• 한국환경생태학회지
• /
• 제37권1호
• /
• pp.1-12
• /
• 2023

무등산국립공원의 과거(1966년)와 현재(2017년) 항공사진으로 암설사면 분포면적을 분석했고, 암설사면과 그 일대의 식생을 조사하여 암설사면의 면적 변화에 영향을 주는 식생의 특성을 알아보았다. 무등산에 외관상 보이는 암설사면의 면적은 과거보다 1/4수준까지 줄어들었다. 이곳의 암설사면은 51년 동안 식생 피복에 의해 연평균 2.3ha씩 감소했다. 특히, 저지대 완경사지에 소면적의 암설사면은 식생 피복이 활발하여 대부분이 사라졌다. 하지만 서향, 남서향, 남향 그리고 대면적의 암설사면이 남아 있었는데 이는 태양의 복사열이 암괴의 표면온도를 급속도로 상승시켜, 수분 건조에 따른 수목 생육이 불리해졌기 때문이다. 이런 입지특성 때문에 가장 넓은 덕산너덜 중간부의 소규모 식생은 인접한 산림지역과 다른 특성을 보였다. 덕산너덜에는 양지바른 곳이나 내건조성이 뛰어난 수종이 흔하게 출현했다. 하지만, 토양조건이 양호한 계곡부에 잘 자라는 호습성 수종 또한 세력이 우세했다. 이곳 일부에는 암괴 틈사이로 세립물질과 유기물 축적으로 토양층이 발달해 이런 수종이 정착해 자라는 것으로 보인다. 한편, 무등산 정상부에는 산림이 암설사면을 덮었는데 고지대에 전형적으로 자라는 신갈나무·철쭉이 우세했다. 이곳은 덕산너덜처럼 암괴 밀도가 높지 않고 토양이 드러나, 식생 발달에 유리했다고 본다. 또한 이곳에는 계곡부에 출현하는 물푸레나무와 당단풍나무의 세력이 강했다. 이는 일부 지역에 암괴들이 떨어져 아래에 쌓이면서 원지형을 오목한 형태의 함몰지형으로 만들어, 빗물 집수로 인해 토양수분이 높아졌기 때문이다. 결론적으로 암괴사면의 면적, 암괴밀도, 분포유형이 암설지형에서의 식생발달과 종조성에 지대한 영향을 미쳤다고 본다.

• 농업과학연구
• /
• 제12권2호
• /
• pp.206-241
• /
• 1985

이 연구(硏究)는 목도열병(病)의 감염시기(感染時期)와 조직내(組織內) 감염속도(感染速度) 및 감염(感染)에 영향(影響)을 미치는 전염원(傳染源)의 소재(所在), 엽초내외의 제조건(諸條件) 등(等)을 구명(究明)하여 합리적(合理的)인 방제체계(防除體系)를 확립(確立)하는 자료(資料)를 얻고자 실시(實施)하였다. 1. 벼 이삭목도열병(病)의 감염(感染) 최성기(最盛期)는 수잉기(穗孕期)였으며 그 다음이 출수기(出穗期)로 이 시기(時期)에 대부분의 이삭목이 감염(感梁)되고 있었다. 그러나 통일계(統一系) 품종(品種)은 출수후(出穗後)에도 환경(環境)에 따라 높은 감염(感染) 가능성(可能性)을 갖고 있었다. 2. 벼 이 삭목도열병(病)의 잠복기간(潛伏期間)은 자연조건하(自然條件下)에서 10~22일(日)로 그 변동복(變動福)이 넓었다. 인공접종시(人工接種時) 이삭이 어릴수록 잠복기간(潛伏期間)은 짧았고 감염속도(感染速度)가 심(甚)했으나 지엽절(止葉節) 밖으로 추출(抽出)한 이삭목은 잠복기간(潛伏期間)도 길고 발병률(發病率)도 낮았으며 조직내(組織內) 감염속도(感染速度)가 늦었다. 3. 이삭목도열병(病)의 약제방제(藥劑防除) 적기(適期)는 도열병균(稻熱病菌)의 감염(感染) 최성기(最盛期)와 잠복기간(潛伏期間)을 고려(考慮)할 때 속효성(速效性) 약제(藥齊)는 출수(出穗)5~10일전(日前), 지효성(遲效性) 약제(藥齊)는 10~15일전(日前)으로 추정(推定)된다. 4. 도열병균(病菌) 포자(胞子)의 엽초내 침투(浸透)는 주(主)로 지엽(止葉)을 포함(包含)한 상위(上位) 3개엽(個葉)에서 이루어졌고 강우(降雨)나 이슬, 일액(溢液) 등(等)과 함께 엽초 봉합부(縫合部)에서 침윤현상(浸潤現象)에 의해 이루어졌으며 침투율(浸透量)은 수도(水稻)의 생육기간중(生育期間中) 수잉기(穗孕期)가 가장 많았다. 포자(胞子)의 엽초내 침투(浸透)는 엽설(葉舌)이 크게 저지(沮止)하고 있었다. 5. 엽초내에 침투(浸透)한 포자(胞子)의 이삭에의 부착량(附着量)은 형태적(形態的)으로 복잡(複雜)한 수수절(穗首節)과 수축절(穗軸節)이 가장 많았고 이에는 모용(毛茸)와 퇴화지경(退化枝梗)이 크게 영향(影響)을 미치고 있어 이들이 목도열병(病) 감염(感染)을 조장(助長)하고 있었다. 6. 벼 이삭목도열병(病) 감염(感染) 가능(可能) 포자농도(服子濃度)는 계통간(系統間) 차이(差異)가 있어 통일계(統一系) 품종(品種)은 일반계(一般系)보다 낮은 100개(個) 이하(以下)의 포자농도(胞子濃度)에서도 쉽게 감염(感染)이 되었으며 발병지수(發病指數)도 매우 높아 그 피해(被害)가 더욱 심(甚)했다. 7. 벼 이삭목도열병(病)과 상관(相關)이 높은 이삭목의 질소함량(窒素含量)과 규소함량(硅數含量)은 벼 생육기간(生育時期)에 따라 큰 차이(差異)가 있어 질소함량(窒素含量)은 수잉기(穗孕期)에서 출수기(出穗期)로 갈수록 증가(增加)를 보였고 그 후 다소(多少) 감소(減少)하고 있었다. 규소함량(硅數含量)은 수잉기(穗孕期)로부터 점차 증가(增加)하고 있어 이들 체내성분(體內成分)의 변화(變化)가 목도열병(病)의 발병(發病)을 조장(助長)하고 있었다. 8. 도열병균(稻熱病菌) 포자(胞子)의 비산(飛散)은 대다수 수직(垂直) 방향(方向)으로 상승(上昇)또는 하강(下降)하여 도체(稻體)에 부간(附看)하였으며 수평(水平)으로 이동(移動)하는 포자(胞子)는 극(極)히 적어 출수후(出穗後)의 이삭목에 부간(附看)하는 포자수(胞子數)가 적으므로 출수후(出穗後) 목도열병(病) 감염율(感染率)은 매우 낮을 것으로 추정(推定)되었다. 도체(稻體) 상하위간(上下位間)의 온도차(溫度差)에 의(依)한 공기(空氣)의 이동(移動)은 포자비산(胞子飛散)에 대(對)한 하나의 원인(原因)이었다. 9. 출온기(出穩期)를 전후(前後)한 포자비산(胞子飛散)이 가장 목도열병발병(病發病)과 상관(相關)이 높았으며 지엽(止葉)을 포함(包含)한 상위(上位) 3개엽(個葉)에 형성(形成)된 병반(病斑)이 출수(出穗)를 전후(前後)한 시기(時期)에 포자형성량(胞子形成量)이 많아 직접(直接) 목도열병(病) 전염원(傳染源)으로서 크게 작용(作用)하고 있었다. 10. 엽초내 환경조건(環境條件)은 목도열병(病) 감염(感染)에 극(極)히 호적(好適)하여 엽초내에서 도열병균(病菌)의 침해(侵害)를 받는 경우 품종(品種)의 내병성(耐病性), 시복수준(施服水準)의 차이(差異)에 관계(關係)없이 이삭목이나 지경(枝梗), 인, 마디, 마디사이 등(等) 도체(稻體)의 어느 부위(部位)라도 감염(感染)이 이루어졌다. 11. 엽초내에 침투(浸透)한 우고균(優古菌) 중에서 벼 갈색엽고병균(病菌)인 Gerlachia oryzae 만이 발병(發病)을 다소(多少) 조장(助長)할 뿐 기타(其他)의 균(菌)들은 영향(影響)이 적었으며 품종(品種)의 출수소요일수(出穗所要日數)의 장단(長短)이 목도열병(病) 감염(感染)과 관련(關連)이 있는 것으로 추정(推定)되었다.

• 시큐리티연구
• /
• 제1호
• /
• pp.371-408
• /
• 1997

