• 열처리공학회지
• /
• 제8권4호
• /
• pp.245-254
• /
• 1995

The purpose of this study was to examine the effects of low melting point phase(LMPP) on mechanical properties in the Al-Cu-Li-X(In, Be) alloys. This study was performed by the differential scanning calorimetry(DSC), the transmission electron microscope(TEM), hardness test, tensile test and notch tensile test. The shape of LMPP in the specimens homogenized at $570^{\circ}C$ was film type due to remelting at grain boundary during homogenization. Low melting point phases had no effects on mechanical properties in the aging treated materials, because the density of LMPPs was low. Mechanical properties of the aging treated materials were affected by the density of matrix precipitation phases and grain sizes. For the In or In, Be added Al-Cu-Li alloys, the optimum solution treatment temperature was $550^{\circ}C$. The strength of Al-Cu-Li-In-Be $T_6$ treated alloy was higher than that of 2090-$T_8$ alloy.

• International Journal of Automotive Technology
• /
• 제4권2호
• /
• pp.95-100
• /
• 2003

Automobile industry has been developed rapidly as a key manufacturing industry in Korea. Meanwhile, air pollution is getting worse noticeably than ever. In the diesel emission, PM (Particulate Matter) and NOx (Nitrogen Oxides) have been exhausted with a great amount and the corresponding emission regulations are getting stringent. In order to develop low emission engines, it is necessary to research on better qualified fuels. Sulfur contained in fuel is transformed to sulfur compound by DOC (Diesel Oxidation Catalyst) and then it causes to the increase of sulfate-laden PM on the surface of catalyst. In this research, ULSD (Ultra Low Sulfur Diesel) is used as a fuel and some experimental results are investigated. ULSD can reduce not only PM but also gas materials because cetane value, flash point, distillation 90%, pour point and viscosity are improved in the process of desulfurization. However, excessively reduced sulfur may cause to decease lubricity of fuel and engine performance in fuel injection system. Therefore, it requires only modest adjusted amount of sulfur can improve engine performance and DOC, as well as decrease of emission.

• 한국전기전자재료학회논문지
• /
• 제31권6호
• /
• pp.427-432
• /
• 2018

High-capacity secondary batteries can cause explosion hazards owing to microcurrent variations or current surges that occur in short circuits. Consequently, complete safety cannot be achieved with general protection that is limited to a mere current fuse. Hence, in the case of secondary batteries, it is necessary for the protector to limit the inrush current in a short circuit, and to detect the current during microcurrent variations. To serve this purpose, a fuse can be employed for the secondary battery protection circuit with current detection. This study aims at designing a protection device that can stably operate in the hazardous circumstances associated with high-capacity secondary batteries. To achieve the said objective, a detecting fuse was designed from an alloy of low melting point elements for securing stability in abnormal current states. Experimental results show that the operating I-T and V-T characteristic constraints can be satisfied by employing the proposed current detecting self-contained low melting point fuse, and through the resistance of the heating resistor. These results thus verify that the proposed protection device can prevent the hazards of short circuit current surges and microcurrent variations of secondary batteries.

• 전기전자학회논문지
• /
• 제25권4호
• /
• pp.697-702
• /
• 2021

고속 푸리에 변환(Fast Fourier Transform, FFT)은 다양한 응용처에서 널리 사용되는 주요 신호처리 블록이다. 일반적으로 1024 포인트 이상의 긴 FFT 처리의 경우 높은 SQNR(Signal-to-Quantization Ratio)를 유지하면서도 낮은 하드웨어 복잡도의 구현이 매우 중요하다. 본 논문에서는 낮은 복잡도의 FFT 알고리즘과 간단한 동적스케일링 기법을 제시한다. 이를 통해 2048 포인트 FFT연산에 대해서 널리 알려진 radix-2 알고리즘에 비해 곱셉기의 수를 절반으로 줄일 수 있으며, 또한 twiddle factor를 저장하기 위해 필요한 테이블의 크기를 radix-2 및 radix-2² 알고리즘에 비해 각각 35% 및 53%로 축소할 수 있다. 그리고 내부 데이터의 폭을 점진적으로 늘리지 않고서도 55dB 이상의 높은 SQNR을 달성하는 것을 확인하였다.

