• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.2
• /
• pp.801-807
• /
• 2012

In this paper, design and implementation of frequency down converter based on LC filter technic. Single frequency down converter, designed a low-noise amplifier, mixer, IF amplifier, LC filter was configured. And it is composed of DC block capacitors and RF bypass capacitor. LC filter, replace it with the IC reduced the power and realized low cost. The gain of single down converter is about 10dBm and realized by 18MHz bandwidth at 70MHz band.

• Journal of Digital Contents Society
• /
• v.13 no.4
• /
• pp.525-530
• /
• 2012

Wireless sensor networks consist of resource constraint devices which typically send data measured by sensors attached to the end devices towards a coordinator. One of the best solution for wireless sensor networks is ZigBee, where it is wireless standard introduced for low power, low cost wireless communication with moderate data rates. In this paper, we present porting of Z-Stack and implementation of UART on the TI CC2530. We show that our implemented board works correctly in terms of transmitting and receiving data via serial port.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.9 no.4
• /
• pp.240-248
• /
• 2009

Moore's law has driven silicon technology scale down aggressively, and it results in significant increase of leakage current on nano-meter scale CMOS. Especially, in mobile devices, leakage current has been one of designers' main concerns, and thus many studies have introduced low power methodologies. However, there are few studies to minimize implementation cost in the mixed use of the methodologies to the best of our knowledge. In this paper, we introduce industrial applications of low power design methodologies for the decrease of leakage current. We focus on the design cost reduction of power gating and reverse body bias when used together. Also, we present voltage scale as an alternative to reverse body bias. To sustain gate leakage current, we discuss the adoption of high-$\kappa$ metal gate, which cuts gate leakage current by a factor of 10 in 32 nm CMOS technology. A 45 nm mobile SoC is shown as the case study of the mixed use of low power methodologies.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.141-144
• /
• 2000

최근에 무선통신망을 이용한 데이터 서비스가 폭넓게 제공되면서, 이동체(MS:mobile station)에 대한 위치정보나 교통상황 둥의 부가 정보 서비스가 제공되고 있다. 이와 같이 이동체가 자동차와 같은 운행수단일 때 사용자가 디스플레이 되는 문자정보를 확인하게 되면 운전의 안정성이 저하되어 실용적이지 못하다. 이를 위해서 문자를 음성으로 전환하여 주는 문자-음성변환기(text to speech : TTS)가 필요하다. 본 논문은 car navigation용 '한국어 무제한 어휘 음성합성기' 를 저가의 DSP chip(ADSP-2185)과 저용량의 4M bits ROM을 사용하여 low-cost system으로 하드웨어를 구성하였다. 본 연구에서 개발된 실시간 한국어 음성 합성기는 저가의 통신 단말기로서 사용 될 수 있으나, 반음절 연결부분의 연결이 불완전한 경우가 많았다. 그러나 종성이 없는 음절에 대해서는 명료도가 비교적 우수하였다.

• Journal of Sensor Science and Technology
• /
• v.16 no.1
• /
• pp.52-61
• /
• 2007

Networked embedded systems using the smart device and fieldbus technologies are now found in many industrial fields including process automation and automobiles. However the discrepancy between a node's view of current time and the rest of the system can cause many difficulties in the design and implementation of a networked system. To provide a networked system with a global reference time, the problem of clock synchronization has been intensively studied over the decades. However, many of the existing solutions, which are mainly developed for large scale distributed computer systems, cannot be directly applied to embedded systems. This paper presents a fault-tolerant clock synchronization technique that can be used for a low-cost embedded system using a CAN bus. The effectiveness of the proposed method is demonstrated with a set of microcontrollers and DC motor-based actuators.

• Journal of Information Technology Services
• /
• v.8 no.2
• /
• pp.137-146
• /
• 2009

Recently the POS system market expands rapidly due to the advance of global restaurant franchises into domestic market and increase of speciality restaurants. Especially, demand for low-cost models increases sharply as small and medium-sized retailers and restaurants adopt the POS system actively. According to the current trend of the POS system, in this study, we develop an embedded-type wireless POS system using Zigbee communication, which can be used efficiently in spacious stores without space and/or time limit. The POS system is designed and implemented with three objectives: first, we develop embedded-type POS system cheaper than PC-type POS system, second, we develop a competitive product with high quality and low cost and last, we focus on developing a POS system which can be used in the food service industry.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.517-520
• /
• 2003

Commercial video scope use CCD sensor and frame grabber for image capture and A/D interface but application limited by input resolution and high cost. In this paper we introduce portable video scope using CMOS sensor, USB pen and tuner card (low frame grabber) in place of commercial CCD sensor and frame grabber. Our video scope serves as an essential link between advancing commercial technology and research, providing cost effective solutions for educational, engineering and medical applications across an entire spectrum of needs. The software implementation is done using Direct Show in second version after initial trials using First version VFW (video for window), which gave very low frame rate. Our video scope operates on windows 98, ME, XP, 2000. The drawback of our video scope is crossover problem in output images caused due to interpolation, which has to be rectified for more efficient performance.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.17 no.1
• /
• pp.85-92
• /
• 2012

In this paper, a 300[W] class boost type single-phase inverter system which can compensate voltage sag on source side is designed and implemented. This system is a two-stage conversion system composed of a boost converter and a PWM inverter. If the voltage sag has appeared at the point of common coupling, the boost converter would be operated to compensate it. The boost converter and the inverter were constructed on single smart power module(SPM) to implement low cost system. The system is designed for that the THD of output voltage is below 5[%]. Finally, the validity of the design for the inverter system is verified by both simulations and experiments.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.10
• /
• pp.2373-2379
• /
• 2015

COMS(Communication, Ocean and Meteorological Satellite), the first Korean geostationary meteorological satellite, provides free meteorological information through HRIT/LRIT(High/Low Rate Information Transmission) service. This work presents the development of data receiver circuit that is essential to the implementation of a low-cost meteorological information receiver system. The data receiver circuit processes the data units according to the specification of physical layer and data link layer of HRIT/LRIT service. For this purpose, the circuit consists of a Viterbi decoder, a sync. word detector, a derandomizer, a Reed-Solomon decoder and so on. The circuit also supports PCI express interface to pass the information data on to the host PC. The circuit was implemented on an FPGA(field programmable gate array) and its function was verified through simulations and hardware implementation.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.4
• /
• pp.1129-1135
• /
• 1999

isolated word recognition using the Dynamic Time warping algorithm has shown good recognition rate on speaker dependent environment. But, practically, since the searching time of the dynamic Time Warping algorithm is rapidly increased as searching data is increased. it is hard to implement. In the context-dependent-short-query system such as educational children's workbook on the Web, the number of responses to the specific questions is limited. Therefore, the searching space for the answers can be reduced depending on the questions. In this paper, low cost implementation method using DTW for the Web has been proposed. To cover the weakness of DTW, the searching space is reduced by the context. the searching space, depends on the specific questions, is chosen from interest searchable candidates. In the real implementation, the proposed method show better performance of both time and recognition rate.