• Korean Chemical Engineering Research
• /
• v.56 no.1
• /
• pp.29-41
• /
• 2018

Separating a mixture having an azeotrope or low relative volatility with single distillation column is difficult. Separating water-acetic acid mixture and water-ethanol mixture with a distillation column consumes a lot of energy. Pervaporation membrane can be used to separate the mixture in the concentration region where separation is difficult with distillation. We simulated a distillation-membrane hybrid process where membrane is located on the head of the distillation column for efficient separation of water-acetic acid and water-ethanol mixture. Permeability data were obtained from experiments and literature. We formulated an optimization problem for the process with total annual cost (TAC) as an objective function and major design variables as optimization variables. Major optimization variable affecting TAC of the hybrid process was shown to be distillate concentration. We also suggested a simplified optimization procedure to get a close-to-optimal solution.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.208-213
• /
• 2011

Seoul Metropolitan Rapid Transit Corporation has 148's stations. Total length is 152km and most of the station is located in the basement and Groundwater occur inflow of 700,000 tons per day. Groundwater is treated as a natural flow way instead of artificial ways. Therefore, most of the collection wells is located in the low place or station for the efficient induction and collecting water. Manhole overtopping is occurring frequently because groundwater is concentrated in the drain pipe near the collecting well and heavy rainfall in summer. As a result, ballast contamination and radon levels are increased in tunnel. This paper introduces a solution is increasing overflow in tunnel, which introduces drainage system of non-motorized that uses differencial head between collecting well and manhole.

• Korean Journal of Pharmacognosy
• /
• v.16 no.4
• /
• pp.221-226
• /
• 1985

To screen biologically active components of the higher fungi of Korea, the dried carpophores of Auricularia polytricha were extracted with water. The extract was examined for acute toxicity in ICR mice. A low molecular weight toxin of this fungus was purified by acetone precipitation followed by cellulose, silica gel and LH-20 Sephadex column chromatography. Major symptoms of this toxin were eye extrusion, hair erection, trembling of head, paralysis, rapid running or moving before death and depression of respiration. The median lethal doses of the total extract were 1.25 g/kg and 4.18 g/kg by i.p. and p.o. administrations, respectively. The amounts of one mouse lethal unit (MLU) of the total extract and final fraction that killed a 20-g mouse within 30 minutes were 28.5 mg/mouse and 12 mg/mouse, respectively.

• Journal of computational fluids engineering
• /
• v.16 no.1
• /
• pp.14-21
• /
• 2011

Super-cavitating flows around under-water bodies are being studied for drag reduction and dramatic speed increase. In this paper, high speed super-cavitating flow around a two-dimensional symmetric wedge-shaped body were studied using an unsteady Reynolds-averaged Navier-Stokes equations solver based on a cell-centered finite volume method. To verify the computational method, flow over a hemispherical head-form body was simulated and validated against existing experimental data. Various computational conditions, such as different wedge angles and caviation numbers, were considered for the super-cavitating flow around the wedge-shaped body. Super-cavity begins to form in the low pressure region and propagates along the wedge body. The computed cavity lengths and velocities on the cavity boundary with varying cavitation number were validated by comparing with analytic solution.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.609-612
• /
• 1999

Recently, the antiwashout underwater concrete with an antiwashout admixtures has been increasingly used for underwater structures. However, the credibility of antiwashout underwater concrete was brought up as problems because it seldom was applied to fields. In this study, experiments were made on the basic properties of antiwashout underwater concrete replaced with fly ash up to 30% to improve its properties. Resultant to the test, we got the results as follow; funnel flow time was decreased, the slump flow was increased and the elevation of head was decreased rapidly whereas the amount of suspended solids became high, pH became low. In view of 70%, the standard ratio of compressive strengths between cast in water and in air, it was obtained the result that the ratio was over 90% at 28days.

