• The Journal of Korean Medicine
• /
• v.37 no.1
• /
• pp.135-150
• /
• 2016

Research Methods: This research analyzed the data on those aged 20 and older from the Report on Korean Medicine Usage Research, which was conducted in 2011. The definitions of toxicity were defined by the presence of toxicity listed in the survey. The questions used in analysis were sex, age, household income, health insurance, medical fees, satisfaction rates on treatments, as well as the types of diseases and the presence of toxicity from treatments. The analysis was done through frequency analysis using SAS 9.2 and Fisher's Exact Test. Results: Toxicity occurred in 2.1% patients out of the 3518 studied. The types of toxicity were skin problems, such as hives and pruritus (34.7%), gastrointestinal problems (20.8%), neurological diseases (4.2%), liver(1.4%), kidney toxicity(1.4%), and others (22.2%). There were no differences in toxicity by sex, age, household income and the types of health insurances. However, toxicity were positively correlated with the increase in standard of education (p=0.0124). In addition, as treatment costs increased (p<0.0001) and satisfaction rates decreased, toxicity increased (p<0.0001). Toxicity increased in patients with low back pain (p=0.0429), hwabyung (p=0.0392), lumbar sprain (p=0.0004), correction body type (p=0.0118), growth (p=0.0045), and from motor accidents (p=0.0448). In logistic regression analysis, Toxicity were positively correlated with medical fees, and cancer treatment and negatively correlated with satisfaction rate on treatments. Conclusion: The toxicity that occurred in outpatients who used Korean medical clinics mostly happened in skin, digestive organs, nerves, livers, and kidneys toxicity. The occurrences differed by the Educational lengths, expensive costs of treatments, low satisfaction rates of the treatments, and cancer.

• Current Photovoltaic Research
• /
• v.4 no.3
• /
• pp.124-129
• /
• 2016

Recently industry has voiced a need for optimally designing the production process of low-cost, high-quality ingots by improving productivity and reducing production costs with the Czochralski process. Crystalline defect control is important for the production of high-quality ingots. Also oxygen is one of the most important impurities that influence crystalline defects in single crystals. Oxygen is dissolved into the silicon melt from the silica crucible and incorporated into the crystalline a far larger amount than other additives or impurities. Then it is eluted during the cooling process, there by causing various defect. Excessive quantities of oxygen degrade the quality of silicone. However an appropriate amount of oxygen can be beneficial. because it eliminates metallic impurities within the silicone. Therefore, when growing crystals, an attempt should be made not to eliminate oxygen, but to uniformly maintain its concentration. Thus, the control of oxygen concentration is essential for crystalline growth. At present, the control of oxygen concentration is actively being studied based on the interdependence of various factors such as crystal rotation, crucible rotation, argon flow, pressure, magnet position and magnetic strength. However for methods using a magnetic field, the initial investment and operating costs of the equipment affect the wafer pricing. Hence in this study simulations were performed with the purpose of producing low-cost, high-quality ingots through the development of a process to optimize oxygen concentration without the use of magnets and through the following. a process appropriate to the defect-free range was determined by regulating the pulling rate of the crystals.

• The Journal of the Korea Contents Association
• /
• v.20 no.8
• /
• pp.42-53
• /
• 2020

With the development of social network services, graph structures have been utilized to represent relationships among objects in various applications. Recently, a demand of subgraph matching in real-time graph streams has been increased. Therefore, an efficient approximate Top-k subgraph matching scheme for low latency in real-time graph streams is required. In this paper, we propose an approximate Top-k subgraph matching scheme considering data reuse in graph stream environments. The proposed scheme utilizes the distributed stream processing platform, called Storm to handle a large amount of stream data. We also utilize an existing data reuse scheme to decrease stream processing costs. We propose a distance based summary indexing technique to generate Top-k subgraph matching results. The proposed summary indexing technique costs very low since it only stores distances among vertices that are selected in advance. Finally, we provide k subgraph matching results to users by performing an approximate Top-k matching on the summary indexing. In order to show the superiority of the proposed scheme, we conduct various performance evaluations in diverse real world datasets.

• Journal of Advanced Navigation Technology
• /
• v.20 no.6
• /
• pp.519-527
• /
• 2016

The present study is concept research on the operation cost management of shipping firms, especially considering technology for economical ship operation of existing ships in units of voyage. The factors that influence economical ship operation management were identified by analyzing the current status of the shipping industry, the development of economical ship operation technologies, technological requirements, and the cost factors of ship operation. Economical operation of existing ships, especially, the economical operation of the units of each voyage, may minimize fuel cost and port charges. This requires low-load streaming cruise control, ballast control, optimal trim, optimal routing, terminal work efficiency improvement, and ship energy management. Optimal routing and terminal work efficiency improvement manage the time saved. To determine the low-load streaming, cruise control, ballast control, optimal trim and ship energy management are meeting the recommendations.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.3
• /
• pp.322-330
• /
• 2014