This article is the reserch on actual condition of crime of arson which occurs in Korea and its countermeasures. The the presented problem in this article are that (1) we have generally very low rate concern about the crime of arson contrary to realistic problems of rapid increase of crime of arson (2) as such criminal motives became so diverse as to the economic or criminal purpose unlike characteristic and mental deficiency of old days, and to countermeasure these problems effectively it presentation the necessity of systemantic research. Based on analysis of reality of arson, the tendency of this arson in Korea in the ratio of increase is said to be higher than those in violence crime or general fire rate. and further its rate is far more greater than those of the U.S.A. and Japan. Arson is considered to be a method of using fire as crime and in case of presently residence to be the abject, it is a public offense crime which aqccompany fatality in human life. This is the well It now fact to all of us. And further in order to presentation to the crime of arson, strictness of criminal law (criminal law No, 164 and 169, and fire protection law No. 110 and 111) and classification of arsonist as felony are institutionary reinforced to punish with certainty of possibility, Therefore, as tendency of arson has been increased compared to other nations, it is necessary to supplement strategical policy to bring out overall concerns of the seriousness of risk and damage of arson, which have been resulted from the lack of understanding. In characteristics analysis of crime of arson, (1) It is now reveald that, in the past such crime rate appeared far more within the boundary of town or city areas in the past, presently increased rate of arsons in rural areas are far more than in the town or small city areas, thereby showing characteristics of crime of arson extending nation wide. (2) general timetable of arson shows that night more than day time rate, and reveald that is trait behavior in secrecy.(3) arsonists are usually arrested at site or by victim or report of third person(82,9%).Investigation activities or self surrenders rate only 11.2%. The time span of arrest is normally the same day of arson and at times it takes more than one year to arrest. This reveals its necessity to prepare for long period of time for arrest, (4) age rate of arson is in their thirties mostly as compared to homicide, robbery and adultery, and considerable numbers of arsons are in old age of over fifties. It reveals age rate is increased (5) Over half of the arsonists are below the junior high school (6) the rate of convicts by thier records is based on first offenders primarily and secondly more than 4 time convicts. This apparently shows necessity of effective correctional education policy for their social assimilation together with re-investigation of human education at the primary and secondary education system in thier life. The examples of motivation for arosnits, such as personal animosity, fury, monetary swindle, luscious purpose and other aims of destroying of proof, and other social resistance, violence including ways of threatening, beside the motives of individual defects, are diverse and arsonic suicide and specifically suicidal accompany together keenly manifested. When we take this fact with the criminal theory, it really reveals arsons of crime are increasing and its casualities are serious and a point as a way of suicide is the anomie theory of Durkheim and comensurate with the theory of that of Merton, Specifically in the arson of industrial