• Journal of the Korean Ceramic Society
• /
• v.56 no.6
• /
• pp.577-582
• /
• 2019

Recently, E-glass fiber is the one of most widely used ceramic fiber for aerospace fields. Recycling technology for waste of wind power blades is arising issue for reasons of low manageability and high cost of wastes. Though glass fiber is perfectly dissolved in hydrofluoric acid, low cost for recycling and harmless to human is important for recycling of blades. Chemically melted glass fiber will be used as different purpose like accelerator of hardening for shotcrete. In this study, dissolution process of glass fiber is tested in NaOH solution at low temperatures. In addition, difference in diameter reduction of glass fiber is observed by various alkali concentration and reaction times, treatment temperatures using FE-SEM.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.121-121
• /
• 2018

Copper is a promising electronic material due to low cost and high electrical conductivity. However, the oxidation problem in an ambient condition makes a crucial issue in practical applications. In here, we developed a simple and cost-effective Cu patterning method on a flexible PET film by combining a solution processable Cu nanoparticle patterning and a low temperature post-processing using acetic acid treatment, laser sintering process and acid-assisted laser sintering process. Acid-assisted laser sintering processed Cu electrode showed superior characteristics in electrical, mechanical and chemical stability over other post-processing methods. Finally, the Cu electrode was applied to the flexible electronics applications such as flexible and transparent heaters and touch screen panels.

• ETRI Journal
• /
• v.37 no.4
• /
• pp.787-792
• /
• 2015

To accomplish a high-speed test on low-speed automatic test equipment (ATE), a new instruction-based fully programmable memory built-in self-test (BIST) is proposed. The proposed memory BIST generates a highspeed internal clock signal by multiplying an external low-speed clock signal from an ATE by a clock multiplier embedded in a DRAM. For maximum programmability and small area overhead, the proposed memory BIST stores the unique sets of instructions and corresponding test sequences that are implicit within the test algorithms that it receives from an external ATE. The proposed memory BIST is managed by an external ATE on-the-fly to perform complicated and hard-to-implement functions, such as loop operations and refresh-interrupts. Therefore, the proposed memory BIST has a simple hardware structure compared to conventional memory BIST schemes. The proposed memory BIST is a practical test solution for reducing the overall test cost for the mass production of commodity DDRx SDRAMs.

• International Journal of Computer Science & Network Security
• /
• v.22 no.1
• /
• pp.255-261
• /
• 2022

Routing Protocol for Low-Power and Lossy Networks (RPLs) in Internet of Things (IoT) is currently one of the most popular wireless technologies for sensor communication. RPLs are typically designed for specialized applications, such as monitoring or tracking, in either indoor or outdoor conditions, where battery capacity is a major concern. Several routing techniques have been proposed in recent years to address this issue. Nevertheless, the expansion of the network lifetime in consideration of the sensors' capacities remains an outstanding question. In this research, aANN-CUCKOO based optimization technique is applied to obtain a more efficient and dependable energy efficient solution in IOT-RPL. The proposed method uses time constraints to minimise the distance between source and sink with the objective of a low-cost path. By considering the mobility of the nodes, the technique outperformed with an efficiency of 98% compared with other methods. MATLAB software is used to simulate the proposed model.

• Applied Biological Chemistry
• /
• v.41 no.8
• /
• pp.583-586
• /
• 1998

Porous ceramic cups are used for monitoring ion concentration in soil solutions in various time course and depth. A soil solution sampler was constructed in laboratory by inserting pliable perfluoroalkoxy(PFA) tubings into porous cup through holes in PVC rod segment which plugged top opening of the porous cup. The system was installed in drip irrigated soil in a vertical position, and nitrogen movement below the drip basin was monitored. To collect soil solution, vacuum in the cup was applied with a hand vacuum pump. The samples obtained were sufficient enough to run quantitative analyses for a number of chemicals. Nitrogen transformation and movement could be well defined, and the system seemed to be relevant to the other soil solution samplers in monitoring chemical movement in soil. Although this system has general deficiencies found in the other samplers using ceramic cup, it could be easily constructed at a low cost. Since the tubing was pliable, the cups could be installed in horizontal position, and this allows installations of the cups at more precise depth increments and also more precise samplings of soil solution at each depth.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.10a
• /
• pp.27-29
• /
• 2003

