carbon isotope values of P. acidojaponica varied seasonally, while those of particulate organic matter, which were mainly composed of C. acidophila remained fairly stable. The differences suggested that $CO_2$ gas was more frequently limited for P. acidojaponica than C. acidophila, since high density patches of benthic diatoms were sometimes observed on the lake sediment. Generally, carbon concentration mechanisms (CCMs)of microalgae can fix bicarbonate in lakes, and affect the carbon isotope values of microalgae. While, in Lake Katanuma, CCMs of the microalgae may scarcely function because of high $CO_2$ gas concentration and low pH. This is the reason for low seasonal amplitude of carbon isotope values of phytoplankton relative to those in other lakes.

• KSBB Journal
• /
• v.13 no.4
• /
• pp.438-443
• /
• 1998

Effects of various environmental factors on cell size index(FCW/DCW) in Thalictrum rugosum. Lithospermum erythrorhizon and Taxus cuspidata plant cell suspension cultures were investigated. Time course change of cell size index were also observed. In batch cultures, FCW/DCW increased according to the decrease of sugar concentration. For short-term experiment within 24 hr, FCW/DCW value could be reduced significantly by increasing sugar concentration. When an osmoticum such as mannitol was added, FCW/DCW converged to a low value. Therefore, it was confirmed that osmolality of the medium was important in determining cell size or water content of the cells. Inorganic salts or treatment with organic solvent also exhibited some effect on the cell size index. However, pH and centrifugal force did not show any influences. On the other hand, it was found that the addition of Pluronic F-68 reduced FCW/DCW. By combining these results effectively, it may be possible to increase the cell concentration in high density culture to a higher extent.

• Journal of the Korean Institute of Gas
• /
• v.5 no.4 s.16
• /
• pp.33-39
• /
• 2001

This paper was studied on corrosion behavior of absorption refrigeration systems using $LiBr-H_2O$ working fluids. In the various concentration of lithium bromide solution, polarization test of SS 400, Cu(C1220T-OL) and Al-Ni bronze is carried out. And the corrosion behavior of materials forming absorption refrigeration systems is investigated. The main results are as following: 1) As concentration of lithium bromide solution increases, polarization resistance of materials of each kinds is low. And open circuit potential becomes less noble, the corrosion current density is high drained 2) Open circuit potential of SS 400 is less noble than that of Cu and Al-Ni bronze, corrosion current density of SS5 400 is high drained than that of Cu and Al-Ni bronze. 3) Anodic polarization of Cu and Al-Ni bronze in $62\%$ LiBr solution continues the active state. that of Cu and Al-Ni bronze in the natural sea water maintains the active state and the critical current for passivation appears.

• The Plant Pathology Journal
• /
• v.27 no.4
• /
• pp.333-341
• /
• 2011

Two antifungal bacteria were selected from forest soils during the screening of microorganisms antagonistic to Cylindrocarpon destructans, a cause of ginseng root rot. The antifungal bacteria were identified as Bacillus subtilis (I4) and B. amyloliquefaciens (yD16) based on physiological and cultural characteristics, the Biolog program, and 16S rRNA gene sequencing analyses. Antagonistic activity of both bacterial isolates to C. destructans increased with increasing temperature. More rapid starch hydrolytic activity of the bacteria was seen on starch agar at higher temperatures than at lower temperatures, and in the higher density inoculum treatment than in the lower density inoculum treatment. The bacterial isolates failed to colonize ginseng root the root tissues inoculated with the bacteria alone at an inoculum density of $1{\times}10^6$ cfu/ml, but succeeded in colonizing the root tissues co-inoculated with the bacteria and C. destructans. Scanning electron microscopy showed that the pathogen was damaged by the low-density inoculum treatment with the bacterial isolates as much as by the high-density inoculum treatment. Both bacterial isolates were more effective in reducing root rot when they were treated at a concentration of $1{\times}10^6$ cfu/ml than at $1{\times}10^8$ cfu/ml. Also, only the former treatment induced prominent wound periderm formation, related to structural defense against pathogen infection. The results suggest that the bacterial antagonists may have high potential as biocontrol agents against ginseng root rot at relatively low-inoculum concentrations.