• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.2
• /
• pp.317-325
• /
• 2012

In this paper, we consider the encoding scheme of Low Density Parity Check codes. In particular, using the Jacket Pattern and circulant permutation matrices, we propose the simple encoding scheme of Richardson's lower triangular matrix. These encoding scheme can be extended to a flexible code rate. Based on the simple matrix process, also we can design low complex and simple encoders for the flexible code rates.

• 한국연소학회:학술대회논문집
• /
• 2002.11a
• /
• pp.97-104
• /
• 2002

The conventional regenerative system has a high thermal efficiency as well as energy saving using the high preheated combustion air. in spite of these advantages, it can not avoid high nitric oxide emissions. Recently, flameless combustion has received much attention to solve these problems. In this research, numerical analysis is performed for flow-combustion phenomena in the self regenerative burner. In this analysis we used Fluent 6.0 code. the that is developed for commercial use, Methane gas is used as a fuel and two-step reaction model for methane and Zeldovich mechanism for NO generation are used. the velocity of the preheated combustion air is used as a parameter and we analyze the characteristics of flow-field, temperature distributions and NO emissions. Due to the increased recirculation rate, the maximum temperature of flame is significantly increased and NOx emissions is reduced

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.1C
• /
• pp.1-8
• /
• 2005

In this paper, we present a novel LDPC code construction called as semi-algebra low density parity check(LDPC) codes which is one kind of deterministic LDPC code based on dual-diagonal sub-matrix. The constructing method results in a class of high rate LDPC codes. Codes in this class have a large girth and good minimum distances. Furthermore, they can be implemented by simple parallel array architecture using cyclic shift register and perform well with the iterative decoding.

• ETRI Journal
• /
• v.37 no.4
• /
• pp.736-742
• /
• 2015

A serial concatenated decoding algorithm with dynamic threshold is proposed for low-density parity-check codes with short and medium code lengths. The proposed approach uses a dynamic threshold to select a decoding result from belief propagation decoding and order statistic decoding, which improves the performance of the decoder at a negligible cost. Simulation results show that, under a high SNR region, the proposed concatenated decoder performs better than a serial concatenated decoder without threshold with an Eb/N0 gain of above 0.1 dB.

• Journal of Communications and Networks
• /
• v.17 no.2
• /
• pp.157-161
• /
• 2015

A new block low-density parity-check (Block-LDPC) code based on quadratic permutation polynomials (QPPs) is proposed. The parity-check matrix of the Block-LDPC code is composed of a group of permutation submatrices that correspond to QPPs. The scheme provides a large range of implementable LDPC codes. Indeed, the most popular quasi-cyclic LDPC (QC-LDPC) codes are just a subset of this scheme. Simulation results indicate that the proposed scheme can offer similar error performance and implementation complexity as the popular QC-LDPC codes.

• Corrosion Science and Technology
• /
• v.18 no.5
• /
• pp.190-195
• /
• 2019

SA508 low-alloy steel for a reactor vessel was exposed to primary water in a pressurized water reactor (PWR) plant because the cladding layer of type 309 stainless steel for the RPV was removed, due to an accident in which the detachment of the thermal sleeve occurred. The major advantage of the electrochemical deposition (ECD) Ni plating technique is that the reactor pressure vessel can be repaired without significant thermal effects, and Ni has solid corrosion resistance that can withstand boric acid. The corrosion rate assessment of the damaged part was performed, and its trend was analyzed. Essential variables of the Ni plating for repair of the damaged part were derived. These conditions are applicable variables for the repair plating device, and have been carefully adjusted using the repair plating device. The process for establishing ASME technical standards called Code Case N-840 is described. The process of developing Ni-plating devices, and the electroplating procedure specification (EPS) are described.

• Journal of Radiation Protection and Research
• /
• v.25 no.2
• /
• pp.81-87
• /
• 2000

XOQ_DW code is currently used to assess the atmospheric dispersion fur the routine releases of radioactive gaseous effluents at Yonggwang nuclear power plants. This code was developed based on XOQDOQ code and an additional code is required to assess the atmospheric dispersion for potential accidental releases. In order to assess the atmospheric dispersion fer the accidental releases, XOQAR code has been developed by using PAVAN code that is based on Reg. Guide 1.145. The terrain data of XOQ_DW code inputs and the relative concentrations (X/Q) of XOQ_DW code outputs are used as the inputs of the XOQAR code through the interface with XOQ_DW code. By using this code, the maximum values of X/Q at exclusion area and low population zone boundaries except for sea areas were assessed as $1.33{\times}10^{-4}$ and $7.66{\times}10^{-6}$ sec/$m^3$, respectively. Through the development of this code, a rode system is prepared for assessing the atmospheric dispersion for the accidental releases as well as the routine releases. This developed code ran be used for other domestic nuclear power plants by modifying the terrain input data.

• Journal of Korean Home Economics Education Association
• /
• v.24 no.1
• /
• pp.49-59
• /
• 2012

This research aimed at identifying the influential factors on high school students' dress code compliance. Specifically, the relationship between the perceived strength and importance of dress codes and dress code compliance, and the relationship between dress code compliance and creativity, self esteem, and school adaptation were examined. For this purpose, reliability tests, multiple regressions, and t-tests were conducted using the data collected from 866 male and female students from six Co-Ed high schools located in Seoul. The results are as follows. First, the more students perceived the school dress codes to be stronger and more important, they were more likely to comply to the dress codes. Second, compared to the low-compliance group, the high-compliance group had higher self-esteem and creativity. Third, compared to the low-compliance group, the high-compliance group showed better adaptation to their teachers, classes, and school rules. However, the two groups were not significantly different in terms of their adaptation to peer groups.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.3
• /
• pp.231-241
• /
• 2022

Objectives: The purpose of this study is to evaluate the input status of exposure-related information in the working environment monitoring database (WEMD) and special health examination database (SHED) for the construction of a national exposure surveillance system. Methods: The industrial and process code input status of WEMD and SHED for 21 carcinogens from 2014 to 2016 was compared. Data from workers who performed both work environment monitoring and special health examinations in 2019 and 2020 were extracted and the actual status of input of industrial and process codes was analyzed. We also investigated the cause of input errors through a focus group interview with 12 data input specialists. Results: As a result of analyzing WMED and SHED for 21 carcinogens, the five-digit industrial code matching rate was low at 53.5% and the process code matching rate was 19% or less. Among the data that simultaneously conducted work environment monitoring and special health examination in 2019 and 2020, the process code matching rate was very low at 18.1% and 5.2%, respectively. The main causes of exposure-related data input errors were the difference between the WEMD and SHED process code input systems from 2020, the number of standard process and job codes being too large, and the inefficiency of the standard code search system. Conclusions: In order to use WEMD and SHED as a national surveillance system, it is necessary to simplify the number of standard code input codes and improve the search system efficiency.

• Journal of the Korean Data and Information Science Society
• /
• v.14 no.3
• /
• pp.525-533
• /
• 2003

In this paper we introduce some existing preprocessing algorithm for character recognition and consider feature extraction method for the recognition of low resolution document. Image recognition of low resolution document including fax images can be frequently misclassified due to the blurring effect, slope effect, noise and so on. In order to overcome these difficulties in the character recognition we considered a mesh feature extraction and contour direction code feature. System for automatic character recognition were suggested.