complex, it is revealed that one with revolutionary motive or revolting motive would do the arsonic act. For the policy of prevention of arsons, professional research work in organizational cooperation for preventive activities is conducted in municipal or city wise functions in the name of Parson Taskforces and beside a variety of research institutes in federal government have been operating effectively to countermeasure in many fields of research. Franch and Sweden beside the U.S. set up a overall operation of fire prevention research funtions and have obtained very successful result. Japan also put their research likewise for countermeasure. In this research as a way of preventive fire policy, first, it is necessary to accomodate the legal preventitive activities for fire prevention in judicial side and as an administrative side, (1) precise statistic management of crime of arson (2) establishment of professional research functions or a corporate (3) improvement of system for cooperative structural team for investigation of fires and menpower organization of professional members. Secondly, social mentality in individual prospect, recognition of fires by arson and youth education of such effect, educational program for development and practical promotion. Thirdly, in view of environmental side, the ways of actual performance by programming with the establishment of cooperative advancement in local social function elements with administrative office, habitants, school facilities and newspapers measures (2) establishment of personal protection where weak menpowers are displayed in special fire prevention measures. These measures are presented for prevention of crime of arson. The control of crime and prevention shall be prepared as a means of self defence by the principle of self responsibility Specifically arsonists usually aims at the comparatively weak control of fire prevention is prevalent and it is therefore necessary to prepare individual facilities with their spontaneous management of fire prevention instead of public municipal funtures of local geverment. As Clifford L. Karchmer asserted instead of concerns about who would commit arson, what portion of area would be the target of the arson. It is effective to minister spontaveously the fire prevention measure in his facility with the consideration of characteristics of arson. On the other hand, it is necessary for the concerned personnel of local goverment and groups to distribute to the local society in timely manner for new information about the fire prevention, thus contribute to effective result of fire prevention result. In consideration of these factors, it is inevitable to never let coincide with the phemonemon of arsons in similar or mimic features as recognized that these could prevail just an epedemic as a strong imitational attitude. In processing of policy to encounter these problems, it is necessary to place priority of city policy to enhancement of overall concerns toward the definitive essense of crime of arson.

• 한국초지조사료학회지
• /
• 제40권2호
• /
• pp.98-105
• /
• 2020