New effective techniques to repair "small" design errors in integrated circuits are presented. As semiconductor chip complexity increases and the design period becomes tight, errors frequently remain in a fabricated chip making revisions required. Full mask revision significantly increases the cost and time-to-market. However, since many "small" errors can be repaired by modifying several connections among the circuit blocks and spare cells, errors can frequently be repaired by revising metal layers. Metal only revision takes significantly less time and involves less cost when compared to full mask revision, since mask revision costs multi-million dollars while metal revision costs tens of thousand dollars. In our research, new techniques are developed to further reduce the number of metal layers to be revised. Specifically, we partition the circuit blocks with higher error probabilities and extend the terminals of the signals crossing the partition boundaries to the preselected metal repair layers. Our partitioning and pin extension to repair layers can significantly improve the repairability by revising only the metal repair layers. Since pin extension may increase delay slightly, this method can be used for non-timing-critical parts of circuits. Experimental results by using academia and industrial circuits show that the revision of the two metal layers can repair many "small" errors at low-cost and with short revision time. On the average, when 11.64% of the spare cell area and 24.72% of the extended pins are added to the original circuits, 83.74% of the single errors (and 72.22% of the double errors) can be corrected by using two metal revision. We also suggest methods to use our repair techniques with normal commercial vender tools.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.11
• /
• pp.1121-1128
• /
• 2016

Our country of agriculture suffers problems such as aging, population decline, agricultural decline etc. To solve this problem, in the country, it is interest in Smart Farm System, a convenient and efficient system for the production through the convergence of ICT technology and agriculture. However, because of expensive construction costs and difficulty in securing human resources and training for Operating system, they are struggling to spread the actual farmers. Therefore, it is necessary to develop smart farm techniques suitable for such customized domestic environment. This study designed a system for collecting environment date in a greenhouse based on the low-cost embedded devices, and designed and implemented for the Web application that a user can easily use system. The implementation of the system lowers deployment costs and is expected to increase largely the spread of Smart Farm it can be easily accessed by using the smart phone.

• Environmental and Resource Economics Review
• /
• v.20 no.1
• /
• pp.99-118
• /
• 2011

'Low Carbon, Green Growth' may be the achievable target in industry section, depending on whether less reliance on fossil-fuels use can bring higher productivity growth in the long run. This paper tests for the short-run and long-run effects of investment on energy-saving equipments on productivity growth in the Korean manufacturing industries. The investment in energy efficiency causes an increase in costs (measurement effect) in the short-run, but in the long-run likely improve energy intensity and reduce costs (positive real effect) despite the delay in new other investment for technical innovation (negative real effect). A 2SLS regression was attempted to deal with endogeneity of energy-saving investment. The productivity effects were tested for five manufacturing sub-industries showing relatively high energy intensity with annual time series data from 1982 through 2006. No productivity effects were accepted for all five sub-industries except Chemical products. Positive real effect was considered to be exceeded by negative real effect, resulting in decreased productivity growth for Chemical products.

• The Korean Journal of Health Service Management
• /
• v.1 no.1
• /
• pp.125-137
• /
• 2007

The current hospital industry is showing relatively low profitability in comparison with other industries due to the low medical fees and high costs. Therefore, our government presented the direction of improvement through model execution and support of the specialized hospitals. However, it is estimated that the specialized hospitals also will show differentiated management performances in accordance with their specialized fields due to the characteristics of medical treatment. Therefore, this study had attempted an analysis on the financial index in accordance with the weight of medical treatment items for the rehabilitative medicine department among the whole hospital groups through getting out of analyzing financial indices of individual hospitals centered at their costs. For this p개pose, this study had carried out its research by partially reciting the study on the plan for utilizing participations of private health resources to expand rehabilitative medicine services into the private people of the Korea Health Industry Development Institute(KHIDI). As its results, it was shown that the stability, profitability, activity and productivity of hospitals with high weight of medical treatment for the rehabilitative medicine department were lower than those for the general hospitals. To support smooth operations of these hospitals 'with high weight of medical treatment for the rehabilitative medicine department or of specialized rehabilitation hospitals, it is judged that the plan such as the support for hospital management fund and the additional recognition on the rehabilitative fees, etc. together with the actualization of medical fees must be provided for the institutions which are providing rehabilitative medical services more than the fixed percentage and being equipped with the sufficient medical equipment and personnel to do them.

• Archives of design research
• /
• v.15 no.1
• /
• pp.69-79
• /
• 2002

The Korean textile industry contributed much to the country's economic success during the 1970s-80s. Since the end of the 1980s, however, most of the Korean textile industry has begun to suffer from both high labor costs and skilled-labor shortage. During this period, such countries as China, Indonesia, and Malaysia began to gain strong foothold in the global textile market, mainly owing to considerably low label costs. To maintain competitiveness in the global textile market, the Korean textile industry should undergo a structural change. It should switch from the mass production of low quality design to selective praction of high quality and well-designed textiles. An cement of high value-added should be put into the textile product.: Usage of functional material, new processing technology, automation, pro-environmental dye shes, and strategic marketing is required. In this appear, I suggest ways and means to make the Korean textile design be good enough to compete in the global market.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.307-309
• /
• 2013

Diligence/Indolence records are the basic data at a human resource management and the essential data for measure salaries of employees. However, since the D/I systems using RFIDs or biometric sensors require hish costs to build and operate the D/I systems, it is difficult for to small business or self-employed business to use them. In this paper, we propose the Diligence/Indolence system to use the location identification of a smart phon. To locate the position of an employee, the WiFi signal of a smart phone and the wireless access point are exploited. Because the pre-owned hardware resources are used and initial building costs are low, it is easy for small business to use the proposed D/I system with low cost.