Solution-based MOD-TFA deposition technology of YBCO layers offers a route to low-cost YBCO coated conductors. Since the structures and properties of grown thin film by MOD process are strongly influenced by chemistry of precursor solution, the chemical modification of precursor solution for MOD process are important for improvement of the electrical properties of YBCO films. In this study, the precursor solution for MOD process are modified by chemical additives and solvents. The microstructure and texture of YBCO films grown by chemically modified precursor solution were characterized with SEM/EDS, XRD.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.43 no.1
• /
• pp.70-78
• /
• 2020

Under the situation which customer orders are cancelled unless all products in the order are delivered all at once, this paper concentrates on the purchase dependent demands and explores the systematic approach to implant the purchase dependence into the multi-product inventory model. First, by acknowledging that it is a challenging task to formulate a suitable inventory model for the purchase dependence, we derive the optimal solution condition using an EOQ model and extend the optimal solution condition to periodic review models. Then, through the comparison simulation of four inventory policies regarding several degrees of purchase dependence, we demonstrate that the inventory models which consider the purchase dependence generate less total cost than the inventory models which ignore the purchase dependence. In general, the inventory models which consider the purchase dependence reduce the loss of sales by maintaining more inventories, which results in reducing the total cost. Consequently, the simulation result supports the effectiveness of this paper's approach. In addition, this paper uses the individual order period and joint order period obtained from the EOQ model for the multi-product inventory model. Through the in-depth analysis of comparing the two models, we observe that the model of using the joint order period produces less total cost when the degree of purchase dependence is high, but the model of using the individual order period produces less total cost when the degree of purchase dependence is low.

• Proceedings of the Optical Society of Korea Conference
• /
• 2006.07a
• /
• pp.525-526
• /
• 2006

Ethernet Passive Optical Networks (EPON) are an emerging access network technology that provide a low-cost method of deploying optical access lines between a central office (CO) and a customer site. This paper shows that subscriber unit manages traffic data between a central office (CO) and a customer site in economic solution.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.187-187
• /
• 2012

Solution-processed metal-alloy oxides such as indium zinc oxide (IZO), indium gallium zinc oxide (IGZO) has been extensively researched due to their high electron mobility, environmental stability, optical transparency, and solution-processibility. In spite of their excellent material properties, however, there remains a challenging problem for utilizing IZO or IGZO in electronic devices: the supply shortage of indium (In). The cost of indium is high, what is more, indium is becoming more expensive and scarce and thus strategically important. Therefore, developing an alternative route to improve carrier mobility of solution-processable ZnO is critical and essential. Here, we introduce a simple route to achieve high-performance and low-temperature solution-processed ZnO thin film transistors (TFTs) by employing alkali-metal doping such as Li, Na, K or Rb. Li-doped ZnO TFTs exhibited excellent device performance with a field-effect mobility of $7.3cm^2{\cdot}V-1{\cdot}s-1$ and an on/off current ratio of more than 107. Also, in case of higher drain voltage operation (VD=60V), the field effect mobility increased up to $11.45cm^2{\cdot}V-1{\cdot}s-1$. These all alkali metal doped ZnO TFTs were fabricated at maximum process temperature as low as $300^{\circ}C$. Moreover, low-voltage operating ZnO TFTs was fabricated with the ion gel gate dielectrics. The ultra high capacitance of the ion gel gate dielectrics allowed high on-current operation at low voltage. These devices also showed excellent operational stability.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.302.1-302.1
• /
• 2016

Solution-processed amorphous metal-oxide thin-film transistors (TFTs) are considered as promising candidates for the upcoming transparent and flexible electronics due to their transparent property, good performance uniformity and possibility to fabricate at a low-temperature. In addition, solution processing metal oxide TFTs may allow non-vacuum fabrication of flexible electronic which can be more utilizable for easy and low-cost fabrication. Recently, for high-mobility oxide TFTs, multi-layered oxide channel devices have been introduced such as superlattice channel structure and heterojunction structure. However, only a few studies have been mentioned on the bias illumination stress in the multi- layered oxide TFTs. Therefore, in this research, we investigated the effects of bias illumination stress in solution-processed bilayer oxide TFTs which are fabricated by the deep ultraviolet photochemical activation process. For studying the electrical and stability characteristics, we implemented positive bias stress (PBS) and negative bias illumination stress (NBIS). Also, we studied the electrical properties such as field-effect mobility, threshold voltage ($V_T$) and subthreshold slop (SS) to understand effects of the bilayer channel structure.