• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권3호
• /
• pp.262-276
• /
• 2016

Generally, the Safety Integrity Level (SIL) of a subsea Blowout Preventer (BOP) is evaluated by determining the Probability of Failure on Demand (PFD), a low demand mode evaluation indicator. However, some SIL results are above the PFD's effective area despite the subsea BOP's demand rate being within the PFD's effective range. Determining a Hazardous Event Frequency (HEF) that can cover all demand rates could be useful when establishing the effective BOP SIL. This study focused on subsea BOP functions that follow guideline 070 of the Norwegian Oil and Gas. Events that control subsea well kicks are defined. The HEF of each BOP function is analyzed and compared with the PFD by investigating the frequency for each event and the demand rate for the components. In addition, risk control options related to PFD and HEF improvements are compared, and the effectiveness of HEF as a SIL verification for subsea BOP is assessed.

• Korean Chemical Engineering Research
• /
• 제50권4호
• /
• pp.672-677
• /
• 2012

Chlorella sp. KR-1 바이오매스에 대한 열분해를 통하여 세포 내 지질을 회수하였다. 중성지질 함량이 10.8%와 36.5%인 두 종류의 KR-1 샘플에 대하여 $600^{\circ}C$에서 열분해를 수행함으로써 지질 함량이 열분해 오일 수율 및 품질 등 반응 특성에 미치는 영향을 살펴보았다. 열분해 결과, 중성지질 함량이 높아 C/H 비가 낮은 샘플이 열분해 전환율 및 오일 수율이 높았다. 저분자량의 유기산, 케톤, 알데히드, 알콜은 두 시료의 열분해에서 모두 발생하였으나 중성지질 함량이 높은 미세조류의 경우 palmitic acid와 oleic acid를 비롯한 유리 지방산의 함량이 높은 대신 질소 함유 유기화합물의 함량은 상대적으로 적었다. 미세조류 열분해 오일은 두 개의 층으로 분리되는데 상부의 경질 분획은 지질 분해에 의하여, 하부의 중질 분획은 당류나 단백질의 분해에 의하여 생성된 것으로 판단되었다. 상부의 경질 분획에는 중성지질의 분해 산물인 유리지방산 이외에 직쇄형 알칸도 상당 부분 포함되어 있었으며 이는 미세조류 열분해시 열분해와 함께 탈카르복실 반응을 비롯한 탈산소 반응이 동시에 일어났기 때문이다. GC 분석을 통하여 생성된 열분해 오일의 품질을 조사하고 지질 추출 방법으로서의 열분해 공정을 평가하였다. 중성지질 함량이 36.5%인 KR-1 샘플의 경우 열분해 수율이 56.9%이며 이 중 경질분획은 68.2%로서 경질분획 만의 수율은 38.8%였다. 또한, 경질분획의 80% 이상이 유리지방산과 순수 탄화수소로 구성되어있어 열분해를 통하여 대부분의 지질을 회수할 수 있음을 확인하였다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제13권4호
• /
• pp.62-68
• /
• 2008

본 연구에서는 토양 이송 장치, 로터리킬른, RTO, 사이클론 및 백필터 등으로 구성되어 있고 이동이 가능한 저온열탈착 장치를 제작하여 현장유류오염토양의 처리시험을 수행하였다. 제작된 열탈착장치는 LPG를 연료로 사용하고 배출되는 가스를 RTO를 통하여 재순환하는 방식을 적용하여 경제적인 운전이 가능하도록 하였다. 장치의 현장시험을 위하여 경유와 $C_30$ 이상의 heavy oil로 혼합 오염된 현장토양(2,690 mg TPH/kg soil) 을 먼저 선별기를 통해 50 mm 이하의 입경을 가진 토양으로 채 분리한 후, LTTD 장치의 로터리킬른에 체류시간 15분 조건에서 시간당 7$m^3$의 양으로 투입하였다. 열탈착장치의 온도를 각각 평균 $567^{\circ}C$와$692^{\circ}C$로 조정한 후 오염토양의 정화 운전을 수행한 결과, 배출되는 정화토양의 TPH 농도는 각각 46 mg/kg과 32 mg/kg로서 각각 평균 98.3과 98.9%의 높은 정화 효율을 얻을 수 있었다.

