• 한국환경복원기술학회지
• /
• 제23권1호
• /
• pp.1-14
• /
• 2020

In this study, we 1) identified the damaged areas along the south limit line (SLL) of the demilitarized zone (DMZ) by the military's 'DMZ barren land campaign', and 2) categorized the identified damaged areas into a few ecological types. Using high-resolution satellite images, we delineated the total damaged areas to be 1,183.2 ha, which accounted for 50.1% of the 100-m northern buffer regions from the SLL. Of the total damaged areas, 16% were severely damaged, i.e., they had been damaged until recently and so remained barren without vegetation cover. In other areas, the levels of damage were either moderate (59.9%) or slight (24.1%), due to natural succession that turned those areas to grassland or forest. Using satellite image-derived land cover maps and climatic and topographic data, we categorized the damaged areas into seven types: lowland grassland (19.8%), western lowland forest (21.4%), low-altitude forest (25.5%), mid-altitude forest (18.4%), high-altitude forest (6.8%), vicinity in east coast (7.9%), and waterbody (0.2%). These types can be used to identify proper measures to restore ecosystems in the DMZ for now and after Korean reunification.

• 한국추진공학회지
• /
• 제20권4호
• /
• pp.59-67
• /
• 2016

작동 고도에 따라 노즐 내부에서 박리유동이 발생 또는 미발생 하는 관통형 핀틀노즐의 추력의 특성을 파악하기 위해 수치적 연구를 수행하였다. 난류모델은 저 레이놀즈 수 $k-{\varepsilon}$ 모델과 압축성 보정 모델인 Sarkar 모델을 적용하여, 핀틀 노즐의 내부 유동장을 관찰하고 노즐 벽면에서의 압력을 실험데이터와 비교하였다. 작동고도가 높아질수록 외기의 압력은 낮아지므로 낮은 고도에서의 유동 박리는 사라지고 제트의 팽창은 커진다. 추력특성을 분석하기 위해 추력을 추력의 모멘텀항과 압력항으로 나누어 분석하였다. 고도가 높아질수록 저고도에서의 박리로 인해 감소된 압력회복이 증가하고, 추력의 압력항이 증가하여 추력과 추력계수는 증가한다. 고도 20 km 조건에서는 지상에 비해 추력과 추력계수가 약 9% 증가한다.

• 한국군사과학기술학회지
• /
• 제21권6호
• /
• pp.799-806
• /
• 2018

In this paper, we analyzed the communication distances in the flat and spherical earth model using the main specifications of the wireless communication device under development to be installed in the unmanned surface vehicle(USV). We installed the wireless communication device on the test ship and the actual communication test was performed in the South Sea of Korea, it compared the experimental result with the simulated results. If the installation altitude of the transmitting and receiving antennas is low, there is not the big difference between the two models. However, when the altitude of one of the two antennas is high, the spherical earth model has similar results to the experimental data. As the altitude of the antenna installation increases, fading occurs in a certain section. We expect that this fading can be overcome through antenna technologies such as space diversity.

• 한국지형학회지
• /
• 제27권1호
• /
• pp.33-45
• /
• 2020

A number of unconsolidated deposits, consisting of a layer of gravels and silt, are found in Dangjeong-ri, Seocheon-gun in the western coast. From below in the stratigraphic sequence, the gravel layer ranging up to a maximum thickness of about 2 meters is interpreted as being formed by fluvial processes of an old channel (Dangjeong S.), and the overlying silt or sandy silt layer of 2 to 3 thickness meters is assumed to be emerged paleo-tidal sediments which was deposited in low tidal-energy environments. As the results of rock surface IRSL datings, the depositional ages of gravels are confirmed as ca. 78,000 ~ 83,000 years BP, indicating that the layer was formed in response to a high-stand sea level of MIS 5a along the Dangjeongcheon estuary. It is presumed that the relative height of 4.5 meter between the altitude of the stream bed (9.5 m) and the altitude of the bedrock boundary in the gravel layer (14 m) indicates the uplift amount since deposition. Paleo-sedimentary environments and an altitude of paleo-shoreline in the study area will be discussed with additional age dating focused on the silt layer.

• 국제학술발표논문집
• /
• The 5th International Conference on Construction Engineering and Project Management
• /
• pp.397-402
• /
• 2013

In super-tall building construction projects, schedule risk factors which vertically change and are not found in the low and middle-rise building construction influence duration of a project by vertical attribute; and it makes hard to estimate activity or overall duration of a construction project. However, the existing duration estimating methods, that are based on quantity and productivity assuming activities of the same work item have the same risk and duration regardless of operation space, are not able to consider the schedule risk factors which change by the altitude of operation space. Therefore, in order to advance accuracy of duration estimation of super-tall building projects, the degree of changes of these risk factors according to altitude should be analyzed and incorporated into a duration estimating method. This research proposes a simulation model using Monte Carlo method for estimating activity duration incorporating schedule risk factors by weather conditions in a super-tall building. The research process is as follows. Firstly, the schedule risk factors in super-tall building are identified through literature and expert reviews, and occurrence of non-working days at high altitude by weather condition is identified as one of the critical schedule risk factors. Secondly, a calculating method of the vertical distributions of the weather factors such as temperature and wind speed is analyzed through literature reviews. Then, a probability distribution of the weather factors is developed using the weather database of the past decade. Thirdly, a simulation model and algorithms for estimating non-working days and duration of each activity is developed using Monte-Carlo method. Finally, sensitivity analysis and a case study are carried out for the validation of the proposed model.

