• 태양에너지
• /
• 제11권1호
• /
• pp.27-40
• /
• 1991

에너지 소비 구조의 개선을 목적으로 한 자연에너지 이용시스템의 도입이 전력 계통의 계획 운용에 미치는 영향을 다목적 최적화 방법을 이용하여 평가하는 방법이 논하여 지고 있다. 본 연구에서는 시험 제작한 태양열과 풍력 에너지를 주체로하는 자연에너지 복합 이용시스템이 특정 지역에 복수 도입되어 지는 경우 전력 통계 운용에 의한 경제성, 안정성, 환경에 대한 영향 평가 방법을 검토하였다. 연구 방법은 대상 지역의 일사 분포와 풍속 분포에 의해서 취득 가능한 에너지를 산정하여 전력 계통 부하의 형상에 미치는 영향을 구하였고, 다음에는 대상 기간에 의한 최적 발전 배분을 결정하여 경제성, 안정성, 환경 지표 등의 평가를 하였다. 지금까지는 자연에너지 이용시스템의 도입에 대하여 경제적 측면만 논의되었지만, 본 연구에서 제한된 방법에 의해 안정성과 환경 보전의 영향을 고려한 평가 방법도 가능하다는 것을 나타내었다.

• 한국컴퓨터정보학회논문지
• /
• 제17권2호
• /
• pp.13-21
• /
• 2012

모바일 데이터 캐슁 기법은 로컬 데이터 전송 과정에서 속도를 향상시키거나 서버의 오버로드를 줄이기 위한 효과적인 기법으로 많이 사용되었고 모바일 컴퓨팅 환경의 저전력, 접속지연 및 간헐적인 인터넷 연결 등의 제약 사항의 해결을 위해 캐싱 기법을 사용하는 다수의연구가 진행되었다. 그러나 최근 스마트폰이 대량 보급되면서 서버 기반 어플리케이션 등 다양한 어플리케이션들에서 모바일 데이터베이스에서 전송해야 되는 데이터 량이 급증하는 등 문제가 발생하고 있으며, 이런 환경에서는 기존 기법들의 사용이 적합하지 않아 어플리케이션의 서버 대기 시간이 길어지는 등 서비스 품질 저하로 연결된다. 본 논문에서는 데이터 캐쉬의 사용률을 높이고 통신횟수를 줄이고 무선 통신망에서의 데이터 전송량을 줄이고 모바일 데이터베이스 시스템의 성능을 향상시키기 위하여 수요에 따른 교체 우선순위기반모바일동기화정책을제안한다. 또한성능평가를통하여제안기법이데이터전송량을줄이고데이터 전송 성공 확률을 향상시켜 모바일 클라이언트가 대량의 데이터의 전송을 요청할 때 데이터 전송 효율이 향상됨을 보인다.

• Journal of Periodontal and Implant Science
• /
• 제51권5호
• /
• pp.316-328
• /
• 2021

Purpose: This study aimed to examine the prevalence and abundance of 9 representative periodontal pathogens in the saliva samples of periodontally healthy subjects (PH) and patients with periodontitis who underwent supportive periodontal therapy (SPT). The age-specific distribution of these pathogens in periodontally healthy individuals was also analyzed. Methods: One hundred subjects (aged >35 years) were recruited (50 each in the PH and SPT groups) between August 2016 and April 2019. The prevalence and abundance of periodontal pathogens in the PH group were compared with those in periodontally healthy young subjects (94 subjects; aged <35 years), who were included in our previous study. DNA copy numbers of Aggregatibacter actinomycetemcomitans (Aa), Porphyromonas gingivalis (Pg), Tannerella forsythia (Tf), Treponema denticola (Td), Prevotella intermedia (Pi), Fusobacterium nucleatum (Fn), Campylobacter rectus (Cr), Peptostreptococcus anaerobius (Pa), and Eikenella corrodens (Ec) were analyzed using real-time polymerase chain reaction. Results: The detection frequencies of all pathogens, except Aa, were high in the PH and SPT groups. The ranking order of pathogen DNA copy numbers was similar in both groups. In both groups, Fn had the highest abundance, Aa had the lowest abundance. Additionally, Td was significantly more abundant in men than in women in both groups (P<0.05). Compared with the PH group, the SPT group exhibited significantly lower total bacteria and Fn abundance and higher Pg abundance (P<0.05). The age-specific pathogen distribution analysis revealed a significantly low Aa abundance and high Tf and Cr abundance in the PH group. Conclusions: The clinical parameters and microbial profiles were similar between the SPT and PH groups. However, patients with periodontitis require supportive care to prevent recurrence. As the abundance of some bacteria varied with age, future studies must elucidate the correlation between age-related physiological changes and periodontal bacterial composition.

