• The Journal of Korean Society for Radiation Therapy
• /
• v.20 no.1
• /
• pp.17-23
• /
• 2008

Purpose: Cone-beam CT using linear accelerator attached to on-board imager is a image guided therapy equipment. Because it is to check the patient's set-up error, correction, organ and target movement. but imaging dose should be cause of the secondary cancer when taking a image. The aim of this study is investigation of appropriate cone beam CT scan mode to compare and estimate the image quality and skin dose. Materials and Methods: Measurement by Thermoluminescence dosimeter (TLD-100, Harshaw) with using the Rando phantom are placed on each eight sites in seperately H&N, thoracic, abdominal section. each 4 methods of scan modes of are measured the for skin dose in three time. Subsequently, obtained average value. Following image quality QA protocol of equipment manufacturers using the catphan 504 phantom, image quality of each scan mode is compared and analyzed. Results: The results of the measured skin dose are described in here. The skin dose of Head & Neck are measured mode A: 8.96 cGy, mode B: 4.59 cGy, mode C: 3.46 cGy mode D: 1.76 cGy and thoracic mode A: 9.42 cGy, mode B: 4.58 cGy, mode C: 3.65 cGy, mode D: 1.85 cGy, and abdominal mode A: 9.97 cGy, mode B: 5.12 cGy, mode C: 4.03 cGy, mode D: 2.21 cGy. Approximately, dose of mode B are reduced 50%, mode C are reduced 60%, mode D are reduced 80% a point of reference dose of mode A. the results of analyzed HU reproducibility, low contrast resolution, spatial resolution (high contrast resolution), HU uniformity in evaluation item of image quality are within the tolerance value by recommended equipment manufacturer in all scan mode. Conclusion: Maintaining the image quality as well as reducing the image dose are very important in cone beam CT. In the result of this study, we are considered when to take mode A when interested in soft tissue. And we are considered to take mode D when interested in bone scan and we are considered to take mode B, C when standard scan. Increasing secondary cancer risk due to cone beam CT scan should be reduced by low mAs technique.

• Korean Journal of Radiology
• /
• v.19 no.6
• /
• pp.1119-1129
• /
• 2018

Objective: To compare the image quality of low-tube-voltage and low-iodine-concentration-contrast-medium (LVLC) computed tomography urography (CTU) with iterative reconstruction (IR) with that of conventional CTU. Materials and Methods: This prospective, multi-institutional, randomized controlled trial was performed at 16 hospitals using CT scanners from various vendors. Patients were randomly assigned to the following groups: 1) the LVLC-CTU (80 kVp and 240 mgI/mL) with IR group and 2) the conventional CTU (120 kVp and 350 mgI/mL) with filtered-back projection group. The overall diagnostic acceptability, sharpness, and noise were assessed. Additionally, the mean attenuation, signal-to-noise ratio (SNR), contrast-to-noise ratio (CNR), and figure of merit (FOM) in the urinary tract were evaluated. Results: The study included 299 patients (LVLC-CTU group: 150 patients; conventional CTU group: 149 patients). The LVLC-CTU group had a significantly lower effective radiation dose ($5.73{\pm}4.04$ vs. $8.43{\pm}4.38mSv$) compared to the conventional CTU group. LVLC-CTU showed at least standard diagnostic acceptability (score ${\geq}3$), but it was non-inferior when compared to conventional CTU. The mean attenuation value, mean SNR, CNR, and FOM in all pre-defined segments of the urinary tract were significantly higher in the LVLC-CTU group than in the conventional CTU group. Conclusion: The diagnostic acceptability and quantitative image quality of LVLC-CTU with IR are not inferior to those of conventional CTU. Additionally, LVLC-CTU with IR is beneficial because both radiation exposure and total iodine load are reduced.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1999.11b
• /
• pp.3-8
• /
• 1999

In this paper, we propose a new connected operator using morphological grayscale reconstruction for region-based coding. First, an effective method of reference-image creation is proposed, which is based on the size as well as the contrast. The conventional connected operators are good for removing small regions, but have a serious drawback for low-contrast regions that are larger than the structuring element. That is, when the conventional connected operators are applied to these regions. the simplification becomes less effective or several meaningful regions are merged to one region. To avoid this, the conventional geodesic dilation is modified to propose an adaptive operator. To reduce the effect of inappropriate propagation, pixels reconstructed to the original values are excluded in the dilation operation. Experimental results have shown that the proposed algorithm achieves better performance in terms of the reconstruction of flat zones. The picture quality has also been improved by about 7dB, compared to the conventional methods.

