• 한국농공학회논문집
• /
• 제56권6호
• /
• pp.149-158
• /
• 2014

The effects of spot cooling on growing ever-bearing strawberry in hydroponic cultivation during summer by spot cooling system was estimated in plastic greenhouse located in Pyeongchang. The temperature of cooling water was controlled by heat pump and maintained at the range of $15{\sim}20^{\circ}C$. Cooling pipes were installed in root zone and very close to crown. Spot cooling effect was estimated by applying system in three cases which were cooling root zone, crown plus root zone, and crown only. White low density polyethylene pipe in nominal diameter of 16 mm was installed on crown spot, and Stainless steel flexible pipe in nominal diameter of 15A was installed in root zone. Crown and root zone cooling water circulation was continuously performed at flowrates of 300 ~ 600 L/hr all day long. Strawberry yields by test beds were surveyed from Aug. 1 to Sep. 30. The accumulated yield growth rate compared with a control bed of crown cooling bed was 25 % and that of crown plus root zone cooling bed was 25 % and that of root zone cooling bed was 20 %. The temperatures of root spot in root zone cooling was maintained at $18{\sim}23.0^{\circ}C$ and that of crown spot in crown cooling was maintained at $19{\sim}24^{\circ}C$. Also, the temperatures of root spot in crown plus root zone cooling bed was maintained at $17.0{\sim}22.0^{\circ}C$ and that of crown spot was maintained at $19{\sim}25^{\circ}C$.

• 한국습지학회지
• /
• 제22권4호
• /
• pp.295-301
• /
• 2020

본 연구는 생태계 교란식물 가시박의 방제를 위한 기초자료 확보를 위해 금강수계 미호천을 대상으로 가시박의 개체밀도에 영향을 주는 환경요인과의 영향관계를 분석하였다. 가시박 서식지 토양입도 분석결과 가시박 개체밀도는 실트질 및 점토질 함량이 증가할수록 감소하는 것으로 나타났다. 가시박 서식지 대부분은 모래질 및 실트질 함량이 높았으며 점토질은 2% 이하로 낮게 나타났다. 유량의 경우 평수량 및 풍수량 초과 이벤트가 증가할수록 가시박 개체밀도는 낮아지는 경향을 보였는데, 이는 유량증가시 가시박의 침수로 인한 토양특성 변화와 성장장애 떄문이다. 수질은 가시박이 침수시 양분을 공급하는 역할을 하나 가시박이 물에 침수시 토양특성 변화로 성장장애를 받기 때문에 오히려 가시박 개체밀도가 낮아지는 경향을 보였다. 따라서 생태하천복원사업 등 하천의 자연성 회복을 위한 자연적 방제기법으로 가시박 성장환경을 가진 토양에 자연형 물길을 조성함으로써 물관리를 통한 기법이 적용 가능할 것으로 본다.

• 설비공학논문집
• /
• 제9권2호
• /
• pp.104-111
• /
• 1997

The freezing phenomenon of saturated water with the supercooled region in a horizontal circular cylinder has been studied experimentally by using the holographic real time interferometry technique. From the experiments, it was found that there were three types of freezing patterns. The first is the annular ice layer growing from the cylinder surface at a high cooling rate; the next is the asymmetric ice layer at a moderate cooling rate; and the last is the instantaneous ice layer growth over the full region at lower cooling rate. As the water was coolde from room temperature to the subfreezing point passing through the density inversion point, the freezing pattern was largely affected by the inversion phenomenon, which had much effected the free convection and was susceptible to influences from the cooling rate. When the cooling rate is high, supercooling energy is released before the water is sufficientry mixed by free convection. On the other hand, when the cooling rate is low, there is much time for the water to be mixed by free convection. This seems to be the reason why the different ice layer growths occur.