본 시험은 도입되는 사일리지용 옥수수의 품종과 식물체 부위에 따른 사료가치와 생산성을 비교하기 위하여 수행하였다. 시험에 이용된 옥수수 품종은 미국 Pioneer Hybrid Co.에서 도입된 8개 품종(P1184, P1151, P1194, P1543, P1345, P1429, P1443 및 P2105)으로 강원도 평창군에 위치한 서울대학교 평창캠퍼스 내에 있는 시험포에서 수행하였다. 수확한 옥수수는 전체 5개 부위(leaf, stem, cob, husk 및 grain)로 분리하여 건조한 후 각 부위별 비율을 산정하였고 사료가치를 분석하였다. 옥수수의 출현율은 P1151 및 P2105품종을 제외하고는 대체로 양호하였다. 출수기는 평균 7월 24일, 출사기는 7월 27일 이었으나 P2105 품종은 7월 28일 및 8월 1일로 늦었고 나머지 품종은 비숫하였다. 초장 및 착수고에 있어서는 P1345 품종이 가장 컸으며(289 및 123 cm), P1151 품종이 가장 작았다(267 및 101 cm). 질병 저항성은 P1184, P1443 및 P1429에서 낮았고 P1197 및 P1345는 높았다. 건물함량은 경엽의 경우 P1151 품종에서 19.6%로 가장 낮았으며 P1429 품종에서 24.9%로 가장 높게 나타났다. 암이삭은 만생 품종인 P2105 품종이 가장 높았고(55.5%) P1184(54.2%) 및 P1345(54.3%) 품종도 유의적으로 높게 나타났다 (p<0.05). P2105, P1429 및 P1194 품종의 경엽 건물수량이 유의적으로 높게 나타났으며 (p<0.05), P2105, P1345 및 P1443 품종의 암이삭 건물 수량이 높았다. 5개의 부위로 분리된 식물체(Leaf, Stem, Husk, Cob 및 Grain)의 각 부위별 비율을 살펴보면 대체적으로 암이삭에 해당하는 grain과 cob 합의 비율이 50~60%로 나타나 비교적 높은 비율을 보였다. 포엽(husk)와 속대(cob)의 비율은 대체적으로 비슷하였으며 잎과 줄기는 약 20% 내외의 비율을 보여주었다. 조단백질 함량은 잎이 가장 높았고 그 다음이 grain이었다. 줄기의 조단백질 함량은 가장 낮았으며 포엽(husk)은 품종간에 유의적인 차이가 없었다(P>0.05). ADF 함량은 곡실을 제외한 나머지 부분은 비슷하였지만 잎 부분이 더 낮은 경향을 나타내었으며 줄기와 잎을 제외한 다른 부위는 품종간에 유의적인 차이를 보이지 않았다(p>0.05). NDF 함량은 husk에서는 유의적인 차이가 없었으나 다른 부위는 품종간에 차이를 보였다(p<0.05). 또한 품종별로 부위에 따라 특별한 차이를 보였는데, 줄기는 P2015, 잎은 P1197, 속대는 P1151 포엽은 P1197 그리고 알곡은 P1197에서 NDF 함량이 높게 나타났다. 건물 소화율은 줄기와 알곡에서 유의적인 차이가 없었으나 잎과 암이삭을 구성하는 포엽과 속대에서는 품종간에 차이가 나타났다. 이상의 결과를 종합하여 볼 때 시험에 P2105 품종의 건물수량이 가장 우수하였으며 알곡의 비율은 P1543 및 P1345에서 우수하였다. 또한 사료가치는 잎과 곡실 부분이 높았으며 잎과 줄기가 husk나 cob보다는 사료가치가 높은 것을 알 수 있었다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• 자원환경지질
• /
• 제5권4호
• /
• pp.187-209
• /
• 1972

발파(發破)에 있어서 천공배치(穿孔配置)는 발파효과에 영향(影響)을 미치는 가장 중요(重要)한 요소중(要素中)의 하나다. Burn-cut 의 폭발(爆發)의 여러 요소(要素)에 관(關)한 연구(硏究)는 Brown, Cook에 의(依)해 발표(發表)된 바 있으나 본연구(本硏究)에 있어서는 Burn-cut 와 Pyramid-cut의 천공배치(穿孔配置)의 대비(對比)와 폭원(爆源)과 자유면(自由面)사이의 역학적(力學的) 응력해석(應力解析)에 중점(重點)을 두어 이등교수(伊藤敎授)가 전개(展開)한 이론(理論)에서 다루지 않은 주정천공배치(週正穿孔配置)에 의(依)한 Burn-cut의 효과을 연결(連結)시켰다. 종래(從來)의 이론(理論)에 의(衣)하면 단일자유면발파(單一自由面發破)에 있어서는 압축응력외(壓縮應力外)에 자유면(自由面)에서 반사(反射)되는 인장응력(引張應力)의 영향(影響)을 추가(追加)로 받는다. 본(本) 신천공(新穿孔) 배치(配置)에 의(依)한 Burn-cut는 자유면수(自由面數)의 증가(增加)와 거리(距離)의 축소(縮少)를 꾀하므로서 이효과(效果)는 더욱 증대(增大)된다. 이와 같은 효과를 위(爲)해서는 다음 두가지 점(點)을 고려해야 한다. 첫째 심기공(心技孔)의 무장약공(無裝藥孔)은 보조응력(補助應力)을 크게 하기위(爲)해 가능(可能)한 대구경(大口徑)으로 깊게 천공(穿孔)해야 한다. 둘째 각 심기공간(心技孔間)의 거리(距離)를 접근(接近)시켜 완전(完全) 발파(發破)를 기(期)해야 한다. 그 까닭은 구경(口徑)이 증가(增加)됨에 따라 2차(次) 자유면(自由面)은 넓어지고 거리가 가까울수록 장약공(裝藥孔)과 무장약공(無裝藥孔)사이의 인장응력(引張應力)은 더욱 발달(發達)되기 때문이다. 선진국(先進國)에서는 심기공(心技孔)사이의 거리(距離)를 4"로 함이 이상적(理想的)이라고 알려지고 있으나 본실험(本實驗)에 의(依)하면 더 욱 근접(近接)될수록 파괴암석(破壞岩石)이 증가(增加)되고 굴진장(掘進長)도 깊어짐이 밝혀졌다. 나아가서는 굴진장(掘進長)을 더욱 증대(增大)시키기 위(爲)해 Burn-cut로 부터 Large hole Burn-cut를 개발(開發)하여 발파회수(發破回數) max 7회(回)/일(日)로서 1발파당(發破當) 3.1m까지 시도(試圖)함으로서 고속도굴진(高速度掘進)의 기원(起源)을 마련했다. 또한 대구경(大口徑) Burn-cut에서는 큰 저항(抵抗)을 극복하기 위해 금속초유폭약(金屬硝油爆藥)을 사용(使用)함이 더욱 효과적(效果的)임이 입증(立證)됐다. 최근(最近)에 와서 저렴(低廉)한 가격(價格)과 취급안전(取扱安全)으르 각광을 받고있는 AN-FO는 비료용 또는 공업용(工業用) 초안(硝安)에 연료유(燃料油)를 혼합(混合)한 것으로서 외관(雷管)만으로는 순감(純感)하여 폭발(爆發)하지 않으나 Gelatin Dynamite등(等)의 폭발성(爆發性) 예감제(銳感劑)에 의(依)해 발파공내(發破孔內)에서 일단 기폭(起爆)되면 종래(從來)의 초안폭약(硝安爆藥)에 상당(相當)한 위력(威力)을 발휘(發揮)케 한다. AN-FO 폭제(爆劑)의 성능(性能)에 관(關)해서는 많은 보고(報告)가 있었으나 본(本) 실험(實驗)에 의(依)하면 초유혼합비(硝油混合比)는 분상(粉狀)은 93.5:6.5, prill상(狀)은 94:6이 최적(最適)이며 분상(粉狀) AN-FO는 prill상(狀) AN-FO보다 항상(恒常) 폭속(爆速)이 높다. 또한 기폭감도(起爆感度), 충격감도(衝擊感度), 진거감도(塵據感度) 등(等) 제감도(諸感度)는 타화약(他火藥)에 비(比)해 몹시 경감(鏡感)하며 전폭성(傳爆性)은 prill상(狀)이 분상(粉狀)보다 우수(優秀)함을 얻었다. 발파후(發破後) Gas도 양호(良好)하며 AN-FO는 제조후(製造後) 7일(日) 전후(前後)가 최대효과를 갖는다. 종래(從來) AN-FO는 지난 여러해 동안 로천굴(露天掘)에만 사용(使用)하여 왔으나 필자(筆者)는 AN-FO의 기초성능시험(基礎性能試驗)을 토대(土臺)로 이를 이용(利用)한 신종폭제(新種爆劑)로서 금속초유폭약(金屬硝油爆藥)과 수중폭약(水中爆藥)을 발전(發展)시켰다. 금속초유(金屬硝油)의 폭약(爆藥)은 AN-FO와 Al 금속분말의 혼합물(混合物)이며 수중폭약(水中爆藥)은 종래폭약(從來爆藥)과 AN-FO로 제조(製造)한 바 이에 관(關)해서는 다른 논문(論文)에 기술(記述)했다. 본(本) 연구(硏究)에 있어서는 단일자유면(單一自由面) 발파(發破)에 있어서 격유폭약류(隔油爆藥類)를 사용(使用)한바 그 효과(效果)가 매우 양호(良好)하였음을 확인(確認)하였다.

