• Current Optics and Photonics
• /
• v.8 no.5
• /
• pp.441-455
• /
• 2024

This study objective was to evaluate the effects and mechanisms of low-level laser therapy in H₂O₂-induced cell death in mouse macrophage RAW264.7 cell. After irradiation with 630 and 850 nm wavelength diode lasers with an intensity of 10 mW/cm² in RAW264.7 cells treated with 0.7 Mm H₂O₂, the effects and mechanisms of the two wavelengths on cell death inhibition were evaluated using MTT assay, ROS staining, TUNEL assay, flow cytometry analysis, and Western blot analysis. As a result, 630 or 850 nm light-emitting diodes (LED) were irradiated for 10 or 40 minutes to increase cell viability with H₂O₂ by about 1.7- or 1.6-fold, respectively. In addition, irradiation with two LEDs showed significant ROS scavenging effects, and TUNEL-positive cells were significantly reduced by 45.7% (630 nm) and 37.8% (850 nm) compared to cells treated with H₂O₂ alone. The Bax/Bcl-2 ratio of cells irradiated with both LEDs was significantly lower than that of cells treated with H₂O₂ only, and the expression of procaspase-3 and cleaved PARP was also significantly expressed in the direction of suppressing cell death. In conclusion, ROS scavenging activity by both LEDs irradiation leads to the expression of cell death pathway proteins in the direction of inhibiting cell death.

• Journal of Biosystems Engineering
• /
• v.39 no.2
• /
• pp.134-141
• /
• 2014

Purposes: This study was to validate the Robotic Smart Work System that can provides better working conditions and high productivity in unstructured environments like bio-industry, based on a tele-operation system for fruit harvesting with low cost 3-D positioning system on the laboratory level. Methods: For the Robotic Smart Work System for fruit harvesting and cultivation management in agriculture, a vision based tele-operating system and 3-D position information are key elements. This study proposed Robotic Smart Farming, an agricultural version of Robotic Smart Work System, and validated a 3-D position information system with a low cost omni camera and a laser marker system in the lab environment in order to get a vision based tele-operating system and 3-D position information. Results: The tasks like harvesting of the fixed target and cultivation management were accomplished even if there was a short time delay (30 ms ~ 100 ms). Although automatic conveyor works requiring accurate timing and positioning yield high productivity, the tele-operation with user's intuition will be more efficient in unstructured environments which require target selection and judgment. Conclusions: This system increased work efficiency and stability by considering ancillary intelligence as well as user's experience and knowhow. In addition, senior and female workers will operate the system easily because it can reduce labor and minimized user fatigue.

• Annals of Rehabilitation Medicine
• /
• v.42 no.6
• /
• pp.846-853
• /
• 2018

Objective To compare the effects of low intensity ultrasound (LIUS), traditional exercise therapy (TET), low level laser therapy (LLLT) and TET on temporomandibular joint (TMJ) pain and trismus following recovery from head and neck cancer (HNC). Methods Sixty participants following, who had experienced HNC, were randomly allocated to three groups of 20 people each. Each group received different therapy. Group A received LIUS and TET; group B received LLLT and TET; while group C received TET. All 60 participants were evaluated under the visual analog scale (VAS), the University of Washington Quality of Life questionnaire (UW-QOL) and the Vernier caliper scale (VCS) at the beginning of the therapies and after 4 weeks. Results ANOVA test revealed significant improvements across all three groups with outcomes of p<0.05. The results of the UW-QOL questionnaire showed a significant difference between groups A, B and C in favor of group A (p<0.05). The VAS results showed a more improvement in group A as compared to group B (p<0.05), while there was no statistical difference between groups B and C (p>0.05). The VCS results showed more improvement for the individuals in group B as compared to those in group C (p<0.05), while there was minimal difference between groups A and B (p>0.05). Conclusion The LIUS and TET are more effective than LLLT and/or TET in reducing TMJ pain and trismus following HNC.

• Journal of Oral Medicine and Pain
• /
• v.35 no.1
• /
• pp.31-39
• /
• 2010

This study is to observe the bacteriocidal effect of the Low Level Laser (LLL) against oral microorganisms which are related to the occurrence of periodontal diseases and oral malodors. The Porphyromonas gingivalis 2561 (P. gingivalis 2561) and Prevotella intermedia (Pr. intermedia) were treated with photosensitizing substance-toluidine blue O (TBO; C.I. 52040) and then radiated with the LLL which has 650nm wavelength for 1, 2, 3 and 5mins. continuously upon varying distances of 1, 2 and 3cm for each experimental groups. The results are as follows; 1. The P. gingivalis 2561 which was treated with TBO and then radiated with LLL at a distance of 3cm for 1min. showed 99.99% higher antibacterial effect in comparison to the experimental group treated only with TBO. 2. The Pr. intermedia which was treated with TBO and then radiated with LLL at a distance of 3cm for 1min. showed 99.8% higher antibacterial effect in comparison to the experimental group treated only with TBO. 3. The bacteriocidal effect of the P. gingivalis 2561 treated with TBO was found to gradually increase as the radiation time of LLL extended from 1min. to 3min. at 1min. intervals. 4. A slight decrease in bacteriocidal effect of the P. gingivalis 2561 was found as the radiation distance of LLL increased from 1cm to 3cm at 1cm intervals. 5. The bacteriocidal effect of the Pr. intermedia was found to slightly decrease as the radiation distance of LLL increased from 1cm to 3cm at 1cm. intervals. As the results shown above suggest, the bacteriocidal effect of LLL was found to increase as the radiation time extended and the distance shortened. Moreover, even the experimental group radiated with LLL at 3cm distance for 1min. which showed the lowest level of bacteriocidal effect, was found to have 99.8% higher bacteriocidal effect than the experimental group which was treated only with TBO and, therefore, this clearly shows the bacteriocidal effect of LLL against oral microorganisms. Thus, the use of LLL is thought to become very useful for suportive treatment for periodontitis and implantitis, and controlling oral malodors as long as it is used within the limits where there is no side effect.

