• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2017년도 학술발표회
• /
• pp.67-67
• /
• 2017

급속한 산업화와 도시화로 인하여, 투수지역은 감소함으로써, 개발전과 다른 지표, 지표하 유출이 나타난다. 이에 대한 대안으로 최근 저영향개발 (LID)이 수문학적 및 환경, 생태적 개선으로 대안으로 대두 되고 있다. 이에 많은 연구자들이 EPA SWMM 모델의 이용하여 LID 설치 전, LID를 모의하였으나, 불포화토양 및 토양 내의 matric head에 대한 고려가 없어 정확한 LID 모의가 힘든 실정이다. 이에 본 연구에서 상세한 토양 모의가 가능 HYDRUS를 이용하여, SWMM-HYDRUS 모델을 개발하였다. EPA SWMM 모델의 경우, 가장 상단의 layer에서 green ampt equation을 이용하여 침투량을 계산 후, 다음 layer에서 Darcy eqation을 이용하여 토양 물이동을 계산되어진다. 하지만 기존의 SWMM모델의 경우, 불포화토양내의 물 흐름에 대한 고려와 Matric head와 Pond depth에 대한 고려가 없어, LID 모의 시 한계점이 나타났다. 이에 본 연구에서는 이러한 한계점을 개선하기 위하여, 기존의 EPA SWMM의 LID 모듈을 Van Genuchten's equaton과 Richard Equation을 이용하여 정확한 토양 물 흐름을 계산하는 HYDRUS을 SWMM 모델에 결합하여, 더욱 정확한 LID 모의를 실시하였다. 개선된 SWMM-HYDRUS 모델의 모의 결과, 기존의 SWMM에서 한계점을 보여주는 Metric head를 고려하여 불포화 침투가 이루어지며, 또한 포화 후 LID 위에 존재하는 Pond depth를 고려해주는 결과가 나타났다. 향후 개발된 SWMM-HYDRUS모델를 이용하여 LID를 검증 시 기존의 모델보다 정확한 모의가 가능하다.

• 한국유체기계학회 논문집
• /
• 제17권5호
• /
• pp.67-71
• /
• 2014

Recently, the cross flow turbine attracts more and more attention for its good performance over a large operating regime at off design point. This study adopts a very low head cross flow turbine that has barely been studied before, and investigates the effect of air layer on the performance of the cross flow turbine. As open duct is applied in this study and free surface model is used between the air layer and water, an engineering definition of efficiency, instead of traditional definition of efficiency, is used. As torque at the runner fluctuates up and down at a reasonable limit, statistical method is used. Pressure and water volume fraction contours are shown to present the characteristics of air-water flow. With constant air suction in the runner chamber, the water level gradually drops below the runner and efficiency of the turbine can be raised by 10 percent. All considered, the effect of air layer on the performance of turbine is considerable.

• 한국수자원학회논문집
• /
• 제57권4호
• /
• pp.301-310
• /
• 2024

강수의 공간적·시간적 불균형이 물관리를 어렵게 하고 있다. 기후변화로 인해 강수의 불균형이 심화되고, 가뭄과 홍수가 빈번하게 발생하고 있다. 또한 가뭄과 홍수의 강도가 심화되어 기존의 물관리 시스템을 어렵게 만들고 있다. 2022년 6월부터 2023년 6월까지 영섬유역의 주요 수자원시설 저수율이 대부분 30% 이하였으며 유역 내 가장 용수 의존도가 높은 주암댐의 경우에 역대 최저 저수율인 20.3%까지 하락하였고 평림댐은 2023년 5월 4일 최저 저수율 27.3%를 기록하였다. 평림댐은 2022년 봄부터 강수량 부족으로 2022년 6월 19일 가뭄 관심 단계가 발령되었고 연이어 7월 2일 가뭄 주의 단계, 8월 21일 가뭄 심각 단계에 진입하였다. 수양제와 연계 운영이 가능한 평림댐은 관리기관이 다르다. 그럼에도 불구하고 가뭄 상황에서 유기적 연계 운영을 통해 평림댐에서 저수위에 도달하지 않고 3개군 급수인구 63,000명에게 안정적으로 용수를 공급할 수 있었다. 한정된 수자원 활용을 극대화할 수 있도록 유역간, 수원간 물이동을 원활하게 이동 가능 방안을 검토하여 수요자 중심의 물공급 시스템을 갖추어 기후변화로 인한 물부족 상황에 대비해야 한다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 추계 학술대회논문집
• /
• pp.213-217
• /
• 2005

In this study the water including sediment is assumed that the density is different from fresh water. And the phenomenon inhaled by low pressure around the pipe is numerically simulated in two dimension. The simulation is done using finite difference method in rectangular staggered mesh system and Navier-Stokes equations and continuty equation are employed as governing equations. The method of Irregular leg lengths and stars are adopted to satisfy boundary condition of body boundary. Marker-Density method is used to calculate the density of mixed flow. Also SGS turbulence model is applied to consider vortex smaller then grid at high Renolds number. This study is to analyze inhalation phenomenon of mixed flow with sediment and to verify the numerical method for mixed flow. To verify the numerical results are compared with experimental results

• 한국농공학회지
• /
• 제41권5호
• /
• pp.77-85
• /
• 1999

Irrigation pipeline systems have been recently adopted for irrigation purposes, which was thought to improve irrigation efficiencies. However, if hydraulic characteristics are not evaluated in designing , overpressure due to waterhammer may occur and result in serious problems. Therefore, in this study a model was formulated to simulate unsteady motion of water in a pipeline resulting from valve closure, the applicability of the model owas tested with fiedld data, and the results showed good agreement in maximum piezometric head. Also, simulated maximum piezometric head was compared with designed piezometric head computed by empirical method, and maximum piezometric head in a pipeline resulting from valve closure was simulated and analyzed with varing surge tank's position and diameter.