• 대한자원환경지질학회:학술대회논문집
• /
• 대한자원환경지질학회 2001년도 제17차 공동학술강연회 및 춘계학술답사
• /
• pp.42-63
• /
• 2001

무령왕릉의 보존대책을 수립하기 위하여 누수 현상, 고분구조 벽체거동 상황 및 구조안전점검, 고분 내에 서식하는 조류의 제거, 고분내 습기 및 결로현상 제거를 위한 공기조화시설 등을 포함하는 종합 정밀저사를 1996년 5월 1일 부터 1997년 4월 30일 까지 1년간 수행하였다. 이러한 연구를 수행하기 위하여 기초 지반에 대한 정밀측량, 고분 내외부의 년중 온습도 모니터링, 지반의 내부물성 파악을 위한 지구물리 탐사, 시추 자료에 대한 각종 물성실험, 지반의 투수계수 측정 및 지구화학적 분석을 실시하였다. 고분 내외부에 대한 정밀측량 결과 봉분 중심의 현실 중심보다 북동쪽으로 5m 이격되어 있다. 무령왕릉의 경우는 발굴 당시에도 유사한 분포를 하였으나, 이로 인하여 불균형적인 토압을 발생시키는 원인이 되고 있다. 벽돌깨짐 상황 조사결과 무령왕릉의 조사 대상 벽돌 6025장중 1972년에는 435장 파손되었던 것이 1996년 조사결과 1072장이 파손된 것으로 밝혀져 파손율이 2.5배로 증가하였다. 6호분의 경우는 이보다 더 심하여 벽돌 파손율이 2.9배로 증가하고 있다. 1972년 상황은 약 1450년간 진행된 것이고 1996년의 상황은 불과 24년간 진행된 것임을 감안할 고분이 발굴된 이후 벽돌의 균열은 상당한 가속도로 진행되어 온것이 사실이며 이대로 진행된다면 더욱 더 가속화될 것으로 판단된다. 고분벽체의 거동상태를 계측한 결과 무령왕릉 동측벽의 경우 우기와 건기에 각각 2.95 mm/myr및 1.52 mm/myr의 거동을 보여 우기에 지하수 유입에 의한 지반의 약화로 인하여 건기보다 2배정도 거동하는 양상을 보인다. 한편, 연도 입구의 호벽은 건기에 전실쪽으로 0.43 mm/myr, 연도쪽으로 2.05 mm/myr의 거동을 보여 무령왕릉에서는 가장 심한 거동을 보이고 있다. 6호분의 거동현황은 건기에만 측정된 바, 현실의 동측벽과 서측벽이 각각 벽체 뒤쪽으로 7.44 mm/myr, 현실안쪽으로 3.61 mm/myr의 거동을 보여 조사대상 5호분, 6호분, 7호분, 중 가장 심한 거동을 보이고 있다. 이는 고분 벽돌의 깨짐이 6호분이 가장 심하다는 사실과 무관하지 않은 것으로 판단된다. 봉분내부의 토양층구조에 대한 지오레이다 영상단면을 분석한 결과 무령왕릉 연도상부의 누수지방지층이 심하게 균열되어 있음을 발견하였다. 이 곳은 고분내부로 직접누수가 발생하는 곳이다. 직접누수와 지하수 형태로 유입된 침투수는 고분군 주위의 지반의 함수비를 증가시켜 지반의 지지력을 약화시키고 또한 고분내로 서서히 유입되어 고분내부의 습도를 100%로 유지시키는 주된 원인이다. 이러한 높은 습도는 고분내의 남조류의 번식을 가져왔으며 남조류의 번식은 현재 6호분이 가장 심각하고 7호분이 우려되는 수준이며 5호분은 문제가 없는 것으로 판단된다. 이와 같이 고분군의 발굴후 인위적인 환경변화와 지속적인 강우침투 및 배수 불량의 영향은 고분군의 안정성에 상당한 위험을 초래하였으며, 현 상태는 각 고분에 대한 보강이 불가피한 것으로 판단된다. 고분 벽돌의 깨짐, 고분 벽체의 거동, 조류의 서식등을 포함하여 송산리 고분군에서 발생되고 있는 보존상의 제반 문제점들을 일차적으로 누수 및 침투수에 의한 결과이다. 그러므로 무엇보다도 고분군 내부 및 고분 주변으로의 강우 및 지하수 침투를 막는 차수 대책이 시급한 것으로 판단된다. 또한 이미 발생한 변위가 더 이상 진행되지 않도록 하중을 경감하고 토압의 균형을 이루는 보강대책이 시급한 실정이다. 고분군의 보존대책으로는 고분의 구조안전에 관하여 근본적인 구조변경이 불가피한 직접 보강대책보다 간접적인 보강대책이 바람직한 것으로 판단된다. 간접적 보강대책으로서는 현 봉분규모의 축소, 불균등토압의 조정, 강우침투 방지를 위한 최종복토시스템, 유도배수구의 설치 및 능선 상부로부터의 지하수 차단시설을 포함한다. 이러한 차수대책은 고분군의 제문제를 해결하는 가장 근본적인 대책이라 할 수 있다. 고분내 결로현상 및 습기 제거를 위하여 항온항습장치를 전실에 설치하고 덕트를 통하여 고분내 현실로 순환시키는 방법을 제안하며 외부 온도의 영향을 덜 받게 하기 위하여 전실상부 토양을 현재보다 두껍게 하고 전실의 천정마감재를 열전도도가 낮은 목재로 교체하며 출입문의 이동등을 제안하였다. 금번 조사 연구를 통하여 얻어진 각종 보수 및 보존대책은 고분구조 자체에 가능한 한 최소의 변화를 주면서 가장 시급한 문제점부터 해결하도록 제시되었다. 설계 및 시공단계에서는 보수의 경중을 가려 순서에 입각하여 이루어져야만 하며 설계 및 시공단계에서 고분의 구조안전에 영향을 주지 않도록 각별한 주의가 요망된다. 끝으로, 상기의 보수대책이 실시된 후 이에 대한 평가 및 향후의 영구 보존을 위한 벽체경사 계측, 함수비 및 지하수위 계측, 온습도 측정 등을 포함하는 사후계측시스템은 필수적이라 할 수 있다. 각종 계측자료를 이용한 장기적이고도 세심한 분석을 통하여 완벽한 보존 관리가 이루어져야할 것으로 사료된다.로 사료된다.

