• 방사성폐기물학회지
• /
• 제20권1호
• /
• pp.127-131
• /
• 2022

The structural safety of prototype transport and storage containers for very low-level radioactive liquid waste was experimentally estimated for its localization development. Transport containers for radioactive liquid waste have been researched and developed, however, there are no standardized commercial containers for very low-level radioactive waste in Korea. In this study, the structural safety of the designated IP-2 type container capable of transporting and temporarily storing large amounts of very low-level liquid waste, which is generated during the operation and decommissioning of nuclear power plants, was demonstrated. The stacking and drop tests, which were conducted to determine the structural integrity of the container, verified that there was no external leakage of the contents in spite of its structural deformation due to the drop impact. This study shows the effort required for the localization of the technology used in manufacturing transport and storage containers for very low-level radioactive liquid waste, and the additional structural reinforcement of the container in which the commercial intermediate bulk container (IBC) external frame was coupled.

• 한국포장학회지
• /
• 제29권3호
• /
• pp.203-209
• /
• 2023

The increasing saturation challenges in storage facilities for Low- and Intermediate-Level Radioactive Waste call for a more efficient storage approach. Consequently, we have developed a square-structured container that features a storage capacity approximately 20% greater than that of conventional drum-type containers. Considering the need to contain various radioactive wastes from nuclear power usage securely until they no longer pose a threat to human health or the environment, this study focuses on evaluating the sealing efficacy of the newly designed rectangular container using finite element analysis. Since radioactive waste containers typically do not experience external forces except under special circumstances, our analysis simulated the impact of an external force, assuming a fall scenario. After fastening the bolts, we examined the vertical stress distribution on the container by applying the calculated external force. The analysis confirms the container's stable seal.

• Nuclear Engineering and Technology
• /
• 제53권5호
• /
• pp.1524-1533
• /
• 2021

The structural stability of a waste package is essential for containing radioactive waste for the long term in a repository. A silo-type disposal facility would require more severe verification for the structural integrity, because of radioactive waste packages staked with several tens of meters and overburdens of crushed rocks and shotcretes. In this study, structural safety was analyzed for a silo-type repository, located approximately 100 m below sea level in Gyeongju, Korea. Finite element simulation was performed to investigate the influence of the loads from the backfilling materials and waste package stacks on the mechanical stress of the disposed of wastes and containers. It was identified that the current design of the waste package and the compressive strength criterion for the solidified waste would not be enough to maintain structural stability. Therefore, an enhanced criterion for the compressive strength of the solidified waste and several reinforced structural designs for the disposal concrete container were proposed to prevent failure of the waste package based on the results of parametric studies.

• 방사성폐기물학회지
• /
• 제18권4호
• /
• pp.537-548
• /
• 2020

Currently, radioactive waste for disposal has been restricted to low and intermediate level radioactive waste generated during operation of nuclear power plants, and these radioactive wastes were managed and disposed of the 200 L and 320 L of steel drums. However, it is expected that it will be difficult to manage a large amount of decommissioning waste of the Kori unit 1 with the existing drums and transportation containers. Accordingly, the KORAD is currently developing various and large-sized containers for packaging, transportation, and disposal of decommissioning waste. In this study, the radiation exposure doses of workers and the public were evaluated using RADTRAN computational analysis code in case of the domestic on-road transportation of new package and transportation containers under development. The results were compared with the domestic annual dose limit. In addition, the sensitivity of the expected exposure dose according to the change in the leakage rate of radionuclides in the waste packaging was evaluated. As a result of the evaluation, it was confirmed that the exposure dose under normal and accident condition was less than the domestic annual exposure dose limit. However, in the case of a number of loading and unloading operations, working systems should be prepared to reduce the exposure of workers.

• 방사성폐기물학회지
• /
• 제18권2_spc호
• /
• pp.317-325
• /
• 2020

한국원자력환경공단은 처분시설 내 1단계 인수·저장구역의 인수검사 공간 및 드럼 취급 공간 부족에 대한 문제를 해결하기 위하여 방폐물검사건물을 건설하여 저장·처리능력을 확충할 예정이다. 본 연구에서는 MCNP 코드를 이용하여 방폐물검사건물 내 저장구역에서 취급하는 해체 방사성폐기물 대상 신형처분용기를 대상으로 작업종사자의 피폭선량을 평가하였다. 평가결과, 시설 내 저장 가능한 최대 용기 개수(304개)와 방사선작업에 대한 연간 예상 작업시간(약 306시간)에 대하여 연간 집단선량은 총 84.8 man-mSv로 계산되었다. 시설 내 총 304개의 신형처분용기(소형/중형 타입)가 저장 완료된 시점에서 인수검사, 처분검사를 위한 작업종사자의 투입인력은 총 25명, 작업종사자 당 예상피폭선량은 연평균 3.39 mSv로 산출되었다. 소형용기 취급 시 작업종사자의 고방사선량 작업에 따른 작업효율과 방사선적 안전성 확보를 위해서는 콘크리트 라이너의 두께를 증가시키는 추가적인 차폐가 필요할 것으로 평가되었다. 향후 본 연구를 바탕으로 실측기반의 해체폐기물의 선원항과 특성을 활용하여 방사선작업 당 작업시간 및 투입인력을 산출함으로써 작업종사자의 최적의 방사선작업조건을 도출할 수 있을 것으로 사료된다.