• 열처리공학회지
• /
• 제36권5호
• /
• pp.311-317
• /
• 2023

An autofilter is a device that removes impurities contained in heavy fuel oil used in diesel engines of ships or power plants, and also automatically removes impurities accumulated in the filter through a reverse washing function. The reducer-integrated motor serves to rotate the filter at low speed to enable reverse automatic cleaning in the autofilter device. To achieve a low speed of 0.65 to 0.75 rpm in a reducer-integrated motor, a small motor that can operate at 97rpm at a rated voltage of 110 V and 112.5 rpm at 220 V is required. Additionally, a large gear ratio of 1/150 is required. To ensure the durability and reliability of these reducers, the strength of the gear must be evaluated at the design stage. In general, there is a limit to evaluating the stress and strain state according to the vibration characteristics acting on each gear in the driving state of the reducer through quasi-static analysis. Therefore, in this study, the operation characteristics of the auto filter's reducer-integrated motor were first analyzed using the rigid body dynamics analysis method. Then, this rigid body dynamics analysis model was extended to a flexible multibody dynamics analysis model to analyze the stress and strain states acting on each gear and evaluate the design feasibility of the gear.

• 자원환경지질
• /
• 제24권3호
• /
• pp.245-260
• /
• 1991

Surficial dispersion patterns of heavy metals and toxic elements (U, Mo, Cu, Zn, Fe, Mn, Co, Cr, V, Ni, Pb, and Cd) were investigated in the Dukpyungri, Goesan area covered with low grade uranium-bearing black shales. Maximum abundance of U in the black shale was 455ppm. Radioactivity was counted at a maximum of 7cps in black shales, and was less than 0.5cps in shales, slates, and oil shales of the control areas. Enrichment of Mo, V, Cu, Zn, Cd, and Pb in black shales is particularly characteristic compared with shales, slates, and oil shales of the control areas, whereas contents of Mn, Cr, Co, and Th in all rock samples tend to be almost similar. Residual top soils (0~15cm depth) over black shales show high contents of Mo, Cu, Zn, Ni, Cd, and V in comparison with the control areas. Contents of trace elements in subsoils (15~30cm depth) were higher about one and half times than those in topsoils. Average contents of Mo, Cu, Pb, Zn, Cd and V in garden soil and playground soil of an elementary school in Dukpyungri, Goesan area, were high about two to fifteen times compared with the control areas. Contents of trace elements in stream sediments were higher from two to eight times than those in residual soils. Sodium, AI, K, V, Cr, and Fe were more enriched in the roots of pine than in the twigs of pine. Contents of Li, AI, V, Ni, Cd, Fe, and Co were higher in the roots of azalea than in the twigs of azalea. Enrichment of P, Ca, and Mg was remarkable in the twigs of both pine and azalea. Biological absorption coefficients for essential elements (Zn, P, Mn, Ca and K)tend to be high, whereas those for the non-essential elements.(Ba, Ti, V, and Mo) and toxic elements(Cr, Co, Pb and Ni) be low. Less mobile elements (Pd, Cd, and Co) tend to show anomalies with higher contrast than more mobile elements(Mo, V, Zn, Cu and Ni) in the area covered with black shales.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제30권5호
• /
• pp.400-405
• /
• 2004

Angiogenesis inhibition is major concern to cancer chemotherapy and many studies about compound inhibiting angiogenesis is in progression. The long-known preventive effect of plant-based diet on tumorigenesis and other chronic diseases is well documented. Especially soy extract, genistein, is known to be potent angiogenesis inhibitor and prevent development and progression of tumor. In the present study, the effect of angiogenesis on tumorigenesis and chemopreventive effect of genistein by angiogenesis inhibition in hamster buccal pouch oral carcinigenesis model induced by 7.12-dimethylbenza(a)nthracene (DMBA) was studied. Forty eight Syrian Golden young adult hamsters (150-200 gm) were divided into two groups. In control group, 0.5% DMBA in heavy mineral oil was applied to hamster buccal pouch three times a week and in experimental group, 0.1 mg of genistein is administered orally everyday in addition to DMBA application. The animals were euthanized from 2 weeks to 16 weeks with interval of 2 week. H&E staining and immunohistochemistry was performed to evaluate microvessel density by using factor VIII-related antigen and avidin-biotin technique. Microvessels per area was quantified and compared between control and experimental group statistically. The results were as follows. 1. Microvessel density was increased time dependently in both groups and especially the increase was significant from 12 weeks to 16 weeks. 2. When comparing both group, the experimental group showed significantly low microvessel density than control group in 12 weeks (p=0.043), 14 weeks (p=0.050), 16 weeks (p=0.037). Based on these results, it was concluded that genistein influenced oral carcinogenesis by angiogenesis inhibition.

• 열처리공학회지
• /
• 제28권6호
• /
• pp.300-309
• /
• 2015

The aim of the present study was to predict the variations in microstructure and deformation occurring during gas carburizing and quenching processes of a SCM420H planetary gear in a real production environment using the finite element method (FEM). The motivation for the present study came from the fact that previous FEM simulations have a limitation of the application to the real heat treatment process because they were performed with material properties provided by commercial programs and heat transfer coefficients (HTC) measured from laboratory conditions. Therefore, for the present simulation, many experimentally measured material properties were employed; phase transformation kinetics, thermal expansion coefficients, heat capacity, heat conductivity and HTC. Particularly, the HTCs were obtained by converting the cooling curves measured with a STS304 gear without phase transformations using an oil bath with an agitator in a real heat treatment factory. The FEM simulation was successfully conducted using the aforementioned material properties and HTC, and then the predicted results were well verified with experimental data, such as the cooling rate, microstructure, hardness profile and distortion.