• Applied Biological Chemistry
• /
• 제10권
• /
• pp.69-100
• /
• 1968

1 : 탁주양조(濁酒釀造)에 가장 큰 미생물원(微生物源)이 되는 누룩중(中)의 미생물군(微生物群)과 효소(酵素)를 조사하기 위(爲)하여 충남대학교(忠南大學校) 농과대학(農科大學)에서 제조(製造)한 누룩(S)와 시판(市販) 누룩(T)을 공시(供試)하여 사상균(絲狀菌), 호기성세균(好氣性細菌), 유산균(乳酸菌) 및 효모(酵母)를 검색(檢索) 계수(計數)하고 특(特)히 효모(酵母)는 TTC-agar 처리(處理)로서 그 정색별(呈色別)에 따라 유별(類別)하였으며 또한 Amylase 및 Protease 역가(力價)를 측정(測定)하여 얻은 결과(結果)는 다음과 같다. (a) S 누룩 1gm. 중(中)에는 Aspergilles eryzae group: $240{\times}10^5$, Black aspergilli: $163{\times}10^5$, Rhizopus: $20{\times}10^5$, Penicillia: $134{\times}10^5$, 호기성(好氣性) 세균(細菌): $9{\times}10^6{\sim}2{\times}10^7$, 유산균(乳酸菌): $3{\times}10^4$개(個)이였으며 T 누룩 1gm.중(中)에는 Aspergilles oryzae group: $836{\times}10^5$, Black aspergilli: $268{\times}10^5$, Rhizopus: $623{\times}10^5$, Penicillia: $264{\times}10^5$, 호기성(好氣性) 세균(細菌): $5{\times}10^6{\sim}9{\times}10^6$, 유산균(乳酸菌): $3{\times}10^4$개(個)이였다. (b) S 누룩중(中) 호기성세균(好氣性細菌)은 $80{\sim}90%$가 Bacillus subtilis 계(系)인것 같았으며 T 누룩의 것은 70%내외(內外)가 구균(球菌)이었고 유산균(乳酸菌)은 양(兩)누룩이 다 약(約) 80%가 구상유산균(球狀乳酸菌)이였다. (c) S 누룩 1gm.중(中)의 효모(酵母)는 약(約) $6{\times}10^4$개(個)로서 이 중(中) TTC Pink 효모(酵母)가 56.5%, Red pink 효모(酵母): 16%, Red 효모(酵母): 8%, White 효모(酵母): 19.5%이었으며 T 누룩 1gm.중(中)의 효모(酵母)는 약(約) 개(個)로서 이 중(中) Pink: 42%, Red Pink: 21%, Red: 28%, White: 9%이였다. (d) S 누룩 1gm.중(中)의 효소력(酵素力)은 액화형(液化型) amylase: $D^{40}^{\circ}_{30}^'=32\;W.V.$, 당화형(糖化型) amylase: 43.32 A.U., Acid protease 181 C.F.U., Alkaline pretease: 240 C.F.U.이였으며 T 누룩 1gm.의 효소력(酵素力)은 액화형(液化型) amylase: $D^{40}^{\circ}_{30}^'=32\;W.V.$, 당화형(糖化型) amylase: 34.92 A.U., Acid protease 138 C.F.U., Alkaline pretease: 31 C.F.U.이였다. 2 : S, T 누룩으로서 탁주(濁酒)를 담금하여 전양조(全釀造) 기간중(期間中) 매(每) 12시간(時間)의 미생물군(微生物群) 및 효소력(酵素力)의 소장(消長)을 측정(測定)하고 주효모(主酵母)라고 인정(認定)한 Pink와 Red 효모(酵母)를 분리배양(分離培養)하여 유산첨가(乳酸添加)로 pH를 4.2로 조절(調節)한 S, T 각구(各區)술덧에 $1{\times}10^6ml$개(個)를 첨가(添加) 양조(釀造)한 각(各)술덧중(中)의 미생물군(微生物群)의 소장(消長)을 측정(測定)하여 얻은 결과(結果)는 다음과 같으며 이 실험에서도 효모(酵母)는 TTC 정색별(呈色別)로 유별(類別) 계수(計數)하였다. (a) 