• 여성건강간호학회지
• /
• 제8권4호
• /
• pp.608-618
• /
• 2002

The purpose of this study is to analyze the type of ego states and stress coping style on female college students who are in the course of nursing study. This study is performed in the view of Transactional Analysis and designed to scrutinize descriptive correlations between the type of ego states and stress coping style. The subject is consists of 144 freshmen and sophomore, 138 junior and senior students group, who are students of K nursing college located in Seoul. The sampling investigation period is on Sept. 14, 2002 to Oct. 26, 2002. The measuring instrument used for Transactional Analysis ego state is 50 items Ego-gram research paper devised by Dusay(1997). For studying coping style, Folkman & Lazarus's measurement(1984) was adopted, which is translated and modified by Han, and Oh,(1990). Statistic average and standard deviation were generated by using SPSS PC+, t-test and Pearson correlation. The results were as follows: 1) In the type of ego states on both groups(lower group : freshmen, sophomore upper group : junior, senior) indicated the arithmetic apex NP(maximum value), then the point A was high and the data made a down slope to point AC. In the comparison to type of ego states between two groups, only at point CP, the data value of upper year students represented higher than that of lower year ones by C(t=2.28, p=.023). In the psychological energy level of ego states, both groups indicated average level.2) Stress coping style of whole students were highly and affirmatively dedicated to research. Consecutive consequences follow like this(high to low) : the central point of problem, search for social support, hopeful aspect and indifference. Especially hopeful aspect(t=.67, p=.05), relaxation of tension(t=-2.16, p=.03) made significant difference each other in the view of arithmetic calculation 3) While verifying coping style in terms of ego states level between lower and upper students group, In type CP, high level ego states group indicated significant difference on stress coping style area than low leveled group and made such sequences as the central point of problem, hopeful aspect, search for social support, positive interest and relaxation of tension. In type NP, sequences such as the central point of problem, search for social support, positive interest and relaxation of tension were emerged with little differences. In type A, the central point of problem, positive interest and relaxation of tension. In type FC, hopeful aspect, search for social support, positive interest and relaxation of tension. In type AC, hopeful aspect and indifference were derived significantly different(p<.05). 4) In the aspect of relation between ego states and coping style, type CP presented the central point of problem and relaxation of tension, type NP presented positive interest, search for social support and the central point of problem, type A showed the central point of problem, positive interest and relaxation of tension, type FC showed relaxation of tension, positive interest, search for social support, indifference and the central point of problem, type AC showed hopeful aspect, indifference and the central point of problem. All the sequence shown above had high-to-low procedure and represented static relations each other(p<.05).

• 한국조사연구학회지:조사연구
• /
• 제4권2호
• /
• pp.63-86
• /
• 2003

본 연구의 목적은 서울과 그 인근 지역에서 수돗물의 질을 끌이지 않고도 마실 수 있는 수준으로 개선한다는 가정 아래 이에 대 한 지불의사액을 결정하고자 할 때 가상상황 가치평가 기법의 입찰게임에서 출발점 편의의 존재 여부를 검정하는 것이다. 모든 가상상황 가치평가 기법 가운데 입찰게임이 가장 정상가격을 얻는 데 가깝기 때문에 지불의사액(WTP)을 절정하기 위하며 3가지(저$.$중$.$고)의 서로 다른 입찰값의 출발점 그룹을 사용하였다. 응답자들은 출발점에 무작위적으로 배정되었고 사전 검사된 면접설문지를 사용하였다. 출발점 편의의 증거를 밝히기 위하여 비모수적 검정과 로짓(Logit)모델을 사용하였다. 본 연구에서는 높은 출발점 집단에서는 높은 지불의사액을, 낮은 집단에서는 낮은 지불의사액을 나타내었으며 이것은 출발점 편의의 존재를 확인하는 것이다. 출발점 편의의 문제는 지불카드나 입찰게임 없이 응답자에게 최대 지불의사액을 직접 질문함으로써 회피할 수 있다. 그러나 이러한 질문은 대답하기에 아주 어렵고, 무응답을 증가시키며 비현실적인 것이 될 수 있다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.539-544
• /
• 2002

