• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.7
• /
• pp.4855-4862
• /
• 2015

This paper proposes low price power component measurement and record system for preventing electrical safety accident and supporting accident cause analysis by periodically monitoring and recording the operation status of electrical equipments. The proposed system was designed by mainly using parts to measure accurate power component but reduce cost. Especially, low cost and high effectiveness system implementation was possible by using MAXIM 78M6631 to calculate power components in the definition of IEEE Standard 1459-2010 related power quality. The measurement performance of the developed system is tested by using standard devices such as YOKOGAWA power analyzer WT1600. The test results showed that accuracy of the developed system is less than 0.5 % and the developed system is tested in a real area to verify the operation reliability and remote monitoring performance of the system over 6 months.

• International Journal of Advanced Culture Technology
• /
• v.10 no.4
• /
• pp.555-560
• /
• 2022

In this study, the insertion loss and phase delay according to the multi-layer structure radome parameters were analyzed using the boundary value solution approach, and the multi-layer structure and hexa mesh structures with low-loss electrical characteristics for the Ku-band transmission/reception frequency of 10.7 ~ 14.5 GHz were designed and manufactured. A hexa mesh was applied to minimize radio wave transmission and scattering, which lowered the transmittance refractive index according to the radio incident angle and minimized dielectric loss through high-density foam. Similar to the simulation result, the transmission loss obtained the gain in a specific receiving frequency band, and in the transmission frequency band, an excellent low loss characteristic was obtained with an insertion loss of 0.8dB or less. The results of this study can be used in radio transmission radomes of low-weight, low-cost end-system protection devices.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.4
• /
• pp.315-321
• /
• 2011

The CRT monitor display system for SONAR signal that are commonly used in ships or naval vessels uses vector scanning method. Therefore the processing circuits of the system is complex. Also because production had been shut down, the supply of parts is difficult as well as high-cost. FPGA -based embedded processor system is flexible to adapting to various applications because it makes simple processing circuits and its core is easily reconfigurable, and provides high speed performance in low-cost. In this paper, we describe an implementation of SONAR signal LCD display system using the FPGA embedded processor system to overcome some weakness of existing CRT system. By changing X-Y Deflection and CRT control blocks of current system into FPGA embedded processor system, our system provides the simplicity, flexibility and low-cost of system configuration, and also real-time acquisition and display of SONAR signal.

• ETRI Journal
• /
• v.26 no.4
• /
• pp.367-370
• /
• 2004

A new transmission system is necessary for the Digital Multimedia Broadcasting (DMB) service in Korea. Therefore, in this paper, we propose a new architecture for the implementation of a DMB transmission system based on Eureka-147. We describe the design and implementation of the Ensemble remultiplexer, which is essential to the proposed system for remultiplexing ETI frames and MPEG-2 transport streams. The proposed system provides a solution with high flexibility and low cost for multimedia broadcasting service. The functions of this transmission system have been verified by using our DMB receiver and other related systems.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.12
• /
• pp.4648-4663
• /
• 2020

This paper proposes the Lempel-Ziv 4(LZ4) compression accelerator optimized for scale-out servers in data centers. In order to reduce CPU loads caused by compression, we propose an accelerator solution and implement the accelerator on an Field Programmable Gate Array(FPGA) as heterogeneous computing. The LZ4 compression hardware accelerator is a fully pipelined architecture and applies 16 dictionaries to enhance the parallelism for high throughput compressor. Our hardware accelerator is based on the 20-stage pipeline and dictionary architecture, highly customized to LZ4 compression algorithm and parallel hardware implementation. Proposing dictionary architecture allows achieving high throughput by comparing input sequences in multiple dictionaries simultaneously compared to a single dictionary. The experimental results provide the high throughput with intensively optimized in the FPGA. Additionally, we compare our implementation to CPU implementation results of LZ4 to provide insights on FPGA-based data centers. The proposed accelerator achieves the compression throughput of 639MB/s with fine parallelism to be deployed into scale-out servers. This approach enables the low power Intel Atom processor to realize the Hadoop storage along with the compression accelerator.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.1
• /
• pp.186-192
• /
• 2009