각시료구(各試料區)에서 사상균(絲狀菌)은 담금후(後) $2{\sim}3$일경(日頃)부터 검출(檢出)되지 않았으며 호기성(好氣性) 세균(細菌)은 담금 직후(直後) 술덧 매(每) ml 당(當) S 누룩 사용(使用)의 3구(區)에서 $15{\times}10^7{\sim}35{\times}10^7$개(個), T 누룩 사용(使用)의 3 구(區)에서 $8.2{\times}10^7{\sim}12{\times}10^7$개(個)가 검출(檢出)되어 이중(中) 구균(球菌)은 유산(乳酸) 무첨가(無添加)로 담금한 S 및 T구(區)에서는 36시간경(時間頃)까지 많은 증식(增殖)을 하다가 기후(其後) 급속(急速)히 감소(減少)되고 유산(乳酸) 첨가(添加)로 담금한 SP, SR, TP, 및 TR 구(區)에서는 처음부터 거의 검출(檢出)되지 않고 Bacillus는 각구(各區)에서 다 같이 많은 기복(起伏)이 있는 소장(消長)을 하였으나 말기(末期)에는 초기(初期)의 약(約) $1/5{\sim}1/10$ 수(數)로 감소(減少)되었다. (b) 유산균(乳酸菌)은 담금후(後) 24시간경(時間頃)에 S 구(區)에서는 술덧 매(每) ml 당(當) 약(約) $7.4{\times}10^7$ 개(個)가 검출(檢出)되어 $3{\sim}4$일경(日頃)까지 약(約) $2{\times}10^8$ 개(個)로 증식(增殖)하고 그후(後) 급속(急速)히 감소(減少)되어 말경(末頃)에는 약(約) $4{\times}10^5$ 개(個)가 존재(存在)하였으며 T 구(區)에서는 24시간경(時間頃)에 검출(檢出)되었으며 3일경(日頃)에는 약(約) $3{\times}10^7$ 개(個), 말경(末頃)에는 약(約) $2{\times}10^5$ 개(個)가 존재(存在)하였다. 한편 SP, SR, TP, 및 TR 구(區)에서는 각구(各區)마다 24시간경(時間頃)에 약(約) $4{\times}10^5$ 개(個)로 현저(顯著)히 적은 수(數)가 검출(檢出)되었으며 기후(其後) 별(別) 변동(變動)없는 소장(消長)을 하거나 사멸(死滅)되어 거의 검출(檢出)되지 않았다. (c) 각구(各區)술덧에서 검출(檢出)된 유산균(乳酸菌)은 대부분(大部分) 구상균(球狀菌)이였으며 또한 유산균(乳酸菌)의 소장(消長)은 술덧중(中)에 생성(生成)되는 유산(乳酸) 및 Alcohol 함량(含量)과 부합(符合)되는 경향(傾向)이였다. (d) 효모(酵母)는 24시간경(時間頃)부터 증식(增殖)이 뚜렷하여 술덧 매(每) ml당(當) S 구(區)에서는 약(約) $2{\times}10^8$ 개(個)가 되고 48시간경(時間頃)에는 약(約) $4{\times}10^8$ 개(個)가 되어 계속(繼續)하다가 후기(後期)에 다시 증가(增加)되어 $5{\sim}7{\times}10^8$ 개(個)가 되었으며 T 구(區)에서는 24시간경(時間頃)에 $4{\times}10^8$ 개(個)가 되었고 기후(其後) 기복(起伏)을 보이면서 $2{\sim}5{\times}10^8$ 개(個)로 계속(繼續)하였다. (e) S, T 양구(兩區)술덧중(中)에서 소장(消長)한 효모(酵母)는 TTC Pink 효모(酵母)가 90%이상(以上)을 차지하고 Red pink 및 Red 효모(酵母)는 전양조기간(全釀造期間)을 통(通)하여 $2{\times}10^6{\sim}3{\times}10^7$ 개(個) 사이에서 소장(消長)하였다. (f) SP 에서는 효모(酵母)는 24시간경(時間頃)에 S 구(區)보다 2배(倍)가 되는 약(約) $5{\times}10^8$ 개(個)의 Pink 효모(酵母)가 검출(檢出)되었으며 중기말경(中期末頃)까지는 S 구(區)보다 많은 수(數)이였으나 후기(後期)에는 별차(別差)없는 수(數)가 되었다. (g) SR 구(區)에서 소장(消長)하는 총효모수(總酵母數)는 SP 구(區)와 대차(大差)는 없었으나, 첨가(添加)해준 Red 효모(酵母)는 초기(初期)에 다소(多少) 많이 검출(檢出)되고 3일후(日後)부터는 S 구(區)와 별차(別差)없는 수(數)로 소장(消長)하였으며 TR구(區)에서도 Red 효모(酵母)가 초기(初期)에는 T 구(區)에 비(比)해서 많았으나 중기이후(中期以後)부터는 T 구(區)와 별차(別差)없는 경향(傾向)이어서 Red 효모(酵母)를 가(加)한 구(區)에서도 Pink 효모(酵母)가 훨씬 우세(優勢)함을 보여 본실험(本實驗)에서 검출(檢出)된 Red 효모(酵母)는 탁주양조(濁酒釀造)에서 후기(後期)까지 계속(繼續) 생육(生育)은 하나 많은 증식(增殖)은 하지 않았다. (h) TP 구(區)에서 Pink 효모(酵母)는 2일경(日頃)에 약(約) $5{\times}10^8$ 