• Particle and aerosol research
• /
• v.16 no.2
• /
• pp.49-59
• /
• 2020

Various devices have been developed to the measurement of particulate matter pollutants, and Optical Particle Counter (OPC) that can be easily and quickly measured is widely used lately. The measured value by OPC is converted to weight concentration using the correction factor (CF). The calculation of CF is very important to improve the reliability and accuracy of OPC. In this study, the CF calculation study of light scattering laser photometer (model 8533, TSI) was carried out to measure in the atmospheric environment using 2 gravimetric devices and 3 light scattering laser photometer devices. Regression analysis and Tukey tests were used to significance the test of measurement devices. Measurements were carried out twice. There was a comparative analysis of measurement data between light scattering laser photometer and gravimetric devices in 1st measurement, and then the Evaluation of PM2.5 concentration corrected by CF performed in 2nd measurement. As a result of the significance analysis between light scattering laser photometer and gravimetric devices, the correlation between the same method was high, but the correlation between different methods was low. CF was calculated as 0.4258 based on the measurement results, and it is a similar level to previous studies at home and abroad. It is expected that these results can be used as basic data in the future study for air quality measurement research using light scattering laser photometer. Also, in order to improve the accuracy of the measurement techniques and the development of technology in the atmospheric environment, CF calculation research should be conducted continuously.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.240-240
• /
• 2009

We developed the low level laser therapy(LLLT) apparatus for external injury cure using a GaAsP Diode. This equipment was fabricated by using GaAsP diode and a microcontroller, and designed to enable us to control light irradiation timer, and frequency. In this paper, the designed device was used to find out how GaAsP diode light source affects the skin wound of RAT. In the experiment, $1cm^2$ wounds on the External injury of RAT were made. Light irradiation RAT and none light irradiation RAT divided, each RAT was irradiated 20 min a day for 9 days. In result, compared with none light irradiation RAT, the lower incidence of inflammation and faster recovery was shown in light irradiation RAT.

• Journal of Oral Medicine and Pain
• /
• v.42 no.3
• /
• pp.53-61
• /
• 2017

Myogenous temporomandibular disorder is a collective term for pathologic conditions of the masticatory muscles, mainly characterized by pain and dysfunction associated with various pathophysiological processes. Among the subtypes of myogenous temporomandibular disorder, myofascial pain is one of the most common muscle disorders, characterized by the presence of trigger points (TrPs). Various modalities, such as ultrasound, manipulative therapy, spray-and-stretch technique, transcutaneous electrical nerve stimulation, injection/dry needling, and low-level laser therapy are used to inactivate TrPs. Needling/injection on the TrPs is one of the most common treatments for myofascial pain. Despite the evidence, there is continued controversy over defining the biological and clinical characteristics of TrPs and the efficacy of injection/dry needling. This review discusses the current concept of injection/needling to relieve TrPs.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.732-736
• /
• 2002

The introduction of newly developed intelligent and user-friendly robotics has opened a new era in shipbuilding. Together with traditional and low-cost mechanization a record level of welding automation rate has been achieved in the construction of cruise vessels. In the paper modem applications and recent developments of welding automation and robotics in shipbuilding have been described and some forecast for the future trends are given. Development in the field of shipyards will be continued with accelerated speed and we shall have interesting prospects for the near future. New laser techniques can boost the shipyards in a revolutional way when production is rapidly changing, materials will be lighter and quality demands are becoming more strict.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.961-966
• /
• 2001

Micro fans of randomly swept-blades were designed to provide C.P.U. in a personal computer with effective cooling in a very quiet mode. The proto--type axial micro-fans machined by a laser sintering machine were tested against manufactured products by comparing the performance and overall sound pressure level with spectral measurements in an environment suggested by ASHRAE and ANSI standards. The predicted OSPLs and directivity patterns of fans by iDesignFan software were in good agreements with measured data. The newly introduced fans of randomly swept-blades were proved to provide a very promising mode of low noise at small loading conditions.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1303-1310
• /
• 2000

GPS carrier phase is supposed to provide the tool for the most precise 3 dimensional positioning information. The FAST, an OTF technique, has been developed by the GPS System Laboratory of Konkuk University, and has been shown several millimeter level accuracy in root-mean-square sense. This OTF's high precision positioning capability provides an adequate tool of low frequency vibration monitoring of large structures. In this paper, the possibility of vibration measurement of a cantilever beam using FAST has been tested, which is supposed to be extended to more practical applications. The results of the experiment have been compared with those by a strain gage and laser sensor.