• 대한기계학회논문집B
• /
• 제32권2호
• /
• pp.83-91
• /
• 2008

A three-dimensional computation was conducted to understand effects of the low Reynolds number on the performance in a low-speed axial compressor at the design condition. The low Reynolds number can originates from the change of the air density because it decreases along the altitude in the troposphere. The performance of the axial compressor such as the static pressure rise was diminished by the separation on the suction surface with full span and the boundary layer on the hub, which were caused by the low Reynolds number. The total pressure loss at the low Reynolds number was found to be greater than that at the reference Reynolds number at the region from the hub to 85% span. Total pressure loss was scrutinized through three major loss categories in a subsonic axial compressor such as the profile loss, the tip leakage loss and the endwall loss using Denton#s loss model, and the effects of the low Reynolds number on the performance were analyzed in detail.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2007년도 춘계 학술대회논문집
• /
• pp.138-141
• /
• 2007

A three-dimensional computation was conducted to understand effects of the low Reynolds number on the performance in a low-speed axial compressor at the design condition. The low Reynolds number can originates from the change of the air density became it decreases along the altitude in the troposphere. The performance of the axial compressor such as the static pressure rise wag diminished by the separation on the suction surface and the boundary layer on the hub, which were caused by the low Reynolds number. The total pressure loss at the low Reynolds number was found to be greater than that at the reference Reynolds number at the region from the hub to 90% span. Total pressure loss was scrutinized through three major loss categories in a subsonic axial compressor such as profile loss, tip leakage loss and endwall loss using Denton's loss model, and effects of the low Reynolds number on the performance were analyzed in detail.

• 한국지형학회지
• /
• 제21권4호
• /
• pp.1-17
• /
• 2014

본 연구는 우리나라의 12개 기반암 지역과 24개 산지와 곡지를 대상으로 지형 기복 특성을 분석하고, 이를 토대로 기반암과 지형 기복 간의 특성 및 관계를 다음의 4가지로 유형화하였다. 1) 편마암-고 산지와 화강암-고의 전체, 산지, 곡지는 지반 융기로 인하여 하천의 하각 작용은 활발하지만, 삭박의 영향이 사면 전체에 전달되지 못하여, 매우 높은 해발고도에 비해 기복과 경사는 상대적으로 크지 않다. 2) 편마암-고 전체, 곡지, 편마암-중 산지, 편암-산지, 화강암-중 산지, 화산암 전체, 산지, 퇴적암-고(역암) 전체, 산지, 곡지, 퇴적암-중(사암, 셰일) 산지, 석회암 전체, 산지 지역은 하천 침식과 사면 운반 작용이 활발하지만, 풍화 침식에 대한 저항력이 강한 기반암이나 지질 구조를 가져서 지형 기복이 큰 편이다. 3) 편마암-중 전체, 곡지, 편암-전체, 곡지, 화강암-중 전체, 곡지, 화산암 곡지, 퇴적암-중 전체, 곡지, 퇴적암-저(셰일) 산지, 석회암 곡지 지역은 풍화 침식에 대한 저항력이 약하며, 사면과 하곡에서 풍화, 사면 운반, 하천의 침식, 운반, 퇴적 작용이 진행되어, 지형 기복이 작은 편이다. 4) 편마암-저 전체, 산지, 곡지, 화강암-저 전체, 산지, 곡지, 퇴적암-저 전체, 곡지 지역은 고도가 낮은 해안에 위치하여, 하천의 침식 작용과 활발한 사면 운반작용은 거의 발생하지 않아, 지형 기복이 매우 작다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 춘계학술대회논문집
• /
• pp.90-96
• /
• 2009

In this study, a generic airfoil designed by the inverse method was evaluated with several candidate airfoils as a first step. Each airfoil was compared with respect to aerodynamic performance to meet the requirement of HALE(high altitude long endurance) aircraft. The second step was to optimize the candidate airfoil using the couple of optimization formulations to down select an optimum airfoil. For the analysis of low Reynolds number 2D flow, Drela's MSES was used. After comparing the aerodynamic results, the best airfoil was chosen to construct the baseline 3D wing. The Navier-Stokes code was used to evaluate the overall aerodynamic performance of designed wing with other wings. The results show that the designed wing has the best performance compared with other wings.

• International Journal of Aerospace System Engineering
• /
• 제4권2호
• /
• pp.5-9
• /
• 2017

In a pressurized fuel supply system of aircraft, a flow passage opening device is required to keep fuel continuously transferred from one tank to the other. The device utilizes balancing weights in order to follow up an acceleration at special conditions such as negative g. It is very difficult to test the device in a real high-speed and high-altitude test since severe test conditions and expensive supports are needed. Therefore, this paper deals with performance analysis of a flow passage opening device through low speed aircraft captive flight tests (CFT) including roll and negative-g maneuvers. It is shown that balancing weights in the device can open the passage in accordance with fuel position.