• ETRI Journal
• /
• v.32 no.4
• /
• pp.603-606
• /
• 2010

In this letter, we propose a channel estimation algorithm based on incremental pilots. These are pilots additionally inserted after puncturing the modulated orthogonal frequency division multiplexing (OFDM) symbols to enhance channel estimation performance without lowering bandwidth efficiency. A low-density parity-check code puncturing scheme is also proposed to prevent the performance degradation due to the codeword bit loss caused by punctured OFDM symbols.

• ETRI Journal
• /
• v.45 no.3
• /
• pp.404-417
• /
• 2023

This paper proposed a novel method for constructing quasi-cyclic low-density parity-check (QC-LDPC) codes of medium to high code rates that can be applied in cloud data storage systems, requiring better error correction capabilities. The novelty of this method lies in the construction of sparse base matrices, using a girth greater than 4 that can then be expanded with a lift factor to produce high code rate QC-LDPC codes. Investigations revealed that the proposed large-sized QC-LDPC codes with high code rates displayed low encoding complexities and provided a low bit error rate (BER) of 10^-10 at 3.5 dB E_b/N₀ than conventional LDPC codes, which showed a BER of 10^-7 at 3 dB E_b/N₀. Subsequently, implementation of the proposed QC-LDPC code in a softwaredefined radio, using the NI USRP 2920 hardware platform, was conducted. As a result, a BER of 10^-6 at 4.2 dB E_b/N₀ was achieved. Then, the performance of the proposed codes based on their encoding-decoding speeds and storage overhead was investigated when applied to a cloud data storage (GCP). Our results revealed that the proposed codes required much less time for encoding and decoding (of data files having a 10 MB size) and produced less storage overhead than the conventional LDPC and Reed-Solomon codes.

• ETRI Journal
• /
• v.29 no.6
• /
• pp.835-837
• /
• 2007

A multi-bit sigma-delta modulator architecture is described for low-distortion performance and a high-speed operation. The proposed architecture uses both a delayed code and a delayed differential code of analog-to-digital converter in the feedback path, thereby suppressing signal components in the integrators and relaxing the timing requirement of the analog-to-digital converter and the scrambler logic. Implemented by a 0.13 ${\mu}m$ CMOS process, the sigma-delta modulator achieves high linearity. The measured spurious-free dynamic range is 89.1 dB for -6 dBFS input signal.

• Journal of the Korean Mathematical Society
• /
• v.48 no.3
• /
• pp.475-486
• /
• 2011

The paper deals with repeated low-density burst error detecting codes with a specied weight or less. Linear codes capable of detecting such errors have been studied. Further codes capable of correcting and simultaneously detecting such errors have also been dealt with. The paper obtains lower and upper bounds on the number of parity-check digits required for such codes. An example of such a code has also been provided.

• Asia Marketing Journal
• /
• v.25 no.1
• /
• pp.26-36
• /
• 2023

This study examines the effects of disclosing sales commissions pertaining to an influencer discount code on perceived sincerity of an influencer and attitude toward using the discount code. In Study 1, consumers participated in a two-cell (commission disclosure: absent vs. present) between-subjects experimental design. In Study 2, consumers participated in a two (commission disclosure: absent vs. present) by two (discount level: low vs. high) between-subjects experimental design. The findings of Study 1 demonstrate that the sales commission disclosure pertaining to discount codes results in a higher perceived sincerity of the influencer. The results of Study 1 also reveal that the perceived sincerity of the influencer mediates the effect of the disclosure (vs. no disclosure) on attitude toward using the discount code. Further, the findings of Study 2 demonstrate the robustness of these disclosure effects regardless of whether the discount level is low or high.