• Journal of fish pathology
• /
• v.26 no.1
• /
• pp.11-17
• /
• 2013

The cadmium (Cd) toxicological effects on the fertilized eggs, embryos and larvae were investigated in olive flounder, Paralichthys olivaceus water-borne exposed to Cd. The survival rate and hatching success of the embryos significantly diminished in treated groups in dependence of the Cd concentration. Significant differences were found at ${\geq}30{\mu}g\;L^{-1}$ exposed groups compared to the control group. A significant increase of malformation of the embryo was observed at ${\geq}20{\mu}g\;L^{-1}$ exposed groups. They usually include such symptoms as clouded yolk-sac abnormality, fin erosion and spinal curvature. A significant reduction in the survival rate of the larvae was observed in ${\geq}20{\mu}g\;L^{-1}$ exposed groups with accompanied by the disorder. Notably, in larvae, a concentration as low as $10{\mu}g\;L^{-1}$ exposed groups caused significant elevated abnormalities that is incidences of spinal cord deformation, abnormal eyes, deformation of the head region and severe developmental delay.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.10a
• /
• pp.169-178
• /
• 2006

The pumped-storage power system is the one of the hydroelectric power systems, generating electricity with hydraulic head difference. In this system, the electricity is produced during the hours of peak demand by using water that has been pumped into an upper reservoir from a lower reservoir during the hours of low demand. Generally, the system consists of an under-ground power house and tunnels such as the headrace, pressure, and tailrace tunnels. The Chungsong pumped-storage power station is the sixth one In the pumped-storage power station in Korea. Both the regional self-government and the population of chungsong -Goon had made a great effort to draw this power station construction into this area. The proposed Chungsong pumped-power station construction project was accepted by the central government as a part of the national electricity plan for the first time in Korea.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.27 no.1
• /
• pp.3-15
• /
• 2001

The bilayer forming ability of pseudo-ceramide PC104 in octanoic acid/water/n-octyl $\beta$-D-glucoside mixtures was investigated through the phase diagram. Because of its low solubility in water and of its crystallization, pseudoceramide PC104 was dissolved in octanoic acid, which is nontoxic additive for foods and cosmetics. The mixtures formed four different phases (L1, L2, LC and two phases). Depending on the concentration of PC104 in octanoic acid, the region of each phase was extended or contracted. On the contrary to the region of L2, regions of lamellar phase and L1 phase were expanded. The bilayer-forming ability of PC104 was explained on the basis of concentration of PC104 at interface and interaction between PC104 and octanoic acid. From FT-IR results, it was found that the interactions of PC104’s polar head group with octanoic acid increased as the amount of PC104 in octanoic acid increased. Also emulsion size and size distribution have been studied depending upon the emulsification path. droplets of emulsion prepared from lamellar phase were smaller and more homogeneous compared to those of emulsions formed from L2 phase.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.643-643
• /
• 2012

Increasing energy prices and growing concerns about global warming address the need to improve energy self-sufficiency in many industrial and municipal sectors. Wastewater treatment plants (WWTPs) are representative of energy-consuming facilities in Korea, accounting for 5% of national energy consumption. We present renewable energy technologies and energy self-sufficiency scenarios in a municipal WWTP ($30,000m^3d^{-1}$) located in Yongin, South Korea. By employing photovoltaics (PV, 135 kW), small hydropower turbine (10 kW), and thermal energy from treated effluent (25 RT: refrigeration ton) within the WWTP, a total of 142 tonne of oil equivalent (toe) of energy was estimated to be generated, accounting for $365ton\;CO_2\;yr^{-1}$ of greenhouse gas emission reduction. Core renewable technologies under consideration include 1) hybrid solar PV system consisting of fixed PV, dual-axis PV, and building integrated PV, 2) low-head small hydropower plant specifically designed for treated effluent, 3) effluent heat recovery system for heating and air conditioning. In addition to these core technologies, smart operation and management scheme will be presented for enhancing overall energy savings and distribution within the WWTP.

• Transactions of the Korean hydrogen and new energy society
• /
• v.30 no.6
• /
• pp.629-634
• /
• 2019

Dicyclopentadiene is a low viscosity resin which forms a poly-dicyclopentadiene rapidly through ring opening metathesis polymerization (ROMP). This poly-dicyclopentadiene has outstanding properties of low-temperature, water and impact resistances. Due to these advantages, military and offshore structures try to apply the DCPD composites by using liquid composite molding process. In this study, 14%, 38% volume fraction fiber glass strand mat reinforced p-DCPD composites processed by structural reaction injection molding (S-RIM) which has resin-catalsyt mixing head and glass fiber preform in the mold. Additionally, S-RIM numerical analysis was conducted to predict the process time depending on fiber volume fraction and mold temperature. The process time is shorter when it has the lower fiber volume fraction or the higher mold temperature. At higher mold temperature, it is necessary to set the maximum mold temperature considering the resin curing time.