• Nuclear Engineering and Technology
• /
• 제52권12호
• /
• pp.2949-2957
• /
• 2020

Fatigue crack growth model has been developed for dissimilar metal weld joints of a piping component under cyclic loading, where in the crack is located at the center of the weld in the circumferential direction. The fracture parameter, Stress Intensity Factor (SIF) has been computed by using principle of superposition as K_H + K_M. K_H is evaluated by assuming that, the complete specimen is made of the material containing the notch location. In second stage, the stress field ahead of the crack tip, accounting for the strength mismatch, the applied load and geometry has been characterized to evaluate SIF (K_M). For each incremental crack depth, stress field ahead of the crack tip has been quantified by using J-integral (elastic), mismatch ratio, plastic interaction factor and stress parallel to the crack surface. The associated constants for evaluation of K_M have been computed by using the quantified stress field with respect to the distance from the crack tip. Net SIF (K_H + K_M) computed, has been used for the crack growth analysis and remaining life prediction by Paris crack growth model. To validate the model, SIF and remaining life has been predicted for a pipe made up of (i) SA312 Type 304LN austenitic stainless steel and SA508 Gr. 3 Cl. 1. Low alloy carbon steel (ii) welded SA312 Type 304LN austenitic stainless-steel pipe. From the studies, it is observed that the model could predict the remaining life of DMWJ piping components with a maximum difference of 15% compared to experimental observations.

• 한국가스학회지
• /
• 제23권2호
• /
• pp.68-73
• /
• 2019

본 연구에서는 차대동력계 시험에서 수집한 자동차 배출가스자료를 엔진동력계에서 측정되는 동력계 단위로 변환하는 방법을 제안하였다. 엔진동력계 시험은 소요시간이 길고 비용이 높아 적용이 제한적일 경우 간편한 방법인 차대동력계 시험이 선호될 수 있다. 환산 방법은 거리기준 배출가스 자료에 모드 엔진효율을 고려하여 동력단위로 환산하는 방법이며 CO2 성분에 대해서 적용한 결과 환산 결과와 측정 결과 사이에 우수한 상관성을 확인하였다. 이 방법을 해외자료에 적용할 경우 CO2 배출성능에 대해 0.1% 이내로 일치함을 보였으나 CO, NOx 및 THC 와 같은 미량 배출성분 들은 같은 환산방법을 적용하기에는 상관성이 다소 떨어지며 추가적인 고려가 필요함을 보였다.

• 한국해양공학회지
• /
• 제32권6호
• /
• pp.502-510
• /
• 2018

In order to accumulate data to lower the friction coefficient of a press mold, tribological tests were performed before and after coating SM45C with a PVC/PO film and plasma coating (CrN, concept). The ultrasonic nanocrystal surface modification (UNSM)-treated material had a nano-size surface texture, high surface hardness, and large and deep compressive residual stress formation. Even when the load was doubled, the small amount of abrasion, small weight of the abrasion, and width and depth of the abrasion did not increase as much as those of untreated materials. A comparison of the weight change before and after the tribological test with the CrN and the concept coating material and that of the untreated material showed that the wear loss of the concept coating material and P-UNSM treated material (that is, the UNSM treated material treated with the concept coating) showed a tendency to decrease by approximately 55-75%. Concept 100N had a lower friction coefficient of about 0.6, and P-UNSM-30-100N showed almost the same curve as concept 100N and had a low coefficient of friction of about 0.6. The concept multilayer coating had a thickness of $5.32{\mu}m$. In the beginning, the coefficient of friction decreased because of the plasma coating, but it started to increase from about 250-300 s. After about 350 s, the coefficient of friction tended to approach the friction coefficient of the SM45C base metal. The SGV-280F film-attached test specimen was slightly pushed back and forth, but the SM45C base material was not exposed due to abrasion. The friction coefficient was 0.22, which was the lowest, and the tribological property was the best in this study.

• Structural Engineering and Mechanics
• /
• 제69권1호
• /
• pp.11-20
• /
• 2019

The biaxial failure mechanism of transversally bedding concrete layers was numerically simulated using a sophisticated two-dimensional discrete element method (DEM) implemented in the particle flow code (PFC2D). This numerical modelling code was first calibrated by uniaxial compression and Brazilian testing results to ensure the conformity of the simulated numerical model's response. Secondly, 21 rectangular models with dimension of $54mm{\times}108mm$ were built. Each model contains two transversely bedding layers. The first bedding layer has low mechanical properties, less than mechanical properties of intact material, and second bedding layer has high mechanical properties, more than mechanical properties of intact material. The angle of first bedding layer, with weak mechanical properties, related to loading direction was $0^{\circ}$, $15^{\circ}$, $30^{\circ}$, $45^{\circ}$, $60^{\circ}$, $75^{\circ}$ and $90^{\circ}$ while the angle of second layer, with high mechanical properties, related to loading direction was $90^{\circ}$, $105^{\circ}$, $120^{\circ}$, $135^{\circ}$, $150^{\circ}$, $160^{\circ}$ and $180^{\circ}$. Is to be note that the angle between bedding layer was $90^{\circ}$ in all bedding configurations. Also, three different pairs of the thickness were chosen in models, i.e., 5 mm/10 mm, 10 mm/10 mm and 20 mm/10 mm. The result shows that in all configurations, shear cracks develop between the weaker bedding layers. Shear cracks angel related to normal load change from $0^{\circ}$ to $90^{\circ}$ with increment of $15^{\circ}$. Numbers of shear cracks are constant by increasing the bedding thickness. It's to be noted that in some configuration, tensile cracks develop through the intact area of material model. There is not any failure in direction of bedding plane interface with higher strength.