• 방사성폐기물학회지
• /
• 제10권1호
• /
• pp.37-43
• /
• 2012

IAEA 및 국내의 방사성물질 운반 관련 규정에 따라 중 저준위 방사성폐기물 드럼 8개를 운반할 수 있는 IP-2형 운반용기를 개발하였다. IP-2형 운반용기는 낙하시험 및 적층시험을 거친 후 내용물의 유실 또는 분산과 운반용기 외부표면에서의 방사선량률이 20 % 이상 증가할 수 있는 차폐능력의 상실이 없어야 한다. 본 연구의 목적은 적층시험조건에 대한 시험방법 및 절차를 수립하고 IP-2형 운반용기의 적층조건에 대한 구조적 건전성을 평가하는데 있다. 운반용기의 원형시험모델을 이용하여 운반용기 중량의 5배 하중으로 24시간 동안 압축하는 적층조건에 대한 시험 및 전산해석을 수행하였다. 적층시험 시 운반용기의 모서리기둥에서의 변형률 및 변위를 측정하였으며, 측정된 변형률 및 변위는 해석결과와 서로 일치하였다. 컨테이너 바닥부의 처짐량은 측정이 어렵기 때문에 전산해석 방법으로 구하였다. 모서리기둥의 최대 변위와 컨테이너 바닥의 최대 처짐은 법규에서 규정하는 허용치에 비하여 낮게 나타났다. 적층시험 전 후에는 운반용기의 외형치수, 차폐체 두께, 볼트토크 등을 측정하였으며, 그 값들을 비교분석한 결과 운반용기는 내용물의 유실 및 분산, 차폐체 두께의 감소가 나타나지 않았다. 따라서 적층시험조건에서 IP-2형 운반용기의 구조적 건전성이 입증되었다.

• 방사성폐기물학회지
• /
• 제18권4호
• /
• pp.439-455
• /
• 2020

Numerical model was developed that simulates radionuclide (3H and 14C) transport modeling at the 2nd phase facility at the Wolsong LILW Disposal Center. Four scenarios were simulated with different assumptions about the integrity of the components of the barrier system. For the design case, the multi-barrier system was shown to be effective in diverting infiltration water around the vaults containing radioactive waste. Nevertheless, the volatile radionuclide 14C migrates outside the containment system and through the unsaturated zone, driven by gas diffusion. 3H is largely contained within the vaults where it decays, with small amounts being flushed out in the liquid state. Various scenarios were examined in which the integrity of the cover barrier system or that of the concrete were compromised. In the absence of any engineered barriers, 3H is washed out to the water table within the first 20 years. The release of 14C by gas diffusion is suppressed if percolation fluxes through the facility are high after a cover failure. However, the high fluxes lead to advective transport of 14C dissolved in the liquid state. The concrete container is an effective barrier, with approximately the same effectiveness as the cover.

• 방사선산업학회지
• /
• 제18권1호
• /
• pp.95-100
• /
• 2024

To establish a radioactive waste life cycle history management system, a series of processes including waste generation, classification, packaging, storage, transportation, and disposal were reflected in the information management system. A preliminary review process was introduced to reduce the amount of radioactive waste generated and manage it efficiently. Through this, the amount of radioactive waste generated must be checked from the beginning of the research, and the generated radioactive waste must be thoroughly managed from the stage of generation to final disposal. In particular, in the case of radioactive waste data generated during nuclear facility operation and each experiment, a radioactive waste information management system must be operated to receive information from the waste generator and integrate it with processing information at the management stage. The application process for small-package containers was reflected so that information such as the generation facility of radioactive waste, generation facility, project information, types of radioactive waste, major radionuclides, etc. In the radioactive waste management process, the preceding steps are to receive waste history from the waste generators. This includes an application for a specified container with a QR label, pre-inspection, and management request. Next, the succeeding steps consist of repackaging, treatment, characterization, and evaluating the suitability of disposal, for a process to transparently manage radioactive wastes.

• 자원환경지질
• /
• 제49권4호
• /
• pp.301-314
• /
• 2016

국내에서 발생한 폐밀봉선원은 현재 한국원자력환경공단 폐기시설에 임시 보관 중에 있으며 향후 중 저준위 방사성 폐기물 처분시설에 처분될 예정이다. 본 연구에서는 폐밀봉선원의 최적 처분방안 수립에 앞서 폐밀봉선원 처분시 폐쇄후 예비안전성평가를 수행하였다. 폐밀봉선원이 표층처분시설 또는 동굴처분시설에 처분되는 것으로 가정하였으며, GoldSim 전산코드를 사용하여 결정집단의 개인 피폭선량을 계산하였다. 평가결과 정상 시나리오시 최대 피폭선량은 두 가지 처분방식에 대해 약 $1{\times}10^{-7}mSv/yr$으로 나타났으며 이는 규제치인 0.1 mSv/yr에 대비하여 장기적으로 충분한 안전성을 확보할 수 있는 것으로 판단된다. 우물시나리오 시 최대 피폭선량은 표층처분시설에서 규제치인 1 mSv/yr를 초과하였으며 이는 $^{226}Ra$, $^{210}Pb$($^{226}Ra$의 딸핵종) 및 $^{237}Np$($^{241}Am$의 딸핵종)에 기인한 것으로 확인되었다. 동굴처분시설의 경우, 모든 핵종의 최대 피폭선량이 법적 규제치를 만족하나 $^{14}C$ 및 $^{237}Np$($^{241}Am$의 딸핵종)에 의한 피폭선량이 규제치 대비 10%를 초과하는 상대적으로 높은 값을 나타내는 것으로 확인되었다. 처분시설 폐쇄후 주민의 피폭선량은 반드시 법적 규제치 이하로 유지되어야 하므로 규제치를 초과 또는 이에 근접한 피폭선량을 유발하는 핵종인 $^{14}C$, $^{226}Ra$ 및 $^{241}Am$를 각 처분방식에서 제한할 필요가 있으며 안전한 영구 처분을 위한 처분전 관리가 요구된다.