개(個)가 되어 T 구(區)에 비(比)해서 많고 기후(其後) 감소(減少)되는 경향(傾向)이나 T 구(區)보다는 많으며 후기(後期)에서는 역시(亦是) T 구(區)와 별차(別差)없는 수(數)가 되었다. (i) 술덧중(中)의 효모(酵母) 소장(消長)과 동시(同時)에 Alcohol 생성량(生成量)을 측정(測定)한 결과(結果) Pink 효모(酵母)를 첨가(添加)한 구(區)에서 초기(初期)에 다소(多少) 많은 생성량(生成量)을 보였으나 중기(中期) 이후(以後)는 효모(酵母) 무첨가구(無添加區)와의 차이(差異)를 인정(認定)할 수 없었고 또 Alcohol생성(生成)은 효모(酵母) 총수(總數)와 비례(比例)하지 않았다. (j) 액화형(液化型) Amylase는 담금 후(後) 12시간경(時間頃)까지 가장 강(强)하고 24시간경(時間頃)에 일단(一旦) 감소(減少)되었다가 시간경(時間頃)에 최고(最高)로 증가(增加)된 후(後) 74시간경(時間頃)까지 서서(徐徐)히 감소(減少)되고 기후(其後)는 급(急)히 감소(減少)를 보였다. (k) 술덧발효중(醱酵中) Alkaline protease는 불규칙적(不規則的)이기는 하나 계속(繼續) 감소(減少)되는 소장(消長)이었고 Acid protease는 24시간경(時間頃)에 최고(最高)로 증가(增加)하였다가 급(急)히 감소(減少)된 후(後) 다시 증가(增加)하는 불규칙적(不規則的)인 소장(消長)을 보였으나 Alkaline protease 보다는 계속(繼續) 강(强)하였었다. 3 : 본실험(本實驗)에서 가장 많이 검출(檢出)된 TTC Pink 효모(酵母)와 계속(繼續) 나타난 2주(株)의 Red Pink 효모(酵母) 및 1주(株)의 를 동정(同定)하고 이들의 생리적성질(生理的性質)을 검사(檢査)한 결과(結果)는 다음과 같다. (a) TTC Pink 효모(酵母)(B-50P)와 2주(株)의 Red Pink 효모(酵母)(B-54RP 및 B-60RP)는 Saccharomyces cerevisiae 형(型)이였고 Red 효모(酵母)(B-53P)는 Hansenula subpelliculosa 형(型)이였다. (b) 분리동정(分離同定)한 발효력(醱酵力)을 측정(測定)한 결과(結果) 2주(株)의 TTC Red Pink 효모(酵母)가 가장 강(强)하고 Pink 효모(酵母)가 다소(多少) 떨어지며 Red효모(酵母)는 현저(顯著)히 약(弱)함을 보였고 특(特)히 Pink 및 2주(株)의 Red Pink 효모(酵母)는 초발효력(初醱酵力)이 강(强)하여 탁주양조(濁酒釀造)에 적합(適合)함을 알았으며 Red효모(酵母)는 발효력(醱酵力)은 약(弱)하나 Ester생성력(生成力)이 강(强)하여 탁주양조(濁酒釀造)에 중요(重要)한 역할(役割)를 하는것을 알았다. 따라 탁주양조(濁酒釀造)에는 TTC Red Pink 및 Pink로 정색(呈色)되는 Saccharomyces cerevisiae 형(型)이 우량(優良)함을 추정(推定) 할 수 있었다. (c) 분리동정(分離同定)한 4주(株)효모(酵母) 아초산내성(亞硝酸耐性)은 강(强)하였으며 유산내성(乳酸耐性)은 국즙(麴汁) 배지(培地)에서 3%정도(程度)이었으나 Red효모(酵母)는 더 강(强)하였고 Alcohol 내성(耐性)은 Hayduck배지(培地)에서 Pink 및 Red Pink 효모(酵母)는 3%정도(程度)이고 맥아즙(麥芽汁) 배지(培地)에서는 13%정도(程度)이었으나 Red 효모(酵母)는 이들보다 훨씬 약(弱)하였으며 Gelatin 액화(液化)는 2주(株)가 다 40일(日)까지 (-)이였다. 4 : 탁주양조중(濁酒釀造中)의 발효도(醱酵度)는 2일경(日頃)에 총발효율(總醱酵率)의 $70{\sim}80%$가 이루어지고 $3{\sim}4$일경(日頃)까지 90%내외(內外)가 진행(進行)되어 주발효(主醱酵)는 이 시기(時期)에 종료(終了)됨을 보였으며 또한 탁주양조(濁酒釀造)에 있어서 담금한 총전분량(總澱粉量)에 대(對)한 주정(酒精) 발효율(醱酵率)은 65%내외(內外)가 됨을 알 수 있었다. 5 : 제등(齊藤)가 탁주(濁酒)술덧에서 분리(分離)한 Saccharomyces coreanus가 본실험(本實驗)에서 전연(全然) 검출(檢出)되지 않은 이유(理由)는 1930년경(年頃)부터 누룩제조(製造)에 국균(麴菌)을 종균(種菌)으로 접종(接種)하였으며 또한 탁주양조(濁酒釀造)에 일본국(日本麴)도 혼합사용(混合使用)하여서 탁주양조(濁酒釀造)에 있어서 미생물상(微生物相)이 완전(完全)히 달라진 탓이 아닌가 생각되며 이것을 뒷받침 하는 것으로 과거의 약탁주(藥濁酒) 고유미(固有味)가 달라진 것을 들 수 있다.