• The Journal of the Korea Contents Association
• /
• v.21 no.5
• /
• pp.877-888
• /
• 2021

This study used three types of temporary shelters, tents, and prefabricated houses provided by the Chinese government for victims after the Wenchuan earthquake in 2008 as case study objects. Through literature review, 12 evaluation items were selected from the social, economic, and environmental elements of the sustainability of residential space design to analyze and evaluate three types of temporary shelters, and derive their respective characteristics and problems. The analysis results show that the temporary centralized settlements and tents had problems such as imperfect infrastructure, poor sanitation, narrow living space, no personal space, and inconvenience in life. Prefabricated houses had problems such as high construction costs, non-environmentally friendly building materials, occupation of arable land, low recycling rate of materials, and environmental pollution by waste. The common problem of the three types of shelters was that the government took the lead in the construction and distribution of shelters, and the disaster victims passively accept government support. Therefore, disaster victims were not actively involved in the construction and management of temporary communities. Secondly, the designs of all three types of temporary shelters did not fully consider the psychological needs of the victims, especially the need for safe and hygienic personal space. Finally, this research proposes improvement plans for the problems in the sustainable design of three temporary shelters and the construction and management of temporary communities.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.3
• /
• pp.583-589
• /
• 2021

This study is a study on the development of virtual reality to prepare for the increase in disasters of households living with companion animals due to the increase of companion animals. The increase in single-person households and DINKs(Double Income, No Kid) along with the low birth rate and aging population is raising the risk of disasters caused by companion animals in particular. Among these disasters, there is an increase in the occurrence of fires primarily due to the raising of companion animals. Electric stove fires caused by pets are the most common fires. In particular, the frequency of electric stove fires caused by cats is the highest. Careful precautions by the owner are necessary to reduce fires caused by pets. Parenting of companion animals causes pet loss syndrome due to emotional exchange. There are injuries to pets in escalators and injuries to owners in elevators due to disasters caused by the owner's negligence. In order to reduce injuries on escalators and elevators, basic etiquette for using escalators and elevators with pets is required as basic etiquette. It is necessary to utilize virtual reality to reduce disasters caused by such companion animals. Virtual reality can be experienced without a physical space in advance training to overcome disasters, so real disaster cases can be experienced immersively. Therefore, learning how to reduce fires caused by companion animals, disasters caused by owner's negligence, and petloss syndrome through virtual reality will greatly contribute to disaster prevention and reduction of social costs.

• Journal of Korea Foundry Society
• /
• v.41 no.6
• /
• pp.550-557
• /
• 2021

With the advent of the fourth industrial revolution, the interest in the internet of things (IoT) in manufacturing is growing, even at foundries. There are several types of process data that can be automatically collected at a foundry, but considerable amounts of process data are still managed based on handwriting for reasons such as the limited functions of outdated production facilities and process design based on operator know-how. In particular, despite recognizing the importance of converting process data into big data, many companies have difficulty adopting these steps willingly due to the burden of system construction costs. In this study, the field applicability of IoT-based devices was examined by manufacturing devices and applying them directly to the site of a centrifugal foundry. For the centrifugal casting process, the temperature and humidity of the working site, the molten metal temperature, and mold rotation speed were selected as process parameters to be collected. The sensors were selected in consideration of the detailed product specifications and cost required for each process parameter, and the circuit was configured using a NodeMCU board capable of wireless communication for IoT-based devices. After designing the circuit, PCB boards were prepared for each parameter, and each device was installed on site considering the working environment. After the on-site installation process, it was confirmed that the level of satisfaction with the safety of the workers and the efficiency of process management increased. Also, it is expected that it will be possible to link process data and quality data in the future, if process parameters are continuously collected. The IoT-based device designed in this study has adequate reliability at a low cast, meaning that the application of this technique can be considered as a cornerstone of data collecting at foundries.

• Journal of Korean Society of Forest Science
• /
• v.111 no.4
• /
• pp.482-489
• /
• 2022

This study aimed to determine the optimal planting density of Fraxinus rhynchophylla assessed from the early growth performance at various planting densities over the 7-year period after planting. The study site was in Pyeongchang County, South Korea, and seedlings of 2-year-old (bare-root seedlings) F. rhynchophylla were planted at four densities (3,000, 5,000, 7,000, and 10,000 trees ha^-1) in March 2015. The survival rate, root-collar diameter (RCD), and height (H) were measured from 2015 to 2021, and the H/D (H/RCD) ratio and stem volume were calculated. The survival rate (84-97%) and H/D ratio (54.5-59.2%) were not affected by the planting density during the study period, but the RCD, H, and stem volume were significantly higher for 7,000 trees ha^-1 than for other planting densities. Especially, the stem volume (cm³ tree^-1) at 7 years after planting was highest for 7,000 trees ha^-1 (1,356.1), followed by 10,000 trees ha^-1 (958.6), 5,000 trees ha^-1 (773.0), and 3,000 trees ha^-1 (579.5). As the planting density increased, F. rhynchophylla seedlings showed initial rapid growth due to light competition, but relatively low growth at excessive planting densities. In the future, use of a suitable planting density considering planting costs should provide outstanding growth performance of F. rhynchophylla on plantations.