• Journal of radiological science and technology
• /
• v.4 no.1
• /
• pp.37-44
• /
• 1981

It is a experimental report to investigate optimum exposure technics in angiocardiography. Because of x-ray absorption and rapid voluntary motion in the heart region, it bound that discrimination ability of the exposed film is being decreased in ACG To circumvent these disadvantage it must be necessary to use short time exposure technics and also high capacity equipment in ACG. But in the case of using the low tube voltage to improve contrast on the exposed film, it will be result in a many difficulties in interpretation of the image due to increased contrast in vertebral images. Therefore the ranges 80 kVp to 90 kVp of could be suitable for the purpose of good contrast and an excellent discrimination ability and under this circumstance the optimum grid ratio for ACG was 8:1 to 12:1.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.7
• /
• pp.78-88
• /
• 1997

A three dimensional-two spatical dimensions plus time-image segmentation is widely used in a very low bit rate image sequence coding because it can solve the region correspondence problem. Mathematical morphology is a very efficient tool for the segmentation because it deals well with geometric features such as size, shape, contrast and connectivity. But if the motion in the image sequence is large in time axis, the conventional 3D morphological segmentation algorithm have difficulty in solving region correspondence problem. To alleviate this problem, we propose the hierarchical image sequence segmentation algorithm that uses the region motion information. Since the motion of a region in previous level affects that in current level uses the previous motion information to increase region correspondence. Simulation result shows improved performance for sequence frames with large motion.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.29-31
• /
• 2007

In this paper we propose an directional analytic approach in image data space for X-ray image which is detected from the X-ray projection system. Such a radiographic nondestructive testing has long been used for steel-tube inspection and weld monitoring. The welded area and thickness of steel-tube are detected from gradient radiating mechanism based on the evaluation of biased X-ray source position. The welded area is an ellipse type on low contrast X-ray image including noise. Noise originates from most of elements of the system. such as shielding CCD camera, imaging screen, X-ray source, inspected object, electronic circuits and etc.. Projection incorrectness and noise influence on imaging quality is to be represented by vertical pixels' distribution. Space analysis due to vertical direction also shows the segmental possibility between regions by visual edge evaluation.

• Journal of Biomedical Engineering Research
• /
• v.8 no.1
• /
• pp.81-86
• /
• 1987

An image feature extraction method for the low contrast fluoresceln angiogram in dlabetes was studied. To obtain effective image segmentation, an adaptive local difference image is generated and relaxation process are applied to this difference Image. By the use of distance transformed data with segmented image, shape and location of feature regions were obtained. It was shown that the location and shape descriptions of Impaired blood vessel networks and retinal regions are can he utilized for the diagnosis of diabetes and other disease.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.20 no.1
• /
• pp.37-44
• /
• 2016

Ultrasonic imaging is the most widely modality among modern imaging device for medical diagnosis. Nevertheless, medical ultrasound images suffer from speckle noise and low contrast. In this paper, we propose probabilistic edge map for ultrasound image edge enhancement using automatic alien algorithm. The proposed method used applied speckle reduced ultrasound imaging for edge improvement using sequentially acquired ultrasound imaging. To evaluate the performance of method, the similarity between the reference and edge enhanced image was measured by quantity analysis. The experimental results show that the proposed method considerably improves the image quality with region edge enhancement.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.513-516
• /
• 2007

We introduce a new copolymer alignment film made by bridge-building structure. It is a better film to decrease the image-sticking level in LCD displays. It is noted that the image-sticking was decreased by preventing ion mixing between inter-layers through high hardness. We have investigated the electrical characteristics such as pretilt angle, Residual DC, VHR by changing cure temperature and process delay time conditions of the new alignment film. In this paper, we have investigated the solution for the deep-rooted image defect and incidentally got a contrast ratio improvement by high anchoring force and hardness elevation through the new copolymer alignment film.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.2 s.25
• /
• pp.111-117
• /
• 2006

This paper describes the design principles and methods of electronic processor for thermal imager with 320$\times$240 staring array infrared detector. For the detector's nonuniformity correction and excellent image quality, we have designed the multi-point correction method using the defocusing technique of the optics. And to enhance the image of low contrast and improve the detection capability, the new technique of histogram processing has been designed. Through these image processing techniques, we have developed the high quality thermal imager and acquired a satisfactory thermal image. The result of MRTD(Minimum Resolvable Temperature Difference) is $0.1^{\circ}C$ at 4cycles/mard.