With the proliferation of ubiquitous computing we have witnessed the wide application of many wireless sensor networks into various areas because of easy installations and low-cost merits. The commercially available equipments for monitoring and predicting cracks in the mountain regions are still burden for us in terms of the installation complexity and the cost. Alternatively we in this paper design and implement a pilot slop-crack monitoring and prediction system which is based on low-cost commercial sensor networks. The proposed system is easy to install on cliffs, slopes, rocks, and banks and may minimize the destruction of the original geographical forms. Expected is that its installation and maintenance costs may reduce to the half of those of existing systems.

• Journal of Korea Society of Industrial Information Systems
• /
• v.22 no.6
• /
• pp.31-38
• /
• 2017

With the Development of Information Technology, Security is becoming very Important. Existing Security Systems are Mostly Expensive and Not Easy to Implement, and are Also very Complex when using Biometric Information. In this paper, We try to solve this Problem by Implementing a Low cost Internet based Security Terminal Using Fingerprint and Face Image. To Implement a Low-cost Security System, a Fingerprint Scanner and a Camera are installed in Raspberry pi, and the Scanned Image is encrypted with the AES-256 Algorithm and Transmitted to Cloud. Through This Study, We confirmed the Possibility of the Proposed System in view of Authentication, Cost Reduction, Security and Scalability.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.5
• /
• pp.67-71
• /
• 2000

The history of the paper industry has shown a strong technological evolution which has been an essential factor in achieving low cost, high quality paper products and in sustaining the strength of the industry. In the last decades paper machine development has been rapid. This has helped to establish paper as a "low cost" material. In future, the pressure from the competing media will only accelerate the technological efforts to improve cost and functional'||'&'||'not;ity of paper. In addition, in the future, technological advances will be combined with innovation in busi'||'&'||'not;ness concepts. Certain production methods are likely to be developed which will distribute current process stages outside the paper mill. Papermakers can begin to reduce their invest'||'&'||'not;ment risk by subcontracting large-scale base paper production but taking responsibility for the higher value finishing process stages. Finishing will be more closely integrated with the final use. The role of technology supplier to the paper industry will naturally evolve to reflect all these changes. Metso is already actively collaborating downstream in the different paper-related business chains. This collaboration will be crucial for implementation of new business and technology innovations in P'||'&'||'P industry and Metso will certainly benefit from its catalyst role in this transition.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.21 no.1
• /
• pp.39-44
• /
• 2013

The amount of greenhouse gas (GHG) emissions has been increasing steadily over the last 4 years, averaging 6.8 percent a year, due to the growth of low cost carriers and the increased demand for air transportations. For the aviation GHG reduction, various fuel saving activities are implemented in many areas such as high-efficiency aircraft and bio-fuel development in the technical part and low carbon flight procedures, short cut route development in the operational approach. Among the various reduction technologies, we focused on low carbon flight procedures that are crucial to GHG reduciton and suggested a reduction effect according to target implementation rate using by fuel saving estimation data in each aircraft type.

• Journal of Korea Multimedia Society
• /
• v.14 no.3
• /
• pp.440-448
• /
• 2011

The needs for the OpenGL-family of the rendering library standards are highly increasing, especially for the graphical human-machine Interface on the various systems including smart phones and personal information devices. Additionally, in the case of safety-critical market for avionics, military, medical and automotive applications, OpenGL SC, the safety critical profile of the OpenGL library plays the major role for the graphical interfaces. In this paper, we represent our OpenGL SC emulation library on the OpenGL 1.x rendering pipeline which is widely available on the existing embedded systems, to provide the features of OpenGL SC standard cost-effectively. Our method can provide the OpenGL SC features at the low development cost on the embedded systems, and its implementation is also one of the fundamental elements for the emulation of embedded systems in the PC environment. Our final result now works on both of Linux-based and VxWORKS systems, showing correct execution results at the reasonable speed.