Titanium and titanium alloy are excellent in corrosion resistance and specific intensity, and also in the biocompatibility. On the other hand, the brazing is bonding method of which productivity and reliability are high, when the complicated and precise structure of the thin plate is constructed. However, though conventional titanium-based brazing filler metal was excellent in bond strength and corrosion resistance, it was disadvantageous that metal structure and mechanical property of the base metal deteriorated, since the brazing temperature (about 1000 C) is considerably high. Authors developed new brazing filler metal which added Zr to Ti-Cu (-Ni) alloy which can be brazed at 900 C or less about 15 years ago. In this paper, the development of more low-melting-point brazing filler metal was tried by the addition of the fourth elements such as Ni, Co, Cr for the Ti-Zr-Cu alloy. As a method for finding the low-melting-point composition, eutectic composition exploration method was used in order to reduce the experiment point. As the result, several kinds of new brazing filler metal such as 37.5Ti-37.5-Zr-25Cu alloy (melting point 825 C) and 30Ti-43Zr-25Cu-2Cr alloy (melting point: 825 C) was developed. Then, the brazing joint showed the characteristics which were almost equal to the base metal from the result of obtaining metallic structure and strength of joint of brazing joint. However, the brazing filler metal composition of the melting point of 820 C or less could not be found. Consequentially, it was clarified that the brazing filler metal developed in this study could be practically sufficiently used from results such as metal structure of brazing joint and tensile test of the joint.

• 한국학교보건학회지
• /
• 제4권2호
• /
• pp.119-135
• /
• 1991

The study was designed to gain necessary basic data order to grasp health knowledge, attitude, practice level of middle and high school students and to analyse th problem and to point out the method of improvement in the field of school health education. The survery was carried out through this reporter's interview for 2,400 students who attend to ten schools in Young Nam area during the period of a month from 25 the June to 25th July 1989. The result of this study can be summaried as follows. 1. The total number of answers on the question was 2,346. As for general characteristics the percent of female middle school students was 60.6% and the percent of male students was 77.7%, 45.9% of high school students was evening school students. 52.9% of middle school students and 42.3% of high school students were borne in rural area. 2. The percentage of unknown and misunderstanding for Epidemic Hepatitis infection was 46.3% of middle school students and 29.6% of high school students. 3. The percentage of unknown and misunderstanding for Epidemic Hemorrhage fever infection was 85.6% of middle school students and 66.9% of high school students. 4. The percentage of right knowledge for AIDS infection was 66.0% of middle school students and 90.4% of high school students. 5. The percentage of right knowledge for Typhoid infection was 47.8% of middle school students and 69.4% of high school students. 6. The percentage of unknown and misunderstanding for Tuberculosis infection was 71.6% of middle school students and 62.2% of high school students. 7. As for personal hygiene, the percentage of toothbrushing after every meal was high level : 44.2% of middle school students and 42.0% of high school students. 8. 60.9% of middle school students take a bath twice a week, 49.2% oh high school students take a bath a week. Times of bath of middle school students was higher than that of high school students. 9.The percentage of washing hand after using toilet was 42.1% of middle school students and 35.1% of high school students. 49.0% of middle school students and 55.1% of high school students wash hand sometimes after using toilet. 10. The percentage of change of underwear twice a week was 57.6% of middle school students and 49.8% of high school students. 11. The percentage of habit of unbalanced diet was 30.% of middle school students and 27.6% of high school students. 50.8% of middle school students and 51.7% of high school students have balanced diet. 12. Index of health practice of personal hygiene can be summarized as follows. A. A case of middle school students. 1) The percentage of health practice index in male and female was 49.6% and 48.1% respectively. Index of female students was higher than that of male students. 2) As for parent's occupation, public servants and company emplyee was upper level. Farming was low level. 3) As for income level, middle, level with 56.5% was highest in high income level and low level with 27.4% was highest in low income level. B. A case of high school students. 1) Middle level of health practice index was 46.0% of male students, upper and low level was 32.4% and 28.0% of female students respectively. 2) Middle level of health practice index was high in farming and company employee and upper level was high in commerce and service, low level with 60.0% was high in unemployed. 3) Upper practice index 35.7% appears in the rich and low practice index 38.3% appears in the poor. 13. Average points of Health practice about personal hygiene were as follows. (Full marks at 4). A. A case of middle school. Female (1.87 point) was higher than male (1.26 point). Night time (2.03 point) was higher than day time (1.66 point) and middle or small cities (2.17 point) are high than any other places. As for parent's occupation, students whose parents are company clerk get high marks (2.32) and ten students whose parent's job are service get next high marks (2.20). B. A case of high school. Female (1.53 point) was higher than male (1.22 point), as parents educational level were higher the point were higher, and as income level was higher, the points of health practice (1.78) were higher, and as for parents occupation, service get highest point (1.93) and commerce get next high point (1.86) public servant get low point (1.66). 14. The percentage of experience in smoking was 11.9% of middle school students and 60.9% of high school students. 15. The percentage of experience in inhalation of bond and administrating LSD was 4.3% of male middle school students, 8.4% of female middle school students, 6.9% of male high school students and 4.2% of female high school students. The knowledge level of communicable disease infection are very low in middle and high school students and practice level of personal hygiene are also very low. As a whole we can evaluate that middle and high school students are low level of health knowledge and practice. In conclusion, we must consider preparation for school health education program through establishing of health subjects in the carriculum, and securing of health education teachers and using materials and media program of health education. It is very important to establish macroscopic policy and strategy for public health education and to get people have right knowledge and practice for health.