• 한국기계가공학회지
• /
• 제20권2호
• /
• pp.107-119
• /
• 2021

The cross-flow turbine is one of the most famous and widely used hydraulic power systems for a long time. The cross-flow turbine is especially popular in many countries and remote regions where off-grided because of its many benefits such as low cost, high efficiency at low head, simple structure, and easy maintenance. However, most modern turbines, including the cross-flow turbine, are unsuitable for the ultra-low head situation, known as less than 3m water head or zero head with over 0.5m/s flow velocity. In this study, we demonstrated a 20kW class inverted-type cross-flow turbine's performance. First, we reevaluated our previous studies and introduced how to design the inverted-type cross-flow turbine. Secondly, we fabricated the 20kW class inverted-type cross-flow turbine for the performance test. And then, we designed a testbed and installed the turbine system in the demonstration facility. In the end, we compare the demonstration with its previous CFD results. The comparing result shows that both CFD and real model fitted on guide vane angle at 10 degrees. At the demonstration, we achieved 42% turbine efficiency at runner speed 125 RPM.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.216-227
• /
• 2005

The head penetrations for control rod drive mechanism and instrumentation systems are installed at the reactor pressure vessel head of PWRs. Primary coolant water and the operating conditions of PWR plants can cause cracking of these nickel-based alloy through a process called primary water stress corrosion cracking (PWSCC). Inspection of the head penetrations to ensure the integrity of the head penetrations has been interested since reactor coolant leakages were found at U. S. reactors in 2000 and 2001. The complex geometry of the head penetrations and the very low echo amplitude from the fine, multiple flaws due to the nature of the see made it difficult to detect and size the flaws using conventional pulse-echo UT methods. Time-of-flight-diffraction technique, which utilizes the time difference between the flaw tips while pulse-echo does the flaw response amplitude from the flaw, has been selected for this inspection for it's best performance of the detection and sizing of the head penetration see flaws. This study defines the limits of the detectable and accurately sizable minimum flaw size which can be detected by the General TOFD and the Delta TOFD techniques for circumferentially and axially oriented flaws respectively. These results assures the reliability of the inspection techniques to detect and accurately size for various kind of flaws, and will also be utilized for the future development and qualifications of the TOFD techniques to enhance the detecting sensitivity and sizing accuracy of the flaws of the reactor head penetrations in nuclear power plants.

• 대한기계학회논문집B
• /
• 제20권1호
• /
• pp.237-243
• /
• 1996

Current low head and small scale hydroturbines have limitations in the minimum required head and flow rate for efficient operation. This study attempts to develop a new concept hydroturbine which is expected to run efficiently even in very low head and small flow rate, so that the limitations on the conventional small scale hydropower could be alleviated and competition with other alternative energy sources in the economic respect could be attained. A small scale catapillar track- hydroturbine was fabricated and the performance test was carried out in a water tunnel over the head range of H = 0.8 m ~ 1.26 m. The peak turbine efficiency was 41.3% at the speed ratio of 0.6, and the turbine loss was mostly due to the friction at the chain drive used for power transmission from the runner to the shafts. This type of turbine is expected to become competitive when some improvement in the power transmission mechanism is made.

• 한국유체기계학회 논문집
• /
• 제17권5호
• /
• pp.19-26
• /
• 2014

The cross flow turbine attracts more and more attention for its relatively wide operating range and simple structure. In this study, a novel type of micro cross flow turbine is developed for application to a step in an irrigational channel. The head of the turbine is only H=4.3m and the turbine inlet channel is open ducted type, which has barely been studied. The efficiency of the turbine with inlet open duct channel is relatively low. Therefore, a guide nozzle on the turbine inlet is attached to improve the performance of the turbine. The guide nozzle shapes are investigated to find the best shape for the turbine. The guide nozzle plays an important role on directing flow at the runner entry, and it also decreases the negative torque loss by reducing the pressure difference in Region 1. There is 12.5% of efficiency improvement by attaching a well shaped guide nozzle on the turbine inlet.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권2호
• /
• pp.284-290
• /
• 2006

For the case of high head and critical low flow rate range of micro hydropower resources, it requires very low specific speed turbines which are lower than conventional impulse turbine's specific speed. In order to satisfy the request for very low specific speed turbine with high efficiency, a new positive displacement turbine is developed. The performance characteristics of the new turbine is tested and compared with a conventional impulse turbine, which is used for automatic water faucet system. The purpose of present study is to develop an high performance turbine that can be used to extract micro hydropower potential of a water supply system. The test results show that the positive displacement turbine is much more efficient than the conventional turbine and it can sustain high efficiency under the wide range of operating conditions. The pressure pulsations at the inlet and outlet of the positive displacement turbine can be considerably minimized by using simple pressure damper.