• 한국환경과학회지
• /
• 제11권1호
• /
• pp.25-32
• /
• 2002

In order to control of water quality in Jeju harbor, variation of physical oceanographic environments was estimated using material cycle model. It is composed of the three-dimensional hydrodynamic model for the simulation at water flow and material cycle model for the simulation of water quality. The three dimensional hydrodynamic model simulation of the circulation and mixing in Jeju Harbor has been conducted forced by Sanzi River Discharge, Tidal elevation, wind and Solar heat in case of August and November, 2000 and February and May, 2001, respectively. The results of numerical model and observation show that the model can produce realistic results of current in the harbor. The monthly variation of velocity pattern are not so much changed are found In Jeju Harbor. The residual current was forced by temperature, salinity, density, wind and tidal current. The residual current of August, 2000 are the strongest among four month. It can be explained that the density effect can be important role in residual current at Jeju Harbor. As the results of salinity distribution simulation, very low concentration of all levels were simulated in August, 2000. The flowrate of Sanzi river was investigated 77,760 ㎥ /d in August, 2000. Therefore, pollutant loadings from Sanzi river should be considered for water quality management in Jeiu harbor.

• 한국환경과학회지
• /
• 제12권7호
• /
• pp.715-724
• /
• 2003

Distributional patterns of microalgae were studied in the tidal flats of Gamami Beach(Young-Gwang, Korea) from November 1999 to 2000 July. The tidal flats of Gamami Beach was composed mainly of sandy sediment. The concentrations of nutrients were low compared with other tidal flats. In the present study, 68 species of microalgal flora were identified. These were comprised of 25 species of benthic microalgae and 59 species of planktonic microalgae. Diatoms predominated the benthic microalgae with 96.0% of total species occurred. Dominant species were Amphora sp., Cocconeis sp., Coscinodiscus asteromphalus, Coscinodiscus sp., Nitzschia sigma var. intermedia, Nitzschia distans, Navicula spp., Paralia sulcata, Pleurosigma sp. Skeletonema coastatum, and Surirella sp. Among them, Amphora sp., Paralia sulcata, and species of Pleurosigma and Nitzschia were observed throughout the studied period. Planktonic microalgae of Gamami Beach was also predominated by diatoms. They occupied 88.1% of total planktonic microalgae. The density of microalgal population was higher in silty sediment than in sandy sediment. The population density of microalgae was higher in high tide zone than that in low tide zone. The density of the benthic microalgae in the surface layer of tidal flats showed increasing tendency for 2 hours after the beginning of ebb tide. On the contrary, benthic microalgal density of subsurface layer was decreased during the period. Concentrations of chlorophyll ${\alpha}$ from sediment and water were not synchronized during the study period. Therefore, the distributional patterns of the benthic microalgae and planktonic algae seemed not to be related. Chlorophyll ${\alpha}$ of water was highly related with the concentration of NH$_4$-N, whereas, chlorophyll ${\alpha}$ of sediment uas related with NO$_3$-N concentration.

• 수산해양교육연구
• /
• 제19권3호
• /
• pp.323-328
• /
• 2007

This paper was studied on the effect of the specific resistance of water on corrosion characteristics of STS 304 for gas boiler. The electrochemical polarization test of STS 304 for gas boiler was carried out. And the polarization resistance, uniform corrosion, corrosion behavior by impressed potential and corrosion sensitivity of STS 304 with specific resistance were considered. The main results are as following: 1) With being low the specific resistance of water, the polarization resistance and corrosion potential of STS 304 decreases, while corrosion current density increases. 2) Under constant impressed potential, the corrosion sensitivity of STS 304 is large with being low the specific resistance due to synergy effect of Cl ion.