• 한국자동차공학회논문집
• /
• 제5권1호
• /
• pp.129-135
• /
• 1997

Previous studies has shown that the curve of low-cycle fatigue life was not expressed with the single line subjected to Manson-Coffin's law type and bent to short life in low ${\Delta}{\varepsilon}_p$ region. The main cause of this phenomenon has been considered that the localization of plastic strain in the crack initiation process fosters the crack initiation. In this study, the low-cycle fatigue life was investigated for each specimens omitted crack initiation process and it was found that fatigue life curve in log(${\Delta}{\varepsilon}_p$)-log($N_f$)was bent in low ${\Delta}{\varepsilon}_p$ region as ever. Therefore, the main cause of appearance of knee point in fatigue life curve is not found in the crack initiation process but in the crack propagation process. In the crack propagation process, the localization of the plastic strain in the vicinity of crack tip and the influence of test environment on the crack propagation rate were observed and these inclinations were more remarkable in low ${\Delta}{\varepsilon}_p$ region. Hence, it was concluded that these two phenomena in the crack propagation process were proved to the main cause which accelerates the crack propagation in low ${\Delta}{\varepsilon}_p$ region and bent the fatigue life curve in result.

• The Korean Journal of Pain
• /
• 제12권2호
• /
• pp.195-199
• /
• 1999

Background: At present, there is no reliable objective test for the diagnosis of myofascial trigger points (MFTP). We evaluated the usefulness of skin resistance point finder for the diagnosis of MFTP. Methods: 40 subjects with clinical MFTPs at the upper trapezius muscle were included in this study. Using skin resistance point finder (UNIQUE S-2010$^{(R)}$, Seik medical, Korea), we tried to find out the point of low skin resistance. At three different current level, sensitivity and specificity of this method for the diagnosis of clinically identified MFTP was evaluated. Pressure threshold for pain of low skin resistance point was measured using Pressure Threshold Meter$^{(R)}$ (Pain Diagnostics and Thermography, U.S.A.). 3 groups of point detected at different current were compared in mean pressure threshold. Results: Fixed single current of skin resistance point finder showed variable sensitivity and specificity. But, by adjusting current level, skin resistance point finder detected all of 40 clinically identified MFTPs. Although it is partially statistically significant, the mean pressure threshold of points detected at high current was high. Conclusion: Skin resistance finder can be used as objective diagnostic tool of MFTPs. There is possibility that it can be useful in evaluating treatment effect. However, more investigation is necessary.