• Journal of Korea Trade
• /
• v.26 no.2
• /
• pp.45-64
• /
• 2022

Purpose - This paper examines South Korea's potential status as a carbon leakage country, and the level of risk posed by the Korean emissions trading scheme (ETS) for Korean industries. The economic effects of border carbon adjustments (BCAs) to protect energy-intensive Korean industries in the process of achieving the carbon reduction target by 2030 through the Korean ETS are also analyzed. Design/methodology - First, using the Korean Input-Output (IO) table, this paper calculates the balance of emissions embodied in trade (BEET) and the pollution terms of trade (PTT) to determine Korean industries' carbon leakage status. Analyses of the risk level posed by carbon reduction policy implementation in international trade are conducted for some sectors by applying the EU criteria. Second, using a computable general equilibrium (CGE) model, three BCA scenarios, exemption regulations (EXE), reimbursement (REB), and tariff reduction (TAR) to protect the energy-intensive industries under the Korean ETS are addressed. Compared to the baseline scenario of achieving carbon reduction targets by 2030, the effects of BCAs on welfare, carbon leakage, outputs, and trading are analyzed. Findings - As Korea's industrial structure has been transitioning from a carbon importing to a carbon leaking country. The results indicate that some industrial sectors could face the risk of losing international competitiveness due to the Korean ETS. South Korea's industries are basically exposed to risk of carbon leakage because most industries have a trade intensity higher than 30%. This could be interpreted as disproving vulnerability to carbon leakage. Although the petroleum and coal sector is not in carbon leakage, according to BEET and PTT, the Korean ETS exposes this sector to a high risk of carbon leakage. Non-metallic minerals and iron and steel sectors are also exposed to a high risk of carbon leakage due to the increased burden of carbon reduction costs embodied in the Korean ETS, despite relatively low levels of trade intensity. BCAs are demonstrated to have an influential role in protecting energy-intensive industries while achieving the carbon reduction target by 2030. The EXE scenario has the greatest impact on mitigation of welfare losses and carbon leakage, and the TAF scenario causes a disturbance in the international trade market because of the pricing adjustment system. In reality, the EXE scenario, which implies completely exempting energy-intensive industries, could be difficult to implement due to various practical constraints, such as equity and reduction targets and other industries; therefore, the REB scenario presents the most realistic approach and appears to have an effect that could compensate for the burden of economic activities and emissions regulations in these industries. Originality/value - This paper confirms the vulnerability of the Korean industrial the risk of carbon leakage, demonstrating that some industrial sectors could be exposed to losing international competitiveness by implementing carbon reduction policies such as the Korean ETS. The contribution of this paper is the identification of proposed approaches to protect Korean industries in the process of achieving the 2030 reduction target by analyzing the effects of BCA scenarios using a CGE model.

• Journal of Cadastre & Land InformatiX
• /
• v.51 no.2
• /
• pp.151-168
• /
• 2021

This study compared and analyzed the effect of the burden of household expenditure in the metropolitan and non-metropolitan areas on the intention to childbirth intention to married women using a panel logit model. To this end, this analysis targeted married women aged 25 to 39 who are highly likely to be fertile. The main results are as follows; First of all, it was confirmed that the economic power of spouse can be an important factor in the childbirth intention regardless of region. Second, it was found that the higher the satisfaction of marriage had a positive effect on the childbirth intention, and also higher the value that children must have, the higher the childbirth intention. Third, it was confirmed that the burden of household expenditure is the most important factor in the willingness to childbirth intention, excluding factors such as the number of existing children. In particular, the burden on education spending in both the capital region and non-capital region was found to be a key reason for the decrease in the childbirth intention. Lastly, the burden of household expenditure showed different effects on childbirth intention on depending on the region. Specifically, in the capital region, medical spending and loans had a greater impact, while, in the non-capital region, transportation and communication costs had a greater impact on childbirth intentions. Through the results, this study confirmed the implication that easing the burden on household expenditure is continuously necessary to enhance childbirth, and that discriminatory policy approaches are required depending on the area of residence.

• Journal of People, Plants, and Environment
• /
• v.24 no.2
• /
• pp.169-178
• /
• 2021