• 한국식품영양과학회지
• /
• 제26권3호
• /
• pp.436-442
• /
• 1997

Corn starch was extruded under relatively low shear, high moisture, and low temperature. Puffing of corn starch dough was induced by injecting $CO_2$gas in the range from 0MPa to 0.09MPa. Piece density and compressive modulus for puffed corn starch were decreased by increasing the injection pressure to 0.07MPa, and increased above 0.07MPa. the microstructure of corn starch puffed with $CO_2$gas showed thick cell size, compared with those puffed with steam. RVA paste viscosity curves of corn starch puffed with $CO_2$had different patterns from those puffed with steam, probably resulted from partial gelatinization of starch. Water absorption and solubility were not significantly changed by $CO_2$injection pressure, but the average degree of polymerization was reduced by higher $CO_2$injection. The water absorption, water solubility, and the average degree of polymerization for corn starch puffed with $CO_2$were significantly lower than those puffed with steam.

• Membrane and Water Treatment
• /
• 제14권4호
• /
• pp.175-180
• /
• 2023

Mixed matrix membranes (MMMs) can be a promising alternative for the solution of dye removal from coloured effluents. Polymeric membranes are widely used due to their good film-forming ability, flexibility, separation properties, and cost. However, they have low mechanical, chemical, and thermal resistances. Moreover, the fouling of polymeric membranes is high because of their hydrophobic nature. Hence, there is an increasing interest in organic-inorganic hybrid membranes as a new-generation membrane material. It has been shown that carbon nanotubes have the potential to increase the material properties of polymers with their low density, high strength, hardness, and exceptional aspect ratio. In this work, carbon nanotubes blended MMMs were prepared and methyl orange removal efficiency of them was investigated. Compared to the bare membranes, MMMs showed not only increased hydrophilicity, water content, and pure water flux but also increased methyl orange rejection and flux recovery

• Journal of Ecology and Environment
• /
• 제41권3호
• /
• pp.45-53
• /
• 2017

Background: There have been many studies on the growth conditions of Zostera marina and Zostera japonica, but few studies have examined how spatial and temporal factors affect growth in established seagrass beds or the distribution range and shoot density. This study aims to clarify the factors that determine the temporal and spatial distribution of Zostera marina and Zostera japonica in the Seto Inland Sea east of Yamaguchi Prefecture. Methods: The study site is in Hiroshima Bay of the Seto Inland Sea, along the east coast of Yamaguchi Prefecture, Japan. We monitored by diving observation to confirm shoot density, presence or absence of both species and observed water temperature, salinity by sensor in study sites. Results: The frequency of occurrence of Zostera marina was high in all seasons, even in water depths of D.L. + 1 to -5 m ($80{\pm}34%$ to $89{\pm}19%$; mean ${\pm}$ standard deviation), but lower (as low as $43{\pm}34%$) near the breakwall, where datum level was 1 to 2 m, and it was further reduced in datum level -5 m and deeper. The frequency of occurrence of Zostera japonica was highest in water with a datum level of +1 to 0 m. However, in datum level of 0 m or deeper, it became lower as the water depth became deeper. Datum level +1 m to 0 m was an optimal water depth for both species. The frequency of occurrence and the shoot density of both species showed no negative correlation. In 2011, the daily mean water temperature was $10^{\circ}C$ or less on more days than in other years and the feeding damage by S. fuscescens in the study sites caused damage at the tips. Conclusions: We considered that the relationship between these species at the optimal water depth was not competitive, but due to differences in spatial distribution, Zostera marina and Zostera japonica do not influence each other due to temperature conditions and feeding damage and other environmental conditions. Zostera japonica required light intensity than Zostera marina, and the water depth played an important role in the distribution of both species.

• 생태와환경
• /
• 제43권4호
• /
• pp.513-517
• /
• 2010

The diel swarming of Moina macrocopa and the relationship between environmental factors were evaluated in a shallow reservoir. The littoral density of Moina macrocopa maintained low from night to noon, reached maximum density at the afternoon with compact swarms at the waters' edge, and dispersed after sunset. The recruitment of Moina macrocopa and changes of water temperature (r=0.709, p<0.001) and juvenile fish density (r=0.511, p=0.002) in the littoral zone showed a significant positive relationships. After the induction of diel horizontal migration toward littoral zone, therefore, direct juvenile fish predation pressure should be induced Moina macrocopa swarming.