• Nuclear Engineering and Technology
• /
• v.41 no.7
• /
• pp.969-978
• /
• 2009

The ASSERT-PV subchannel code developed by AECL has been applied as a design-assist tool to the advanced $CANDU^{(R)1}$ reactor fuel bundle. Based primarily on the $CANFLEX^{(R)2}$ fuel bundle, several geometry changes (such as element sizes and pitch-circle diameters of various element rings) were examined to optimize the dryout power and pressure-drop performances of the new fuel bundle. An experiment was performed to obtain dryout power measurements for verification of the ASSERT-PV code predictions. It was carried out using an electrically heated, Refrigerant-134a cooled, fuel bundle string simulator. The axial power profile of the simulator was uniform, while the radial power profile of the element rings was varied simulating profiles in bundles with various fuel compositions and burn-ups. Dryout power measurements are predicted closely using the ASSERT-PV code, particularly at low flows and low pressures, but are overpredicted at high flows and high pressures. The majority of data shows that dryout powers are underpredicted at low inlet-fluid temperatures but overpredicted at high inlet-fluid temperatures.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.107-110
• /
• 2006

This work presents a low complexity maximum-likelihood decoder for signal detection in VBLAST-STBC system, which employs non-square O-STBC code rate 3/4. By stacking received symbols from different received symbolduration and applying QR decomposition resulting the special format of upper triangular matrix R, the proposed decoder is able to provide not only ML-like BER performance but also very low computational load. The low computational load and ML-like BER performance properties of the proposed decoder are verified by computer simulations.

• KIPS Transactions on Computer and Communication Systems
• /
• v.9 no.10
• /
• pp.213-220
• /
• 2020

The power consumption and performance of hardware-based mobile and IoT embedded systems that require high specifications are one of the important issues of these systems. In particular, the problem of excessive power consumption is because it causes a problem of increasing heat generation and shortening the life of the device. In addition, in the same environment, software also needs to perform stable operation in limited power and memory, thereby increasing power consumption of the device. In order to solve these issues, we propose a Low level power improvement via identifying performance dissipation. The proposed method identifies complex modules (especially Cyclomatic complexity, Coupling & Cohesion) through code visualization, and helps to simplify low power code patterning and performance code. Therefore, through this method, it is possible to optimize the quality of the code by reducing power consumption and improving performance.

• Earthquakes and Structures
• /
• v.11 no.3
• /
• pp.483-503
• /
• 2016

This study aims to evaluate seismic performance of existing low and mid-rise reinforced concrete buildings by comparing their displacement capacities and displacement demands under selected ground motions experienced in Turkey as well as demand spectrum provided in 2007 Turkish Earthquake Code for design earthquake with 10% probability of exceedance in 50 years for soil class Z3. It should be noted that typical residential buildings are designed according to demand spectrum of 10% probability of exceedance in 50 years. Three RC building sets as 2-, 4- and 7-story, are selected to represent reference low-and mid-rise buildings located in the high seismicity region of Turkey. The selected buildings are typical beam-column RC frame buildings with no shear walls. The outcomes of detailed field and archive investigation including approximately 500 real residential RC buildings established building models to reflect existing building stock. Total of 72 3-D building models are constructed from the reference buildings to include the effects of some properties such as structural irregularities, concrete strength, seismic codes, structural deficiencies, transverse reinforcement detailing, and number of story on seismic performance of low and mid-rise RC buildings. Capacity curves of building sets are obtained by nonlinear static analyses conducted in two principal directions, resulting in 144 models. The inelastic dynamic characteristics are represented by "equivalent" Single-Degree-of- Freedom (ESDOF) systems using obtained capacity curves of buildings. Nonlinear time history analysis is used to estimate displacement demands of representative building models idealized with (ESDOF) systems subjected to the selected ground motion records from past earthquakes in Turkey. The results show that the significant number of pre-modern code 4- and 7-story buildings exceeds LS performance level while the modern code 4- and 7-story buildings have better performances. The findings obviously indicate the existence of destructive earthquakes especially for 4- and 7-story buildings. Significant improvements in the performance of the buildings per modern code are also obvious in the study. Almost one third of pre-modern code buildings is exceeding LS level during records in the past earthquakes. This observation also supports the building damages experienced in the past earthquake events in Turkey.

• ETRI Journal
• /
• v.28 no.5
• /
• pp.672-675
• /
• 2006

The effect of block interleaving in a low density parity check (LDPC)-turbo concatenated code is investigated in this letter. Soft decoding can be used in an LDPC code unlike the conventional Reed-Solomon (RS) code. Thus, an LDPC-turbo concatenated code can show better performance than the conventional RS-turbo concatenated code. Furthermore, the performance of an LDPC-turbo code can be improved by using a block interleaver between the LDPC and turbo code. The average number of iterations in LDPC decoding can also be reduced by a block interleaver.