• 수산경영론집
• /
• 제49권4호
• /
• pp.99-108
• /
• 2018

Maintaining a certain level of fisheries production is due to the increase in aquaculture production. In recent years, aquaculture plays an important role in fishery production in Korea. Nevertheless, aquaculture should be carefully managed by regulations because it also causes environmental load which can threat sustainability of aquaculture. For this reason, Korean government has regulated density of culturing facilities with the Fisheries Law and its adjective decrees. The regulatory compliance of fisheries businesses is very low because the criteria for the regulation of the density were not enacted with scientific research. Thus, this research was aimed to obtain scientific criteria for the regulation of oyster aquaculture in Jaran Bay with economic assessment. For this research, we collected the data necessary for the assessment on five investigation points in the bay for two years. With the data, simulation for the growth rate of oyster was performed and the result showed that at least 25.5% of facilities should be reduced. Also, it was revealed that removing 2 long lines would be most beneficial. The NPV of the best measurement was 35,120,300 won and IRR was 11.7%. With this research, the government will gain more accurate regulatory compliance due to the scientific approach. Moreover, fisheries businesses in oyster aquaculture can obtain flexibility to cope with market fluctuation.

• Journal of the Korean Wood Science and Technology
• /
• 제47권5호
• /
• pp.547-556
• /
• 2019

Thinned, small larch logs have small diameters and no value-added final use, except as wood chips, pallets, or fuel wood, which are products with very low economic value; however, their mechanical strength is suitable for structural applications. In this study, small larch logs were sawed, dried, and cut into square timbers (with a $90mm{\times}90mm$ cross section) that were laterally glued to form core panels used to manufacture cross-laminated timber (CLT) wall panels. The surface and back of these core panels were covered with 12-mm-thick structural plywood panels, used as cross bands to obtain three-ply CLT wall panels. This attachment procedure was conducted in two different ways: gluing and pressing (CGCLT) or gluing and nailing (NGCLT). The size of the as-manufactured CLT panels was $1,220mm{\times}2,440mm$, the same as that of the plywood panels. The final wall panels were tested under lateral shear force in accordance with KS F 2154. As the lateral load resistance test required $2,440mm{\times}2,440mm$ specimens, two CLT wall panels had to be attached in parallel. In addition, the final CLT panels had tongued and grooved edges to allow parallel joints between adjacent pieces. For comparison, conventional light-frame timber shear walls and midply wall systems were also tested under the same conditions. Shear walls with edge nail spacing of 150 mm and 100 mm, the midply wall system, and the fabricated CGCLT and NGCLT wall panels exhibited maximum lateral resistances of 6.1 kN/m (100%), 9.7 kN/m (158%), 16.9 kN/m (274%), 29.6 kN/m (482%), and 35.8 kN/m (582%), respectively.

• 한국융합학회논문지
• /
• 제10권10호
• /
• pp.117-122
• /
• 2019

슬로싱 현상은 현상의 특성인 격렬한 자유표면을 가지는 유동 문제뿐만 아니라, 슬로싱이 발생하는 유체 탱크가 부유체 혹은 어떠한 물체에 탑재되어 전체 시스템에 영향을 줄 수 있다는 것이 가장 큰 논의점이다. 이러한 이유로 일반적인 슬로싱에 대한 해석은 탱크의 움직임에 의한 내부 유동의 발생, 그리고 그로 인해 야기되는 충격하중의 해석이 주를 이룬다. 이러한 슬로싱 현상은 비선형성이 강하며 자유표면에서의 대-변형이 발생한다. 매우 높은 비선형성으로 인해 실험에서는 재현성이 낮고, 수치 시뮬레이션에서는 정확도가 낮다는 것이 지속적으로 문제시 되어 왔다. 본 연구에서는 높은 정확도를 가지는 카메라 비전 기술을 이용한 실험과 입자법을 이용한 시뮬레이션을 비교하였다. 탱크의 주요 제원을 통해 구해진 고유 주기와 그 주변 주기를 가지는 운동에서의 슬로싱 현상을 수치적으로 시뮬레이션 하였으며, 비교를 통해 탱크 내 슬로싱 하중을 분석하였다.