• Nuclear Engineering and Technology
• /
• 제52권2호
• /
• pp.248-257
• /
• 2020

This study presents an initial design for a novel system consisting in a coupled nuclear reactor and a phase change material-based thermal energy storage (TES) component, which acts as a buffer and regulator of heat transfer between the primary and secondary loops. The goal of this concept is to enhance the capacity factor of nuclear power plants (NPPs) in the case of high integration of renewable energy sources into the electric grid. Hence, this system could support in elevating the economics of NPPs in current competitive markets, especially with subsidized solar and wind energy sources, and relatively low oil and gas prices. Furthermore, utilizing a prismatic-core advanced high temperature reactor (PAHTR) cooled by a molten salt with a high melting point, have the potential in increasing the system efficiency due to its high operating temperature, and providing the baseline requirements for coupling other process heat applications. The present research studies the neutronics and thermal hydraulics (TH) of the PAHTR as well as TH calculations for the TES which consists of 300 blocks with a total heat storage capacity of 150 MWd. SERPENT Monte Carlo and MCNP5 codes carried out the neutronics analysis of the PAHTR which is sized to have a 5-year refueling cycle and rated power of 300 MW_th. The PAHTR has 10 metric tons of heavy metal with 19.75 wt% enriched UO₂ TRISO fuel, a hot clean excess reactivity and shutdown margin of $33.70 and -$115.68; respectively, negative temperature feedback coefficients, and an axial flux peaking factor of 1.68. Star-CCM + code predicted the correct convective heat transfer coefficient variations for both the reactor and the storage. TH analysis results show that the flow in the primary loop (in the reactor and TES) remains in the developing mixed convection regime while it reaches a fully developed flow in the secondary loop.

• 대한기계학회논문집
• /
• 제18권12호
• /
• pp.3276-3286
• /
• 1994

In most direct contact liquid-liquid heat exchangers, oil or hydrocarbon with a density less than water is normally used as dispersed working fluid. The main difficulty that arises with this arrangement lies in the control of the interface at the top of the column. When it is connected with a solar collector which uses water as its working fluid, the main difficulties arise from the fact that the water can be frozen during winter time. In order to solve these problems and to demonstrate the technical feasibility of a direct contact liquid-liquid heat exchanger, liquids heavier than water with low freezing temperature has been utilized as dispersed phase liquids in a small laboratory scale model made of pyrex glass. In the present investigation, dimethyl phthalate(C/sub 6/H/sub 4/)COOCH/sub 3/)/sub 2/) and diethyl phthalate (C/sub 6/H/sub 4/(CO/sub 2/C/sub 2/H/sub 5/)/sub 2/) are utilized as heavy dispersed phase working fluids. The results of the present investigation the technical in the utilization of heavier dispersed working liquid in the spray-column liquid-liquid heat exchanger for a solar system. The overall average temperature difference along the column is found to be almost half of the initial temperature difference between the dispersed and the continuous phase. Despite the fact that the two phthalates tested in the experiment differ significantly in some of their physical properties, the volumetric heat transfer coefficients in terms of dispersed fluid superficial velocities were found to be similar for both phthalates tested.

• 혜화의학회지
• /
• 제13권2호
• /
• pp.197-204
• /
• 2004

Now many sustitution and false articles is used in korea instead of chenpi. To use chenpi correctly, we will make a quilitative certificational plan of chenpi to investigate all of lieraturea, records and documents. And we could reach conclusions as folloews. 1) Source In china source of Chen-pi is pericarp of citrus reticula Blanco(Family;rutaceae)and in korea source of Chen-pi is pericarp of citrus unshiu Markovich(Family;rutaceae). Though source of both countries are not same, it has no problems because of containing family plants and culture variants. 2) Harvesting and processing After the peel attained full growth, wash cleanly in water. And dry in shade or in low temporature at state of eliminating pericarp. 3) Quality (1) Functional standards Exocarp is soft and clear yellow with numerous oil sports. The less white mesocarp is the better. (2) Physicochemical standards We need to suggest new standards about hesperidin to various conditions by processing methods and storing time. The loss on drying is less than 13.5%. Ash content is less than 4.0%. A standard capacity of hesperidin is more than 4.0%. The content of heavy metal is less than 30 ppm. We can not detect reminding agricultural medicines.