Background and objective: Education based on agricultural experience in school gardens is coming to the fore as a solution to reduce the negative effect of rapid urbanization and the development of information technology (IT) on students. Accordingly, this study aimed to investigate how parents of elementary, middle, and high school students in Korea perceive the value of education service using school gardens, as well as their willingness to participate in and pay for such service, and to utilize the results in a quantitative assessment of the socioeconomic value of the education service. Methods: A contactless online survey on the perceived value of education service using school gardens was conducted on 1,010 parents of elementary, middle, and high school students in Korea's five major districts from October 22 to 26 (5 days) of 2020 by M, a Korean specialized survey agency. The data collected was analyzed using SPSS for Windows 25.0 and Excel to obtain the frequency and ratio of each measured item. Results: The respondents had an average of 1.83, of which 52.8% were male. 55.3% of the respondents were aware of the education service using school gardens, and 27.9% experienced the service. When asked if they saw the educational service using school gardens as necessary, 79% answered in the affirmative. In terms of the difference in perception of the need for the service according to experience, 91.8% of the parents who experienced the service responded that it was necessary, indicating that it is important to provide opportunities to experience this service to expand the scope of service. 54.9% of all respondents responded they were willing to pay the costs required for school gardens. When income tax was used as a payment method, the average amount parents were willing to pay was 13,193 KRW, and the tax rate was 2.02%. Based on experience, those who experienced this service had a higher need and willingness to pay for the service than those who had not experience, but the actual amount or tax rate was low as they knew how it was operated. Conclusion: As basic research on the assessment of the value of agricultural experience education using school gardens, this study determined how parents perceive this form of education service as well as their willingness to participate and pay for the service. These findings can be used to systemize the assessment indicators and promote the value of the education service using school gardens, allowing students to maintain a healthy and happy school life through agricultural experience.

• Journal of the Society of Disaster Information
• /
• v.18 no.4
• /
• pp.883-890
• /
• 2022

Purpose: Currently, in the case of domestic fire fighting facility design, it is difficult to secure highquality manpower due to low design costs and overheated competition between companies, so there is a limit to improving the fire safety performance of buildings. Accordingly, AI-based firefighting design solutions were studied to solve these problems and secure leading fire engineering technologies. Method: Through AutoCAD, which is widely used in existing fire fighting design, the procedures required for basic design and implementation design were processed, and AI technology was utilized through the YOLO v4 object recognition deep learning model. Result: Through the design process for fire fighting facilities, the facility was determined and the drawing design automation was carried out. In addition, by learning images of doors and pillars, artificial intelligence recognized the part and implemented the function of selecting boundary areas and installing piping and fire fighting facilities. Conclusion: Based on artificial intelligence technology, it was confirmed that human and material resources could be reduced when creating basic and implementation design drawings for building fire protection facilities, and technology was secured in artificial intelligence-based fire fighting design through prior technology development.

• Journal of Nutrition and Health
• /
• v.56 no.1
• /
• pp.24-34
• /
• 2023

Purpose: The prevalence of diabetes mellitus (DM) continues to increase worldwide, and blood glucose control may reduce mortality from diabetic complications and healthcare costs. Mulberry twig (MT) has been used as a herbal medicine in Asia, and its antidiabetic efficacy has recently been reported, but research in this area is still limited. This study examined the antidiabetic effects of water extracts of MT in diabetic animals. Methods: Six weeks old male ICR mice were divided randomly into three groups; normal control (NC, n = 10), DM control (DC, n = 10), and MT (n = 10). Streptozotocin (STZ, 50 mg/kg/day) was injected intraperitoneally into mice in the DC and MT groups for 5 consecutive days. After 10 days of the last STZ injection, the mice in the MT group were administered orally with MT water extracts (5 g/kg body weight) for 16 days. Results: The MT water extracts ameliorated the swelling of the liver in the diabetic mice and reduced the elevated levels of fasting blood and plasma glucose, total cholesterol (T-CHO), low density lipoprotein-CHO, and the ratio of high density lipotrotein (HDL)-CHO/T-CHO. The liver triglyceride (TG) and glycogen contents were also significantly lower in the MT group mice than in the DC group. The small intestine disaccharidase activity was analyzed to understand the therapeutic effects and the mechanism of MT water extracts in diabetic animals. MT group mice showed reduced lactase and sucrase activity in the proximal part of the small intestine. On the other hand, body weight, plasma insulin, TG, HDL-CHO, and hepatic T-CHO levels were similar in the DC and MT groups. Conclusion: These results suggest that MT water extracts have antidiabetic effects and can be developed as a functional source to reduce the postprandial blood glucose or to prevent DM incidence.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.5
• /
• pp.577-585
• /
• 2023

Lateral torsional buckling causessafety accidentssuch as collapse accidents during erection. Therefore, anaccurate safety designshould be conducted. Lateral torsional buckling canbe prevented by reinforcing the end orreducing the unbraced length. The method ofreducing the unbraced length by installing a crossframe has high material and installation costs and low maintenance performance.In addition, structuralsafety may be deteriorated due to cracks. The end reinforcement method using Concrete Filled Half Pipe Stiffeneris a method ofreinforcing the end of a plate girder using a stiffenerin the form of a semi-circular column. This method increasesthewarping strength ofthe girder and increasesthe lateral torsional buckling strength.In thisstudy, the effect ofincreasing the warping strengthof plate girders with concrete filled half pipe stiffeners was confirmed. To verify the effect, the results ofthe designequationand the finite element analysis were compared and verified through a experiment. As a result, the plate girderwithCFHPS increased thewarping strengthand confirmed that the lateral torsional buckling strength was increased.